assembly line
assembly line
FMS

FMS is a flexible assembly system with workpiece carriers, which are transported on accumulating roller chains, special belts or chains. Standardised modules for exact positioning, lifting or rotating enable very quick implementation ...

automatic assembly machine / for automotive applications / rotating table
automatic assembly machine
MOD. 315/ROT

Pneumatic machine with rotating table for laying rivets or pins, measures to be agreed on. All functions controlled by PLC, cycle time adjustable an unloading of the pieces in automatic.

See the other products
MUPI2000
automatic assembly machine / rotating table
automatic assembly machine
MOD. 315/Rot

Machine for the laying of a rivet (Ø 8mm length 40mm) designed for assembly of a castor wheel with automatic feeding of a part of the wheel.

See the other products
MUPI2000
automatic screwing machine
automatic screwing machine
MOD. AVV. Rot.

Quick Overview Automatic screwing machine of screws and nuts (dimensions to be determined) with a rotating table and extratcion of the finished part in automatic.

See the other products
MUPI2000
programmable screwing unit
programmable screwing unit

Screwdriver with n°6 tightening programs assisted by anthropomorphic. Tre screwdriver group is 220mm long to be able to enter the piece in hotizontal.

See the other products
MUPI2000
automatic assembly machine / plate / custom
automatic assembly machine

Assemblage point of plates in automatic equipped with two presses by using belts of accumulation, pick and place, welding unit, bending unit and rotating tables with containers for unloading of pieces with accumulation.

See the other products
MUPI2000
pneumatic press / assembly / C-frame
pneumatic press
LP series

Pressing force: 4 kN - 14 kN

The LDP pneumatic presses are certified as per the Directive 2006/42/EC. The device is designed to include a swan neck steel structure. It is made using machine tools entirely and then a pneumatic cylinder is assembled on it to be used ...

pneumatic press / manual / assembly
pneumatic press
C series

Pressing force: 2 kN

LDP's C Series of Pneumatic Presses is designed and manufactured to comply with international Directive 2006/42/EC standards. As standard operating systems, all models of the C Series pneumatically actuated. Models of the series are ...

manual press / assembly
manual press

clinching machine
clinching machine

The Clinching Machine, manufactured by LDP Italia srl, incorporates a clinching technology which permits joining of two or more metal sheets of varying thickness via cold plastic deformation. The joining process may be galvanized or painted. This ...

automatic clinching machine
automatic clinching machine

Clinching is an innovative manufacturing process, aimed at the junction of sheet metal through a cold plastic deformation. This manifacturing process provides more considerable advantages than traditional technologies used to date ...

screw feeding unit
screw feeding unit
A-50ARBT-0

Robotic Screw Presenters For automated fastening systems or manual systems using vacuum assist to pick up non-ferrous fasteners.

screw feeding unit
screw feeding unit
Acra-Feed A-2100

Features and benefits Delivers fastener directly to the driver. For #2 - #10 fasteners, up to 1 inch long. Available for captive washer type screws (A-315V). Feed speed of up to 1 screw per second. System includes ...

hydraulic press / joining
hydraulic press
63 - 5 000 kN | HZ

Pressing force: 63 kN - 5000 kN

In regards to press technologies, DUNKES hydraulic assembly presses are configured to meet the various needs of our customers. The various technologies are configured based on the actual task and the cost budget. This may involve fabrication ...

hydraulic press / joining
hydraulic press
25 - 100 kN | HZT/HFT-STS

Pressing force: 25 kN - 100 kN

In regards to press technologies, DUNKES hydraulic assembly presses are configured to meet the various needs of our customers. The various technologies are configured based on the actual task and the cost budget. This may involve fabrication ...

hydraulic press / joining
hydraulic press
160 - 5 000 kN | HF-STS

Pressing force: 160 kN - 5000 kN

In regards to press technologies, DUNKES hydraulic assembly presses are configured to meet the various needs of our customers. The various technologies are configured based on the actual task and the cost budget. This may involve fabrication ...

hydraulic press / joining
hydraulic press
160 - 10 000 kN | HD/HD-HF

Pressing force: 160 kN - 5000 kN

In regards to press technologies, DUNKES hydraulic assembly presses are configured to meet the various needs of our customers. The various technologies are configured based on the actual task and the cost budget. This may involve fabrication ...

hydraulic press / joining
hydraulic press
25 - 250 kN | HZVT

Pressing force: 25 kN - 250 kN

In regards to press technologies, DUNKES hydraulic assembly presses are configured to meet the various needs of our customers. The various technologies are configured based on the actual task and the cost budget. This may involve fabrication ...

automatic assembly machine / for industrial applications
automatic assembly machine
250 - 1 000 mm | DBAS

The AddisonMckee "Eagle" Brand DBAS machine is a double ended horizontal baffle stuffing machine which is be ideal for inserting single baffles or complete baffle assemblies into a pre-formed muffler shell. Both its heads are hydraulically ...

automatic assembly machine / for industrial applications
automatic assembly machine
230 - 1 000 mm | GMS-VBAS

The AddisonMckee "Eagle" Brand GMS-VBAS is a compact all-electric vertical double-ended baffle stuffing machine. The machine is fully programmable with part recall for shell length, loading positions and stuffing position. The machine ...

automatic screwing unit / automatic feed
automatic screwing unit
SEL series

with automatic screw feeding well suited for many applications! For automatic assembly Series production Recordable quality Applications Manual work stations Transfer lines Rotary table machines Suitable ...

See the other products
Stöger Automation
automatic screwing unit / automatic feed
automatic screwing unit
FSF series

Compact construction also enabling use where access is difficult Suitable for operation with robots Control and documentation of the complete fitting process Free programming of relevant parameters - depth, ...

See the other products
Stöger Automation
screwing unit
screwing unit
GAP

Sources of errors in screwdriving processes Fin on the thread of the screw or workpiece Dimension or manufacturing tolerances of threads Tolerances in workpiece height Different thread friction Self-tapping screws ...

See the other products
Stöger Automation
nut screwing unit
nut screwing unit
SEM series

with automatic feeding, developed for serial production (automated assembly) For automatic assembly High production rate Proven quality Available in two versions, with or without automatic-feeding: Version 1: Controlled ...

See the other products
Stöger Automation
stationary screwing unit / with automatic feed
stationary screwing unit

Conceived for manual assembly points and integration in automated assembly lines Details Integrated STÖGER Screwdriversystem Work area 300 x 300 mm (300 model) or 500 x 500 mm (500 model) 3 axes with free, ...

See the other products
Stöger Automation
semi-automatic assembly line / handling / pallet
semi-automatic assembly line
SmartRobComau

Integration: Serial and parallel process. Scalability: Align capital investment to market demand. Fast retooling: Easy tool change for production flexibility. Up to 50% reduction in floor space needed. Ergonomics: ...

See the other products
COMAU S.p.A. - Powertrain Systems
automatic assembly machine / for industrial applications / flexible
automatic assembly machine
SmartCellComau

The Smart Cell Comau is a parallel assembly hub that is perfectly suited for low to moderate volume automated assembly of parts that need stringent tolerances. Its value propositions include dependability that is proved in manufacturing ...

See the other products
COMAU S.p.A. - Powertrain Systems
hose crimping machine / automatic / hydraulic
hose crimping machine
GC32TSi™

Diameter: 0.25 in - 2.5 in

The GC32TSi™ Crimper serves as a solution for meeting all the requirements in producing single hose assemblies. It comes with a conversion calculator, a user's manual, a service log, eCrimp™ data and its diagnostic videos and documents. It ...

See the other products
GATES
pipe crimping machine / hose / automatic / hydraulic
pipe crimping machine
GC96®

Diameter: 0.25 in - 6 in

The GC96 Crimper provides almost all-around capabilities with its optional spacer dies and GC32-XD® dies. This lets the assemblies of industrial hoses to be constructed along with the different kinds of finishing through crimpable ferrules ...

See the other products
GATES
pipe crimping machine / semi-automatic
pipe crimping machine

Crimping force: 7500 N

As the (typical large) products that are made by Hot Crimping typical have a very high intrinsic value, and even higher service/repair costs, you can only afford to use the best possible production equipment for this. A high-force weld ...

filament yarn assembly machine / for glass fiber yarn
filament yarn assembly machine
AMR-F

Assembling machine for filament yarns (F)

filament yarn assembly machine / for glass fiber yarn
filament yarn assembly machine
AMR-G

Assembling machine for glass fiber yarns (G)

hose crimping machine / manual / lever-operated / portable
hose crimping machine
P16HP

Crimping force: 955000 N
Diameter: 10 mm - 45 mm

The P16HP is made for the reconstruction of any damages in the working field. This crimping machine is convenient and has simple configuration that enables quality performance. It has a width of 15.7, length 13.1 and weight of 26 kg that ...

See the other products
Lillbacka Powerco
hose crimping machine / manual / pneumatic / portable
hose crimping machine
P16AP

Crimping force: 955000 N
Diameter: 10 mm - 45 mm

Portable - crimping machines from Finn power are manufactured to be used for field service when there is need to do repairs on-site. They are designed in a simple and straight forward manner. They can be operated easily and are highly ...

See the other products
Lillbacka Powerco
pedal-operated screwing machine
pedal-operated screwing machine
ADS 259/00

Description For processing a profile bar Manual transportation of the profile bar The screw driving process is controlled by a foot switch Manual screw feed Automatic depth shutoff independent of the height of the workpiece

See the other products
elumatec
aluminum profile corner crimping machine / semi-automatic / pneumatic / foot-operated
aluminum profile corner crimping machine
EP 120

Crimping force: 40 kN

Description For pressing profiles with a height of up to 68 mm Extremely high pressing force due to large-volume bellows cylinder (maintenance free) The machine is easy to adjust and operate Counter bearing can be ...

See the other products
elumatec
hose crimping machine / semi-automatic / electro-hydraulic
hose crimping machine
HM 200 series

Crimping force: 1300 kN
Diameter: 70 mm

The small workshop crimper for the service division which is available as an ecoline or DC variant. With a crimp force of 1300 kN / 130 t and a crimp range of up to 70 mm, hydraulic hose assemblies up to 1 ¼” and industrial hose assemblies ...

See the other products
UNIFLEX
hose crimping machine / automatic / electro-hydraulic
hose crimping machine
UA 4

Crimping force: 1350 kN
Diameter: 57 mm

The powerful workshop crimper UA4 with its capability to crimp a wide range of hoses, up to 1¼" SAE R15 or 4 SH (even two piece versions) offers maximum flexibility at a great value. NEW!Stopper + Hose Guide

See the other products
UNIFLEX
composite insulator crimping machine / automatic / electro-hydraulic / with crimping quality control (CQM)
composite insulator crimping machine

Crimping force: 3200 kN
Diameter: 180 mm

Name of machine: Crimping machine Application: Crimping machine is used to crimp the metal fittings of high voltage insulators during insulator production process. With high pressure from hydraulic power force, crimping machine ...

composite insulator crimping machine / automatic / electro-hydraulic
composite insulator crimping machine

Crimping force: 0 kN - 2000 kN
Diameter: 450 mm

Name of machine: Crimping machine of composite insulator Type of Machine: - Production machine Insulator applicable (by material): - Composite insulator (also known as polymer insulator) Insulator applicable for crimping (by ...

automatic assembly machine / syringe / for industrial applications / O-ring
automatic assembly machine

ICM France designs and manufactures customer-specific assembly and testing machines, fully automated, semi-automatic or as a manual workstation. Our machines and systems are tailored to the customer specifications while being technically ...

See the other products
ICM
automatic assembly machine / for industrial applications / rotating table
automatic assembly machine

The basis of our indexed assembly machine is a mechanical rotary table (dial) with ICM France patented pick & place units, which allow a simplified transmission. In order to meet your needs, our solutions are composed of 2 to 32 workstations, ...

See the other products
ICM
pipe crimping machine / automatic
pipe crimping machine

Dimensions - Floor area : 920 x 700 mm - Height : 1'350 mm

See the other products
HUMARD Automation SA
CNC assembling machine / for industrial applications / multi-function
CNC assembling machine

Made the jeweling and the garnish of watch plates, our automatic machines are going to answer all your waits of precision as well as repeatability. Our automatic cells are equipped with a Bulk Feading systems for components which is insensitive ...

See the other products
HUMARD Automation SA
automatic screwing unit
automatic screwing unit
B1ML

SCREWDRIVERS The B1-ML model is a fixed traverse and screwing unit with a built-in screw feed device designed for working on plastic and metal or for fastening reinforcements onto hardware profiles. The B1-ML model is made up of a traverse ...

automatic screwing unit
automatic screwing unit
B1ML-KIT

AUTOMATIC DRIVE SCREWDRIVER UNIT FOR REINFORCEMENTS B1-ML/KIT is a small work center for the fastening of reinforcements on profiles through self drilling screws and for the boring of some holes on request. It is equipped with a roller ...

hydraulic press / joining / for wooden panels / for production
hydraulic press

By means of Marzola, our company specialized in manufacturing presses, Biele offers multidaylight presses for the production of 3 layered panels. The loading and unloading cages, will progressively be full / emptied of transport plates ...

See the other products
BieleGroup
hydraulic press / joining / hot / cold
hydraulic press

By means of Marzola, our company specialized in manufacturing presses, Biele offers multidaylight throughfeed hot presses for the bonding with inexpensive glues, as i.e.: PVAC, UF, EPI. and throughfeed cold presses for the bonding with ...

See the other products
BieleGroup
automated assembly line / handling / for ring binders
automated assembly line
LAK

Main features and benefits: Several layout alternatives according to production requirements as well as customized line Available with curved glass washing machine Possibility to turn key deliveries with clean room and strorage facilities