|
|
Dynetek Industries Ltd. designs and manufactures a lightweight Bulk Transport (BT) System for efficient transport of compressed natural gas (CNG) and other compressed gases. These BT-systems allow cost effective development of gas markets, and an Instant Infrastructure(R) by making CNG immediately accessible to end-users.
The unique storage advantage of the BT-System lies in the use of Dynetek's Dynecell (R) cylinders, a seamless, thin wall aluminum liner covered with a full professional carbon fiber overwrap. The Dynecell professional cylinder is non-permeable and exhibits limited expansion under pressure and temperature changes.
For more information visit www.dynetek.com |
|
BODY
obtained by means of windings it concentrates us more layers than paper kraft and glue with professional adhesive natural, complete non-toxic vegetable of a bush of head in steel galvanized reinforced by means of bordatura to ricciolo and of a bush of bottom in galvanized steel
BOTTOM
in fibrolegno having shim generally from milimeter 5 to milimeter 6,5
COVER
in fibrolegno self-centring to closing total on the external diameter of the having drum and shim generally from milimeter 5 to milimeter 6,5
CLOSING
by means of bush in steel galvanized with sigillabile lever handle
AT CALL
all the drums can be personalized with the brand of the customer by means of INDUSTRIAL SCREEN PRINTING or LABELLING
|
|
Dynetek's proprietary technology powers automobiles, buses and trucks in over 20 countries around the world.
The core technology of Dynetek's Fuel Storage System is the DyneCell(R) professional cylinder, which is made from a seamless, thin wall aluminum liner covered with a full professional carbon fiber overwrap. The composite cylinder is lightweight, non-permeable, has excellent corrosion resistance characteristics and limited expansion under pressure and temperature changes.
The superior strength of the DyneCell cylinder lends to Dynetek's ability to work with vehicle manufacturers to design and produce complete fuel systems that are lightweight and space efficient.
For more information visit www.dynetek.com
|
|
| The TANK-VAC draining appliances enable users to collect industrial fluids with or without filtering them. They extract swarf/chips, sludge and sediments that they separate from the fluid collected, and then release the fluid either directly or following a fine filtration process, so that it can be re-used immediately. |
|
| Tank made in 304 stainless steel specially designed for suction, transfer and subsequent drainage of liquids, either with or without solid particles in suspension. |
|
Storage devices serve a number of purposes on a refrigeration system. On the high side of a system, the receiver will hold additional system refrigerant charge. On the low side of the system, the accumulator will trap excess liquid, keeping it from getting to the suppliers of compressor. The oil separator will remove oil from the discharge vapor and return it to the compressor.
The A-AS protects the compressor from liquid slugging and is used with CFC, HCFC, and HFC refrigerants. It is available for systems through 28 tons nominal capacity. |
|
A compensator tank is a mode dependent receiver that can be used in a heat pump system. As the heating mode does not require as much refrigerant as the cooling mode, the compensator tank stores the excess refrigerant.
|
|
Compressed air professional receivers, operating pressure 11 bar
- Receiver horizontal from 18 to 5000 litres
- Receiver vertical from 270 to 5000 litres
Compressed air receivers, operating pressure 16 bar
- Receiver horizontal from 50 to 5000 litres
- Receiver vertical from 250 to 5000 litres
Compressed air receivers with higher operating pressures
are available upon request.
|
|
The air receiver dimensioning is very important. It depends on the size of your compressed air pipework, on the variation in the air demand and on the capacity of your supplier of compressors. Worthington proposes a complete range :
Painted or galvanised air receivers
Horizontal or vertical air receivers
From 90 to 5000 litres
|
|
Airtanks from 20L up to 4000L.(larger models upon request) These tanks are available in horizontal and vertical execution. The working pressure is 11 bar or 16 bar. Airtanks up to 900L. are in accordance with the CE-normalisation. The airtanks from 1000L. volume up are manufactured under the TÜV Baumuster registration.
The most advanced manufacturing and splicer procedures are being used.
These tanks are being delivered complete with:
Hammertone coating.
Supplier of pressure gauge
Safety release cock
Condensate drain
Air stop ball-valve
These tanks are also available without these features. Airtanks manufactured under other certification are also available upon request, such as Loyd’s certification. The airtanks are also available in galvanised finish.
|
|
Permanent surface resistivity <=1,000,000 Ohm
Each keg is tested after production
Tamper evident
Air and watertight
UN marking for solids
Capacities: 26 and 75 litres |
|
PRONAL flexible tanks are ideal for storing and transporting liquids (drinking water, hydrocarbons, chemical solutions, foodstuffs, industrial waste, sludge... ).
They are manufactured with elastomer or plastomer materials, depending on the application, and reinforced with high strength fabric. This is a simple economical solution.
Flexible tanks are used throughout the world and are suitable for thousands of users.
Advantages:
- lightweight,
- compact when folded,
- quick set up,
- no air inside the tank,
- a low-cost solution, no civil engineering required
A highly diversified range of products :
- ground storage up to 500,000 litres,
- can be transported on trucks, pick-ups, boats and aircraft, suspended under a helicopter or towed behind a vehicle,
- structured tanks and ferry fuel tanks for aeroplanes and helicopters, with anti-crash and self-sealing versions. |
|
THE MATERIAL
Butyl: The polymer butyl (IIR - isobutylene isoprene - rubber) is an elastomer with a small number of double bonds, produced through co-polymerisation of isobutylene and isoprene.
EPDM: The polymer EPDM, ethylene-propylene rubber, is produced through co-polymerisation of ethylene, propylene and diene monomer, producing a polymer made up of saturated linear macromolecules with a paraffinic structure.
In addition to the base polymer, both EPDM and Butyl contain reinforcing carbon black, fillers, process chemicals, antioxidants and vulcanising agents. After mixing the ingredients into a homogenous plastic compound, two layers of the rubber are rolled out in a calender to form a double sheet. Vulcanisation is then carried out. The long rubber molecules in the material are cross-linked through heat and pressure, creating an elastic membrane.
RESISTANT TO THE ENVIRONMENT
The vulcanisation process means that the material differs from all thermoplastic products, in that its properties are not affected by varying temperatures. The product is chemically stable and always returns to its original dimensions after stretching.
The cross-linked molecular structure gives EPDM and Butyl rubber their unique properties. Ageing or changes in characteristics are negligible despite decades of exposure to the atmosphere, sunlight, UV radiation, chemical fallout, water or major temperature fluctuations.
|
|
This storage tank for liquids or powdery products (water reserves, fish-breeding pools, safety sand vat, fertilizer, silo, effluent basin, storage of sludge cake) includes :
- A modular metal frame made out of galvanized steel assembled with bolts suppliers and nuts.
- A tight envelope made out of special polyester imputrescible cloth, coated with 1000 g/m2 PVC and reinforced by 2 welded belts.
The open vat is very light and no compact. It is very easy to clean in case of pollution of water by muds, leaves, sand, etc ... |
|
Features:
- This model is specially designed for fuel storage without using a retention professional tank.
- Inner professional container is manufactured from high density polyethylene.
- Outer protection is made of galvanized sheet iron, which protect totally polyethylene inner container. |
|
Dynetek Industries Ltd. designs and manufactures Advanced Lightweight Fuel Storage Systems(R) for compressed natural gas (CNG), compressed hydrogen and technical gases.
The core technology of the system is the DyneCell(R) composite professional cylinder made from a seamless, thin wall aluminum liner covered with a full carbon fibre overwrap. DyneCell cylinders are extremely lightweight and are used in various applications around the world.
For more information visit www.dynetek.com |
|
To fill the tank with your machines or vehicles, do not waste any more time, choose a practical, reliable and autonomous delivery system.
Capacities: 1000,1500 and 2000 liters.
Other galvanized steel mobile versions, 400,600 and 980 liters.
|
|
- For more than 35 years LINPAC Allibert Buckhorn has been manufacturing high quality plastic manufacturers of storage tanks using our unique process : Helix winding.
- Tanks wound by LINPAC Allibert already store more than 400 million litres of corrosive liquids. All industries, all types of chemicals, any conditions, standard or bespoke designs. |
|
Suitable for food use). Orifice of filling DN 225 with lid(snack) in coil, if it is wished, also DN 400. Plumbing fixtures of bulging integrated Cock of butterfly NW 50.
MEASUREMENTS:
Height: 950 mm.
Base: 1000 x 1200 mm.
Capacity: 800 Liters.
ENDED IN:
Metallic structure in Galvanized electrolytic.Palet of (Plastic) polyethylene. |
|
FEATURES
With the RYD-1000 bottle conception an optimum draining is achieved.
The RYD-1000 design make the best use of the available storage and transportation space.
All RYD-1000 components are easily replaceable.
ISO containering:
20' professional container = 18 units.
40' container = 40 units.
470x530mm. and 290x530 mm. identification plates.
It has four protections on the lower corners, manufactured with polyethylene, to protect the inner container to avoid damages during manipulation.
UN approved for the transportation of dangerous goods according to ADR, RID and IMO regulations. |
|
Range supplements from 100 to 3300 liters, on industrial casters, feet, sleeves, with lid.
Containers out of polyester very solid and light, easy of maintenance thanks to the smooth walls and to the corners rounded, being able to contain foodstuffs like many chemicals. |
|
|
|