AC motors
Power: 9.2 kW
... gearbox and electric motor, our product range includes standard three-phase motors and single-phase motors as well as brake motors, ATEX motors ...
Rehfuss Drive Solutions GmbH
Power: 6.6, 6.3 W
Torque: 0.027 Nm - 0.062 Nm
Rotational speed: 0.75 rpm - 1,200 rpm
ASTRO's Explosion-proof motors have frequency of 50 or 60 Hz.The Gas Model is manufactured as per II 2 G Ex ec II T4 and the Dust model as per II 2 D Ex tD c A21 P65 T 90° C.For 3 D (dust) and 3 G (gas) ...
ASTRO Motorengesellschaft
Power: 8.5, 7.5, 5.3 W
Torque: 0.029 Nm - 0.098 Nm
Rotational speed: 1,800, 1,500 rpm
The ASM 24 Series is a unit manufactured by Astro company. It is a motor unit with a speed of 1000 and 1500 rpm by 50 Hz. The ball bearing of the unit conforms through the protection class of IP 40-65. The maintenance ...
ASTRO Motorengesellschaft
Power: 5.2, 6.2, 7 W
Torque: 0.042 Nm - 0.059 Nm
Rotational speed: 1,200, 1,000 rpm
The ASM 24 series, and the ASM 26 series are synchronous motors with ball bearings. The series have a shaft with speeds ranging from 1,000 rpm up to 1,500 at 50 Hz. Its rated voltage ranges from 1 V to 12 V and from 3 V up to 500 V.
ASTRO Motorengesellschaft
High-Speed Machines - Asynchronous machines for test bench applications Small volume Optimised mass moment of inertia Low vibrations Low maintenance requirements Design features To relevant standards IEC, VDE, DIN, ISO, EN Degree of ...
Schorch
High-Speed Machines – High-speed asynchronous machines for industrial applications Reduced volume and weight Technical and economical process optimisation Low vibrations Low maintenance requirements Design features To relevant standards ...
Schorch
Power: 500 kW
... Converter-controlled machines Energy-saving designs (optimised efficiency) High-Speed Machines up to 15,000 rpm and 500 kW Motors for marine applications to regulations of international classification societies
Schorch
Power: 0.33 ch - 10 ch
Torque: 1.0105 ft.lb - 30.0999 ft.lb
Rotational speed: 0 rpm - 1,800 rpm
Standard Features - Manual Reset Protectors - High Efficiency Dual Cap Design - High Quality Molded Gaskets - Over 300% Starting Torque - Cast Iron End Bells - Dual Oversized Ball Bearings - Dependable Mechanical Starting Switch - ...
Techtop
Power: 0.09 kW - 18.5 kW
MS series aluminium housing three-phase asynchronous motors, with latest design in entirety, are made of selected quality and conform to the IEC standard. MS motors have good performance, safety and ...
Power: 5 W - 115 W
Torque: max 0.09 Nm
Rotational speed: 246.1 rad.sec-1 - 314.16 rad.sec-1
... ElectroCraft SurePower™ C-Frame AC Motor Size: up to .5 inches Torque: up to 13 oz-in Reliable. Just Your Size. The C-Frame ElectroCraft SurePowerTM AC motor ...
Electrocraft
Power: 35 W - 161 W
Rotational speed: 3,449.97 rpm
The SPP30P ElectroCraft SolidPower™ Plus Housed AC Motor features a permanent slip capacitator as its AC type. It is a motor with a diameter of 3.03 inches which can work continuously ...
Electrocraft
Power: 82 W - 266 W
Rotational speed: 1,220 rpm - 2,450 rpm
The Permanent Split Capacitor SPP33P SolidPower™ Plus is manufactured by Electrocraft. This unit has a compact and durable design, and the overall measurement is 3.3 inches, making it a mid-size device. It features a permanent split capacitor, ...
Electrocraft
Power: 2.2, 1.5 kW
ELECTRIC MOTORS Foot model type B 3. Insulation class IP 44 (DIN 40050. Three phase motors.
Torque: 7, 15 Nm
Rotational speed: 180, 160 rpm
The KDU Series are Direct Drive Motors which achieve 10 arc-sec positioning accuracy as well as ±0.5 arc-sec repeatability with a resolution of 0.16 arc-sec. The KDU has a large Hollow Shaft design which allows cables, ...
Power: 0.375 kW - 2.2 kW
Rotational speed: 2,850 rpm
... How to Select Pump and DC Motor Combinations: The following section contains pump/motor curves for various combinations of pumps and motors used on Stone hydraulic ...
Power: 4,021 W
Intensity: 9 A
Torque: 32 Nm
... a high torque EC Fan Motor. WHAT IS EC MOTOR TECHNOLOGY? An Electronically Commutated (EC) motor is a brushless motor where the commutation of the ...
Power: 0.8 kW - 120 kW
Rotational speed: 500 rpm - 5,000 rpm
... plants with a direct current drive - Test rigs with asynchronous motors as drive or load-testing machines - Test rigs with asynchronous generators as load-testing machines Areas of ...
Power: 2.5 kW - 70 kW
Rotational speed: 500 rpm - 3,000 rpm
... interior of the motor to the outside. The air stream does not touch the motor coil, which is housed separately. Cooling capacity is independent of the motor speed. Depending on the specific ...
Power: 0.02 kW - 18.7 kW
Asyncronous three phase motors * closed * externally ventilated * cage rotor * protection IP 55 * motor frame size from M50- M160
Carpanelli
Rotational speed: 500, 600 rpm
Diameter: 48 mm
Operating temperature: -30 °C - 80 °C
The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired.It could be ordered in clockwise, anticlockwise and no-sense rotation.
Rotational speed: 450, 375 rpm
Diameter: 38 mm
Operating temperature: -30 °C - 80 °C
The syncronous motors work only from an alternate current and consequently their speed is strictly bound to the frequency of the power line wired. It could be ordered in clockwise, anticlockwise and no-sense rotation.
Power: 0.06 kW - 315 kW
Rotational speed: 3,000, 1,500, 1,000, 750 rpm
Diameter: 56 mm - 355 mm
Huifeng’s three phase motors are general purpose motors and designed according to IEC 60034. The motors can be customized according to your requirement. •Junction Box is 90° Rotatable ...
Huifeng Motors
Power: 0.25 kW - 2.2 kW
Rotational speed: 3,600, 1,800 rpm
Operating temperature: -10 °C - 40 °C
Huifeng’s NEMA standard series motors are designed in accordance with NEMA MG.1:2016. •Rigid base (Welded on), or C-face with removable reet or round body (footless) are optional •T flange and customized shaft end ...
Huifeng Motors
Power: 0.06 kW - 1.5 kW
Rotational speed: 1,500, 3,000, 1,000 rpm
Diameter: 56 mm - 90 mm
Stainless steel Motors for food processing, pharmaceutical and other applications requiring extreme cleanliness and frequent washdowns When food, beverage or pharmaceutical production plants are washed down, the motors ...
Huifeng Motors
Power: 0.09 kW - 18.5 kW
... of variants: ABM AC induction motors are available as energy-saving motors, single-phase motors, liquid-cooled motors, two speed motors, ...
... output. Thanks to optimized cooling characteristics, the special enclosed AC motor design with housing and cooling fins enables a constantly high continuous output. As traction motors in battery-operated ...
Rotational speed: 6,000, 7,250, 7,000 rpm
... enclosed motors for short-time duty. This special design without a housing features high peak powers and an optimum price-to-performance ratio. Typical uses are applications with high peak loads and low continuous outputs, ...
Power: 0.06 kW - 22 kW
Operating temperature: -20 °C - 40 °C
... 2018, the manufacture of HL motors has been fully automatic. We have thus eliminated human errors that could result in qualitative shortcomings. We provide complete servicing, diagnostics and calibration of electric ...
CAG Electric Machinery s.r.o.
Power: 0.06 kW - 3 kW
Rotational speed: 1,500, 3,000 rpm
Operating temperature: -20 °C - 40 °C
HM motors are delivered in two variants. HM1 for the expected performance during the motor run or HM2 for the expected performance during the motor startup and run. In our company, ...
CAG Electric Machinery s.r.o.
Power: 0.75 kW - 355 kW
Operating temperature: -20 °C - 40 °C
... 2018, the manufacture of HL motors has been fully automatic. We have thus eliminated human errors that could result in qualitative shortcomings. We provide complete servicing, diagnostics and calibration of electric ...
CAG Electric Machinery s.r.o.
... synchronous and asynchronous motors. Our high efficiency motors enhance the capacity to generate the maximum benefits for those who going to use them. The objective of the TDM is to provide high-performance ...
Power: 20 W - 250 W
• Asynchronous and brushless motors with high energy efficiency and low consumption • Programmable electronic board • Low noise and vibration • Possibility of combining motor ...
Power: 20 W - 300 W
• High performance asynchronous motors combinable with stainless steel fans • Power output: 20 – 300 W Applications • Professional kitchen ovens
•High efficiency asynchronous and brushless motors for kitchen range hoods • Programmable integrated electronic card (fixed speed or 0-10V control) • Air flow from 350 to 900 m3/h • ...
Power: 1 ch - 400 ch
Rotational speed: 1,500 rpm
... inpro seals Two-year warranty High Horsepower Motors For applications requiring a higher horsepower motor, Magnetek offers Blue Max motors in a 5000 series frame, capable of up ...
Power: 1,160 W - 2,200 W
... commutator motor and single fan stage. The rotor is supported with two ball bearings enabling vertical or horizontal installation of motor. The motor is designed for insulation class ...
DOMEL D.O.O.
Power: 0.09 kW - 30 kW
Our IEC normalized motors comply with all the applicable international standards, including the EMC and LV Directives. The power supply could be three phase with IE1, IE2 and IE3 efficiency class or single phase. The ...
Stm Spa
Power: 21 kW - 420 kW
Intensity: 42 A - 700 A
Torque: 65 Nm - 1,340 Nm
• IEC axle heights 100-225 • Cooling type IC06 with open circuit circulation • Compact design • Very long service life • Large field weakening range • Low maintenance (brush-free) • High degree of effectiveness Therefore ...
... solutions of motors / motorizations. Most common used motors are: hydraulics (working on a range of 25 to 400cm3/rev.), direct current electric motors with inner reduction ...
Power: 0.12 kW - 4 kW
Torque: 0.6 Nm - 19.9 Nm
Rotational speed: 1,500 rpm - 3,000 rpm
... FULLY ENCLOSED (IP 55) STANDARD ASYNCHRONUS MOTORS Single-phase motors comply with the same standards as 3-phase motors in mechanical terms. The rotating field that creates the motor ...
Gamak Makine Sanayi A.Ş.
Power: 0.1 ch - 1 ch
Rotational speed: 825, 1,075, 1,625 rpm
... Direct Drive Blower Motors are designed to meet manufacturer’s requirements for drive ventilation units The PSC Ventilation Direct Drive Blower Motor is continuous duty and air over Designed ...
Gw industry
Power: 0.333, 0.25, 0.75, 0.5 ch
Rotational speed: 1,725 rpm
Resilient Base Motors-Single Phase Fan & Blower Service GW Single Phase Fan&Blower Motors are suitable for belt-driven fan or fan-on-shaft applications The Single Phase Fan&Blower Motor ...
Gw industry
Power: 0.16, 0.25, 0.33, 0.5, 0.75 ch
Rotational speed: 1,725 rpm
Residential/Industrial-Split Phase-Belted Fan Motors GW Residential Industrial Belted Fan Motors are low starting torque The Residential Industrial Belted Fan Motor has automatic overload ...
Gw industry
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining