Input voltage: 90 V - 264 V
Output voltage: 3.3 V
Current: 1 A
Net weight - 0,072 kg Carton quantities - 100 pcs Carton weight - 10,2 kg Carton dimensions - 0.540x0.380x0.320 (m) AC inlet - W2E Length of cable - 1.4 m Connector - 2.1x5.5x11-S
Sunny
LINE CONDITIONER&SAVER • Voltage Optimization and protection function • Energy Saving Feature • Special management software for energy saving • Maintenance-free Thyristor Technology • Production in the power range of 10kVA – 1000kVA • ...
Input voltage: 208 V - 480 V
Current: 50 A - 570 A
Output frequency: 50, 60 Hz
• Long-lasting and stable thyristor technology • Voltage adjustment range: 0xVn% - 200xVn% • Output Current: 0A – 600A • Continuous operation at full load • Independent voltage adjustment on each phase • Soft-Start feature of Output ...
Input voltage: 20 V - 35 V
Output voltage: 24 V
Current: 4 mA - 20 mA
Product properties - Isolated power supply for intrinsically safe transmitters - DIN rail mountable - Compatible with all devices using standard HART® communication Applications - For high precision transmitters - ...
NIVELCO Process Control Co.
Features *Universal AC input/Full range *Protections:Short circuit/Over load/Over voltage *Cooling by free air convection *Can be installed on DINrail TS-35/7.5 or 1 *5Isolation class II *LED indicator for power on *100% full load burn-in ...
Input voltage: 0 V - 800 V
Output voltage: 1,200 V
Current: 100 A
FEATURES INCLUDE • Multi-Function Power Assembly • Compact Size –8.00” H X 17.60” W X 11.00” D • DC Bus Voltages to 850VDC • Snubber-less operation to 650VDC • Switching frequencies to over 20kHz • Protective circuitry with fail-safe ...
Applied Power Systems, Inc
Description TOPSwitch-JX cost effectively incorporates a 725 V power MOSFET, high voltage switched current source, multi-mode PWM control, oscillator, thermal shutdown circuit, fault protection and other control circuitry onto a monolithic ...
Input voltage: 264 V
Output voltage: 3.3 V - 24 V
Current: 1, 33, 40, 60 A
TDK-Lambda's Alpha series of 1000 to 1500W modular supplies are fully configurable and can provide between one and 16 adjustable outputs. Up to 8 modules – single or dual outputs – can be fitted with output voltages from 1.8V to 48V and ...
TDK-Lambda
Plug-in unit Fixed output voltages Thermal fuse in transformer Exchangeable DC plugs Approvals: - Complies w. medical std EN 60601 (on request)
Mascot
12VDC Output GOLD or SILVER Efficiency Class B Conducted EMI Up to 17.5 Watts/Cubic Inch 1U High SlimLine Package Hot-Swappable PMBus 1.1 Audible Alarm Universal 85 to 264VAC Input Variable Speed Cooling Fans
Unipower
Input voltage: 36 V - 72 V
Output voltage: -12 V - 12 V
Power: 72 W
Features Input Range: 36 ~ 72 VDC Output Voltage: +5V, 10A (0A min) +12V, 1.5A (0A min) -12V, 0.3A (0A min) MTBF(hours): 50,000h Safety: Meets UL1950, CSA C22.2 NO.234, CE Dimensions: 127 x 76.2 x 29mm Compatible with Axiomtek ...
Spellman’s Bertan brand of 230 Series high voltage power supplies provide regulated high voltage outputs from 1 to 30kV. The low noise, linear topology employed results in extremely low output ripple specifications. These 12 to 15 watt ...
Spellman High Voltage Electronics
Input voltage: 90 V - 265 V
Output voltage: 3.3, 5, 12, -12 V
Current: 10 A
This device has a voltage of 90~265 VAC with a Full Range Frequency of 47~63Hz. It has an input current of 10A(RMS)@115VAC, 5A(RMS)@230VAC. The Inrush current on the other hand is 40A max for 115VAC, 80A max for 230VAC.
IEI INTEGRATION
RCMs (residual current monitors) when used in combination with separate residual current transformers allow the monitoring of insulation between active conductors and the earth conductor. In contrast to modular residual current devices ...
Doepke Schaltgeräte GmbH
EPFC3-144 Series Digital Power Factor Controllers - 3 display 4 digit 7 segment LED - 6 and 12 steps avaible - Measurements: . cos φ inductive & capacitive . three phase voltage & current . power: W- VAr- VA (Real - ...
EL.CO.
Input voltage: 18 V
Output voltage: 24 V
Power: 120 W - 400 W
NS SERIES NON STABILIZED POWER SUPPLIES - Degree of protection IP00 - Red input voltage signalling led - Red output voltage signalling led - Operating temperature -5 - +50°C - Extra protection input currents via fuse - Extra ...
EL.CO.
Input voltage: 230 V
Output voltage: 12 V - 24 V
Power: 12 W - 120 W
LINEAR POWER SUPPLIES WITH TRANSFORMER - Drawbar for mounting on din bar (AL-1,5A24TR / AL-1A12-240 / AL-0,5A24-240) - Panel fixing with screws (AL-3A24BTR, ALB-3A24BTR, AL-5A24BTR) - Degree of protection IP00 - Electronic ...
EL.CO.
Miniature lightweight insulation tester. It weighs only 340g(battery included), but carries full measurement functions. Automatic discharge of circuit capacitance. Test leads with remote control switch. New robust housing case. ...
Kyoritsu
– For checking all commonly used batteries (AA / AAA / C / D / E-block / button cell – small) – Easy to read, 3-colour scale to display the battery charge level – Easy to use with sliding battery holder and clearly accessible contacts ...
ACT Meters presents GOLD-PLUS intelligent battery tester. It is suitable for both types of batteries - 6V in the range of 1.2Ah to 12Ah and 12V in the range of 1.2Ah to 100Ah. Within seconds, it simulates a full, 20-hour battery discharge ...
ACT Meters International Ltd
Output voltage: 0 V - 40 V
Current: 0 A - 5 A
Power: 200 W
The FA-405 is a 200W Power Supply that provides a continuous output. It is adjustable from 0 to 40 V and from 0 to 5 A. The power supply has over-voltage, over-current, overpower and over-temperature protections, what provide a safety ...
PROMAX ELECTRONICA
This Battery tester has been designed to estimate the autonomy of a battery for different loads. The role of the batteries is essential for all electrical prospecting surveys with a resistivity-meter and particularly in multi-electrode ...
Iris Instruments
Input voltage: 85 V - 265 V
Output voltage: 50, 250 V
Current: 2, 10 A
Features Constant Power Output for 5 Times Multi-range(V&I) Operation Natural Convection Cooling Design (Fanless Structure) Preset Memory Function Output ON/OFF Delay Function CV, CC Priority Mode Adjustable ...
Instek
Switch mode units for DIN-rail mounting. 18 - 30 - 60 and 120 W Supply voltage: 90-265 VAC Output ranges: 5 DC - 3.5 A , 12 VDC - 1.5 A, 2.5 A or 5 A 24 VDC - 0.75 A, 1.25 A, 2.5 A or 5 A
Comelit produces a vast array of power supplies, AC/AC, AC/DC, DC/DC, linear solutions, switch mode and current generators for LED, encapsulated, housed and open frame. Comelit develops mechanical solutions for housings, fixing methods ...
Input voltage: 90 V - 264 V
Output voltage: 12, 5, 3.3, -12 V
Power: 150 W
Features Flex form factor power supply Full-range input with active PFC Max. 5V output is 13A Low noise
PORTWELL
Input voltage: 400 V - 480 V
Current: 13 A - 270 A
Power: 5,000, 10,000, 120,000, 20,000, 40,000 W
Flexible control voltage The compact power supply modules generate the DC bus voltage and supply the connected compact inverters (KW) with power. Thanks to their wide voltage range, they are suitable for worldwide use. The feed-in ...
Input voltage: 540 V - 650 V
Output voltage: 350 V
Current: 3.8, 7.6, 19 A
The compact inverter D, two in one Compact for small outputs. The double inverter KWD is a KW variant for two servo drives with a maximum output of 5 kVA. It combines two independent compact inverters in a compact housing with cold-plate ...
The intelligent interface between centralized and decentralized drive technology. Simple and scalable The KHY hybrid distributor is the intelligent interface between centralised and decentralised drive technology. It simplifies the ...
Please specify:
Help us improve:
remaining