|
|
These automated machines are used for small, series-produced components.
Workpieces are generally processed on an indexing professional turntable. Lifting doors prevent the escape of abrasive and dust.
Additional strip brushes are fitted when continuous blasting is required.
Rotational speed of satellites as well as vertical and horizontal movements of suppliers of nozzles are fully adjustable.
The turntable may be indexed in steps with 1, 2 or 4 pieces ea.
In the basic version automated turntable machines comprise a single blasting station.
The workpiece is loaded manually and processed by one or several nozzles.
Automated pass-through machines offer the same workpiece and nozzle manipulation options as automated turntable machines.
A industrial conveyor belt transports workpieces.
|
|
Integrated Systems combine and interface a Cold Jet Pelletizer with one or more Cold Jet blasting systems and provide for continuous, uninterrupted, completely automated operations. Each Cold Jet Integrated System is custom engineered to meet specific customer requirements.
Features:
- Ability to run multiple industrial nozzle stations
- Fully automated - no interruption of work to fill machine with dry ice pellets
- Works with professional robots or manual blasting
- Ideal for integration with a production line
- Operating pressure up to 300 psi (20.7 bar) |
|
Sandblasting cabinets are operated from the exterior. During blasting, spent blast media is recovered by an efficient reclaiming system and recycled. Dust, fine particles and debris are carefully separated from reusable blast media.
Blast Professional cabinets are available in various sizes with internal working dimensions from 920 mm
to 1500 mm.
The viewing window is slightly angled for operator convenience.
Blasting is initiated and stopped by means of a foot-operated cock.
|
|
Walk-in blast rooms can accommodate big and extra-big components.
The waffle-floor system requires no mechanical recovery systems such as screw conveyors, bucket elevators etc. which are subject to high wear.
Contrary to conventional blast rooms our waffle-floor blast rooms require no pits or foundations.
Existing rooms can easily be retrofitted with the waffle-floor systems.
Using the air flow from the duster the spent abrasive is collected in the waffle floor having a thickness of 220 to 260 mm only, and picked up from there.
The whole base area serves for recovering; air inlet baffles are distributed over the room ceiling.
Due to the vertical downdraught ventilation produced inside the enclosure the dust is immediately trapped. This principle guarantees excellent visibility which is unknown with conventional systems and greatly increases productivity. |
|
The range of the Matravac type constitutes processing machines by impact mobiles and work in closed circuit.
Projection and instantaneous recovery are carried out directly on the level of the professional gun without fear of projection of dust.
According to the shape of the part to be treated, one will adapt an adequate type of brush (professional brushes cylindrical hairs short or long, angle brushes...)
Do not bring any more the part to shot-blasting... Amenez shot-blasting at piece-rates! |
|
These units feature a unique closed-circuit system, i.e. immediately after the blast media has been thrown onto the workpiece it is recovered and recycled. This ensures a consistent quality of the abrasive and minimises consumption.
You are free to blast anywhere in open or closed environments, without interfering with other activities nearby - with no pollution.
Closed-circuit machines have been designed for heavy-duty industrial applications.
They are available with air ejector or vacuum pump (side-channel exhauster) to generate the recovery air flow.
Problast closed-circuit systems are suitable for cylindrical workpieces and flat surfaces. A typical application is the surface treatment of rollers.
But there are numerous other workpieces and applications for which the closed-circuit system represents an ideal solution, for instance the cleaning of welds. This makes pickling as well as grinding and polishing of the surfaces superfluous.
|
|
This innovative lightweight, compact, single-hose low pressure, electric blasting system utilizes dry ice block with as little as 12 cfm and blasts at variable air pressures from 20 to 125 psi (1.4 to 8.6 bar).
Features:
- Uses as little as 12 cfm of air at blast pressures up to 125 psi (8.6 bar)
- Uses as little as 0.2 pounds of dry ice per minute which provides as much as 45 minutes of blasting before reloading
- Single-hose, patented professional feeder design for maximum blasting aggression
- Standard size block is 5" x 5" x 12" (12.7 cm x 12.7 cm x 30 cm), 6" x 6" x 12" (15 cm x 15 cm x 30 cm) configuration available when requested. (
- Adjustable blast pressure allows for flexibility in order to optimize performance
- Adjustable ice rate enables better performance
- Internal blast industrial air filter (20 Micron) minimizes the effects of contaminated air
- Extruded Aluminum frame |
|
| Suitable for shotblasting of passing flat or single cross-section pieces without any limits of length. The pieces are treated on the upper part at 180°. |
|
| Particularly suited to be incorporated in complementary machining lines and in general for automatic sequence shotblasting of small and medium articles loaded in bulk with a unit weight of not more than 5 kg. |
|
For blasting different workpieces.
Equipped with pistol movement, number of atomizers.
Been suitable for pipes, plates, disks, etc.. |
|
DOWNDRAFT SANDING TABLES
- Eliminate airborne dust and contaminants while sanding.
- Ideal for use with non-vacuum, central-vacuum, orvacuum ready tools equipped with non-vacuum pads.
- Dual filtration - accepts 1-micron pleated paper industrial filters and one 5-micron pre-filter blanket
- Rhino Linings® coated tabletop surface is durable and anti-slip.
- Electric capacity: 230V/50 Hz single phase.
|
|
Optimum protection thanks to a smart design: Euromate downdraft table
Innovative professional workbench
The downdraft table is a workbench and an extraction/filtration system in one. The table removes dust and fumes from the breathing zone of the welder manufacturers by drawing these through the work surface and filtering them from the air inside the workbench.
With the Euromate downdraft table your workplace will always have a powerful extraction and filtration system. The downdraft table can be placed anywhere, even inside a welding booth.
A breakthrough in extraction
Powerful extraction, maximum professional filter surface area, efficient cleaning, maintenance performed from the front, three-way spark arrester and simple control
|
|
Downdraft table - DraftMax
- Powerful extraction of splicer smoke and grinding dust
- Three-way spark arrester enabling optimal safety
- Professional filter area of 52 m2
- All maintenance performed from the front
- Efficient automatic self-cleaning
- Available in four different models, geared to your specific situation.
The DraftMax tables are setting new standards for downdraft tables by offering a three-stage pre-filtration for optimal spark arrest, a maximal filter surface of 52 m2 within the available space and an extreme service-friendliness. All service and maintenance can be done from the front side. DraftMax has a very powerful extraction and the noise produced by the unit is extremely low. All features make the new PlymoVent downdraft table, DraftMax, a reliable and safe solution with a low cost of ownership.
|
|
| An independent suction table to improve working conditions, with electronic control panel and collection at source for portable tools. |
|
| Micro Air Downdraft tables offer you the flexibility to configure a work table to exactly meet your needs, space and worker preference. Downdraft tables provide your clean air solution in a variety of applications including grinding, plasma/torch cutting, sanding, brazing smoke, deburring, or fumes. |
|
This Automated Cleaning Booth has been designed for dry ice cleaning applications that require repetitive spraying on similar sized parts, hour after hour, all week long. This booth is a quiet, sound-proof enclosure with advanced micro-particle filtration and effluent capture system to collect or reclaim the contaminant being removed.
Features:
- External noise below 80 dBA
- Fully integrated safety circuits and E-stops
- Double-glazed viewing window plus professional cabinet workspace lighting
- Positive pressure cabinet design
- Can be used with pneumatics or nitrogen as blast propellant
- Atomizer path motion accomplished with off-the-shelf, easy to program and use, multiple axis industrial professional robot mounted inside the cabinet
- Cabinet can be constructed with slide-out trays, or a variety of parts loading and parts fixture devices depending on the application
- Uses any of Cold Jet's single-hose blasting systems, or can be part of a Cold Jet integrated system with Pelletizer, blasting unit, and the cabinet combined
- Custom designed air handling and filtration
- Glove-box version available for manual blasting
- Cold Jet's single-hose blasting unit can be detached for use elsewhere in your plant when the cabinet is not in service |
|
The CAB series is designed to operate as a dual professional hose system. This unique CRYONOMIC® concept results in:
low dry ice consumption
continuous performance
the ability to clean up to 100 metres away from blasting unit.
All CRYONOMIC® CAB units can also work with a single hose system and minigun! This is particularly useful for cleaning jobs with poor accessibility.
The CAB blasters are the only units available with features increasing the overall cleaning efficiency:
professional gun light
remote control
air volume control on the gun.
CAB series is available in 3 models:
CAB 51: variable blast pressure
CAB 52: variable pressure and ice consumption
CAB 53: remote control on gun.
|
|
Cold Jet dry ice blasting systems provide a superior clean. Period.
We provide solutions for any budget with the widest selection of blast machines and manufacturers of nozzles available anywhere in the world today. Whatever you need to clean, we can help you find the right solution for your application. |
|
Dry, robust sand blast cleaning room and compacts, with standard projection "overpressure", with dust extractor with integrated cartouche.
It offers a total volume thanks to its frontal opening opening on a scheme of work or in option on a revolving plate.
Useful volume: 1300 X 750 X 850 mm
It is the best report/ratio ecombrement total/useful volume of the market. |
|
|
|
Sand-blasting, Shot-blasting and stripping equipment and tooling
