|
|
Diamond and cubic boron nitride (CBN) are considered to be the hardest known grinding materials and are therefore often referred to as "super-abrasives". For this reason they are suitable for machining materials which are difficult or even impossible to grind with conventional abrasives such as silicon carbide or corundum.
Diamond and CBN have the same crystal structure, with diamond consisting of pure carbon, whilst CBN is made up of the elements boron and nitrogen. |
|
Sunnen Diamond Plated Honing Tools are available for precision bore finishing in industrial applications using Sunnen, Nagel, Belden, AccuCut, Engis, and other types of high-production honing equipment - virtually any type of equipment.
Sunnen offers plated diamond honing tools and sleeves designed for your high production honing application. Backed by more than 25 years of single pass honing technology, these tools incorporate an expandable, superabrasive sleeve mounted on a tapered mandrel for precision bore sizing and finishing.
The plated sleeves, mandrels and pilots of Sunnen Single Stroke Honing® Tools are designed for maximum accuracy and fast cycle times.
Sunnen Plated Superabrasive
The Single Stroke Honing® process is a fast and accurate method of sizing certain bores to final size. The Sunnen Single Stroke Honing® Tool used is an expandable, superabrasive sleeve mounted on a tapered arbor. The sleeve is expanded only during setup, and no adjustments are necessary during the honing operation. The rotating Single Stroke Honing Tool is pushed through the bore only once, with the workpiece being removed after the return stroke.
It should be pointed out that the Single Stroke Honing® process is limited with respect to the types and volumes of material that can be removed. The size and volume of chips removed must be no more than there is clearance for between the diamond grits on the sleeve. Therefore, the Single Stroke Honing process is best suited for honing operations that produce a relatively low volume of chips, such as interrupted or short bores, and is most successful in honing cast iron and powered metals. |
|
Honing is employed to improve surface finish, size, and surface geometry. In most GMPTD applications, the tool makes a light cut with a fine grained abrasive (240-600 grain size) and conforms to the workpiece geometry. The most common application is on internal cylindrical surfaces, but it also may be used elsewhere such as on flat surfaces. The abrasive grains are bonded to form stones which are typically both rotated and reciprocated in contact with the work surface. In face honing both the part and tool rotate about parallel but not coaxial centerlines.
Each abrasive grain in contact with the workpiece removes a small chip and the grains are continuously broken down by the process to expose new, sharp grains. In this manner, honing stones are self-sharpening. Great care should be exercised in selecting rotary speed, stone pressure, bond hardness, and coolant to assure correct stone breakdown, avoiding glazing and produce the desired surface finish. |
|
Dressing Sticks for PCD, CBN, Resin, and Metal Bond Diamond Wheels :
BORIDE Engineered Abrasives produces a wide array of dressing sticks for PCD, CBN, resin, and metal bond diamond wheels. We use only premium aluminum oxide and silicon carbide materials to produce consistent quality products you expect from BORIDE Engineered Abrasives. |
|
The perfect solution for removing the edge layer of metallised thermo-glass.
With TYROLIT Elastic, it is possible to remove the mteal layer at the edges cleanly without damaging the glass. The operator is able to see the task clearly with no sand grains and chips. The built-in damping effect removes metal and protects the glass.
TYROLIT Elastic can be used on stationary and portable machines.
For economic trimming of metallised thermoglass, ask for TYROLIT Elastic. |
|
HIGH PERFORMANCE CUTTING WITH ANGLE GRINDERS AND CIRCULAR SAWS
These new extra thin cut-off wheels have set a new industry wide performance benchmark. They cut faster, freer and cooler requiring less power than any other thin cut-off wheel. They are reinforced for extra safety but are very flexible and resilient to resist twisting and bending and will give a true and straight cut every time.
UsED Daily by: Metal fabricators, maintenance departments, sheet metal shops, welding shops, mechanical contractors, food equipment manufacturers, automotive shops, pulp and paper mills and many others. |
|
Cutting-off Wheels and Rough Grinding Wheels
Type T41
Type T42
Type T27
Type T29
Cutting-off Wheels RAPOFLEX Super + Extra
Cutting-off Wheels RAPOFLEX Super Light
Cutting-off Wheels RAPOFLEX Extra Light
Rough Grinding Wheels RAPOFLEX Super Extra
Cutting-off Wheels for Foundry Industry
Cutting-off Wheels for Cutting Stones
Cutting-off Wheels for Deburring
Sharpening and Cutting-off with Non-reinforced Wheels
Cutting-off Wheels 300 - 350 for Offhand Grinding
Cutting-off Wheels 250 - 500 for Stationary Machines
Large Cut-off Wheels 600 - 2000 mm
Large Cut-off Wheels for Warm- and Hot-cutting
Ronden
|
|
Continuous innovation and the development of specialized products for all application areas enables KLINGSPOR to offer a range of products to satisfy every need.
- Kronenflex grinding discs and cutting-off wheels are available in three quality classes
- EXTRA: Ideal price/performance ratio for universal applications
- SUPRA: Professional products with a long service life and high cutting rate
- SPECIAL: High-performance products for special applications in industry and trade |
|
| VSM sanding and grinding discs made from flexible abrasives are made in various diameters and with different backings, thus offering users a large range from which to select the best tool for their purposes. VSM fibre discs are the optimum answer for maximum cutting rates using angle grinders. To attach cloth and paper backed discs to the backing pad they have either self-adhesive or hook and loop fastening. |
|
Diamond and CBN wheels in resin bonded adapted for grinding, sharpening, creep feed grinding of tools.
diamond and CBN resin bonded grinding wheel
PCD and CBN cutting tool
diamond high precision tool
Grinding wheel |
|
We manufacture grinding tools for:
OD grinding
Profile grinding
ID grinding
Deep feed grinding
Centerless grinding
Surface grinding
Crankshaft grinding
Camshaft grinding
Our main customers:
Automotive industry
Bearing industry
General engineering
Steel industry
ABRASIVE BOND SYSTEM DIMENSIONS
ALUMINIUM OXIDE VITRIFIED, RESIN 8 - 1100 mm
SILICON CARBIDE VITRIFIED, RESIN 8 - 750 mm
CBN VITRIFIED, RESIN, METAL 5 - 600 mm
DIAMOND VITRIFIED, RESIN, METAL 5 - 600 mm |
|
| The price-performance ratio with is unrivalled in the industry gives the Classic Line a head-start. Customer-friendly labelling as well as color coding of the application and material allow for easy recognition and facilitate use. Optimum protection through high quality packaging rounds off the standard.. |
|
STARTEC is a TYROLIT product-line with a patented bond system, standard resin systems, improved grain and innovative grinding wheel design.
With STARTEC you will reduce costs through longer wheel life, shorter cycle time, higher process safety levels and better quality of your tools.
To achieve these goals the trend is towards CNC grinding machines. The advantages of these machines can only be used together with highest quality grinding tools.
TYROLIT has developed two new product lines, STARTEC-Basic and STARTEC-Ultra, for this very complex and customer specific area. These new products are for grinding HSS and cemented carbide tools. |
|
TYROLIT has developed grinding wheels for the economic production of high-quality cutting edges. These provide the required cutting edge quality with high stock removal rates, wheel life and are easy to dress.
Not only the choice of the specification also the trueing and dressing are important influential factors which are sometimes underrated.
Trueing, which is usually done with vitrified SiC wheels, produces the geometry and flatness of the grinding wheel faces.
Afterwards, dressing with a vitrified aluminium oxide dressing stick is necessary to expose the diamond grit. |
|
| The Flex-Hone® Tool is a resilient, flexible honing tool with a soft cutting action. Whether your need is cross hole deburring, surface finishing or edge blending there is a Flex-Hone® Tool designed for you. In Automotive, Hydraulic, Pneumatic or Industrial applications, the Flex-Hone® Tool will provide a superior surface finish bringing increased product performance, a non-directional or crosshatched patterned finish for oil retention, longer product life and less product reject. Available in sizes from 4mm- 36”, in 8 different abrasive types and 11 different grits. |
|
Diamond and CBN wheels in resin bonded adapted for grinding, sharpening, creep feed grinding of tools.
diamond and CBN resin bonded grinding wheel
PCD and CBN cutting tool
diamond high precision tool
Grinding wheel
flexible bonded abrasive
Polishing Diamond pad
CBN grinding wheel
Honing diamond and CBN tools |
|
KADIA honing tools and abrasives provide maximum processing precision and high tool life - as the most economical means of ensuring perfect bore geometry. Our comprehensive tool range includes top-class solutions for all honing applications and for honing machines of different designs and makes.
Our honing tools can optionally be equipped with metal-bonded diamond or CBN (cubic boron nitride) superabrasives or with electroplated cutting grains. The tools are hardened and individually precision-ground for the specific bore to be machined. Each application requires its own solution, which we are also glad to develop in response to your concrete requirements.
|
|
Sunnen Products Company has the tooling and abrasives you need for your low, mid and high production applications - whether you use Sunnen equipment or non-Sunnen equipment.
Sunnen's complete line of honing abrasives sets the standard in the industry. From aluminum oxide and silicon carbide to diamond and CBN, Sunnen offers the industry's largest variety of abrasive materials, bond types, grain sizes and stone configurations. You get exactly what you need when you need it. |
|
Based on more than 80 years experience honing tools are manufactured in our plants. We produce different tools for the honing of bores in the diameter range of 1-2000 mm and for bore lengths up to 24000 mm.
Gehring honing tools are hardened and all important operating components have been precision ground.
Their precision and operating life are |
|
| Selected aluminium oxides are embedded in a special vitrified bond. These honing rings, especially developed for High Performance Gear Honing process, allow a stock removal rate up to 0.09 mm per flank. |
|
With Columbia TYROLIT raises the curtain on a new generation of race and bore wheels.
Columbia by TYROLIT closes the technological gap between conventional grinding wheels and superabrasives. |
|
Optimum results and easy application: With the Secur® LAB program of laboratory cut-off wheels we offer the optimum cut-off wheel for a diversity of materials, workpiece dimensions and hardness.
Cut-off wheel selection: Various wheel specifications can be applied depending on the type - hardness and ductility - and the dimensions of the materials to be cut-off. The difference in wheel hardness is indicated by the new and unique color-coding by TYROLIT. Ceramics and tungsten carbide alloys are cut-off with diamond tools. |
|
The assortment includes specifications for steel and cast iron machining (especially for large surface grinding) for heavy workpieces, for grinding of welding seams) as well as for stone and first step grinding on artificial stone and terrazzo tiles, surface grinding on marble, slate stone and granite).
Furthermore the cup wheels are produced and checked according to European safety standards (CEN, EN 12413) and designed especially for rough working conditions. For clamping there are bore hole H=22,2 and M14 available. |
|
Diamond and CBN wheels in resin bonded adapted for grinding, sharpening, creep feed grinding of tools.
diamond and CBN resin bonded grinding wheel
PCD and CBN cutting tool
diamond high precision tool
Grinding wheel
flexible bonded abrasive
Polishing Diamond pad
CBN grinding wheel
Honing diamond and CBN tools
Diamond powder
Synthetic diamond powder
Natural diamond powder
diamond and CBN saw blade
diamond and CBN abrasive disc
diamond dressing tool
abrasive disc for boat industry
laboratory cut-off wheel
diamond disc
CBN vitrified grinding wheel
diamond and CBN vitrified bonded grinding wheel
diamond and CBN metal bonded grinding wheel |
|
In foundries and in the building of forms the use of Schleifstiften can be attained often the only possibility around with difficulty accessible places at the workpieces to obtain and an improvement of the surface at the same time.
|
|
TYROLIT has always been a leader in the supply of rollers for the calibrating of granite and agglomerate slabs both for mobile bridge and fixed transversal roller machines.
Today TYROLIT holds the record also for the tools (180mm and 320mm diameter) of the new generation calibrating machine with rotating heads.
The constant technological forefront of the tool: this has always been TYROLIT's commitment to its customers, whatever the processing, technique or machine may be. |
|
Diamond and CBN wheels in resin bonded adapted for grinding, sharpening, creep feed grinding of tools.
diamond and CBN resin bonded grinding wheel |
|
|
|
Bonded abrasives, Grinding wheels
