|
|
Verlinde has always been among the first companies to introduce new ideas for the innovation of hoisting units with a hook (more than 70 patents taken out in France and around the world).
The new Eurobloc VT electric wire rope hoist has been created within this avant-garde spirit, as it accounts for a total of 13 patents on its own.
|
|
The rigorously modular construction of STAHL CraneSystems's SH and SHW ranges permits practically unlimited combinations of components both for simple and for individual solutions. The modular system ensures efficient production at the highest level of quality and maximum flexibility. Five frame sizes of the SH range with 26 S.W.L. variants, from 500 kg to 100,000 kg, are available and can be used in standardised cranes, custom-built cranes or in overhead conveyor systems.
STAHL CraneSystems's SH wire rope hoists are also available in explosion-protected design.
STAHL CraneSystems was the first manufacturer to implement the latest ATEX regulations on mechanical explosion protection in the whole production range.
|
|
Basis on the Eurobloc VT the EX version offer explosion protection according to EEx de IIB T4 degree (ENDIN) as standard :
Two-speed pole-change hoisting motors with thermistors (motor according to EEx IIB or IIC).
EX Hoist upper and lower limit switches.
EX electro-mechanical overload protector.
Electric cubicle and cable plug according to EExd IIB or IIC.
Motor protection IP55 according to EN 60 529.
Push button box according to EExd IIb or IIC with an emergency "stop" button.
|
|
The rigorously modular construction of STAHL CraneSystems's SH and SHW ranges permits practically unlimited combinations of components both for simple and for individual solutions. The modular system ensures efficient production at the highest level of quality and maximum flexibility. Five frame sizes of the SH range with 26 S.W.L. variants, from 500 kg to 100,000 kg, are available and can be used in standardised cranes, custom-built cranes or in overhead conveyor systems.
STAHL CraneSystems's SH wire rope hoists are also available in explosion-protected design.
STAHL CraneSystems was the first manufacturer to implement the latest ATEX regulations on mechanical explosion protection in the whole production range.
|
|
|
ABUS Wire Rope Hoists lift up to 100 t SWL and provide modern technology with the highest possible reliability levels. They offer very compact design, very easy maintenance and come with precision travel and precision lifting speeds as standard.
|
|
|
DR rope hoists and Demag standard cranes make it possible to achieve a wide variety of designs which guarantee to provide an optimum balance between costs and performance to meet your specific needs. In addition to a space-saving design, they offer particularly high hoist speeds for fast handling rates and comprehensive standard features. The range of possible applications for the rope hoist is extended by the compact double-rail crab and the versatile foot hoist variant.
|
|
The H-LIFT wire rope pulling hoist is an extremely versatile and portable unit for pulling, lifting, lowering and securing loads, that is both easy and safe to operate. It comes in three sizes with capacities of 800kg, 1600kg and 3200kg.
All hoists are supplied complete with 20 meter wire rope and an extendable operating lever.
Wire rope is tapered one end and fitted with a hook and safety catch at the other end.
The hoist has low maintenance requirements and is easy to service.
Overload protection ensures high personal safety when in operation.
Specially built-in shear pins can be replaced without removing the load.
|
|
- Hoists from 1 to 50 Tonne
Foot mounted,
Low headroom Monorail, Birail
- Overhead travelling crane kits
from 1 to 50 Tonne
Single girder, Double girder
- Crane end-carriagesfrom
1 to 50 Tonne
|
|
Donati wire rope guarantees maximum safety in hoisting up to 40.000 kgs. The competence and experience in design and production, the quality of componetns used, the high tecnology employed in the production of mechanical parts, in the finish and in surface treatments as well as the certified quality system UNI EN ISO 9001:1994 which regulates all the company's activity, allow Donati Sollevamenti to offer a product in line with the most modern international regularity standards.
The DRH electric rope hoist ensures use in a wide range of situations, reliability over time and safety in all operative phases.
The special hydro-repellent finish, obtained by an electrostatic process, guarantees long life and consistency in performance even in particularly hostile environments.
The company offers a 3-year guarantee starting from the date of delivery, all at a reasonable price.
|
|
The SpeedHoist electric rope winch is specially designed for fast load handling applications with loads weighing up to 160 kg.
It is used when it is not necessary to balance the load or no compressed air is available.
|
|
----SH series steel rope electric hoist have newest designing with quadrate outline, modularize construction, good unitized capability. The fundamental mode combine is very convenient and multiform.
-----The special drive composition method is very stationary which save the usual long transmission shaft.
----The reducer use planet speed @down drive which have high effective , low yawp , long using life.
----Unique column rotor, taper breaking wheel motor with low yawp , disk reliable.
-----With the advanced technology from overseas, the guide rope unit is very reliable and safety.
----High precision and super mechanical spin limiter.
High quality control electric component with low malfunction.
----The products from 400kg to 50t with fully series , which are complied with the up to date international and domestic speciality standard.
|
|
There are two main types of electric hoists:
Chain hoists...
- lift by pulling the chain through sprockets and depositing the chain into a chain container
- are more common for applications below 7.5 tons
- require less maintenance
- are less expensive
- provide true vertical lift at no extra cost
Wire rope hoists...
- lift by wrapping cable around a grooved drum
- dominate the market at 10 tons and above
- offer very fast lifting speeds
- offer a wide array of options
- can be rated H-5 (severe duty)
Both chain and wire rope hoists are rated H-4 (heavy duty) or H-3 (moderate duty). Duty ratings are a better indicator of hoist durability than hoist type (chain or wire rope). Both types use similar motors, brakes and controls. The main difference between electric chain hoists and wire rope hoists is in the design of the lifting mechanism.
Be sure to request an H-4 rating on either your chain or wire rope hoist to ensure long life and low maintenance.
|
|
|
|
|
|
Our Electric Wire Rope Hoist range provides versatile solutions for crane, monorail and replacement applications. The new innovative CXT hoists with superior performance, safety and space saving design for loads up to 80 ton.
- Low headroom trolley
Most common solution employed for single girder cranes and monorails. Most compact design for maximal space utilisation.
- Double girder trolley
Ideal solution for heavier loads used in double girder cranes.
- Normal headroom trolley
Mainly used in monorails when side clearances are restricted or for applications with curved runways.
The CXT wire rope hoists break the traditional mold of design and represent a totally new approach within the lifting equipment industry. The CXT hoists offer:
- Revolutionary Compact Design
The innovative design concept of the CXT makes the high performance hoists smaller in size and lighter in weight. The XT offers exceptional hook approaches and lifting heights. The available space can be utilized better, the floor area and height of the building also. Replacement of old hoist is made easy.
- Easy and Effective Load handling
The CXT hoists offer exceptionally smooth movements and fast load positioning. Inverter control in trolley traveling is standard, which maintains minimal load swing. The innovative design with a large rope drum diameter means that the horizontal travel of the hook during lowering is minimal. Obviously accurate load positioning is faster.
- Exceptional Performance
Konecranes developed for the CXT new high performance hoisting motors, which combines extra power with superior cooling characteristics. These hoisting motors with 60 % ED not only increase performance required even in temporary peak usage situations, but also improve reliability. Two speed hoisting and inverter controlled smooth travelling motion makes the material handling times shorter and boost the productivity.
|
|
NOVA L - Single-girder trolley, compact design
The compact NOVA L single-girder trolley offers optimal installation and approach dimensions and easily accessible electrical and wearing parts.
The electric wire rope hoist has a modular design without any welded parts. Amongst other advantages, it ensures optimal motor cooling even at extremely high power.
|
|
NOVA explosion-proof electric wire rope hoists from SWF, including the basic models, feature powerful motors, compact installation and approach dimensions and an extremely long service life.
Our comprehensive quality assurance and stringent production controls guarantee the highest possible safety standards in operation.
|
|
Safety is our primary concern - The new DR wire rope hoist has the standard features you need, for safe operation you can trust.
- Brake & Load Spectrum Monitor
- Wire Rope Pinch Protection
- Bottom Block Grip Handle
- Trolley Drop Stops
- Audible Warning Device
Reliability you can expect - Designed for long life and backed with a long 2 year "no catch" warranty.
The DH hoist is the Performance Standard for your high capacity lifting requirements.
- Modular design - Many configurations, speeds, rope lead off positions and reeving arrangements are possible. Base mounted and a variety of standard trolley designs are available.
- Heavy Duty - High duty, high cycle rated hoists with single, 2 speed, or VFC, lug or trolley mounted, to 100 Ton Capacity
- Many features & options - Demag DH wire rope hoists incorporate advanced electrical and mechanical engineering features and options - standard rope guides, optional "Load Halt" and overload protection.
|
|
Electric winches of lifting in conformity with the standards, regulations and texts in force defining the elevating lifting devices. For small handling in mobile workshops, on cranes and brackets, for commercial vehicles or heavy trucks.
WARN H 3000 GF: 880 daN. Available in 12 or 24 V
WARN H 500: 400 daN. Available in 12 or 24 V
WARN H 350: 245 daN. Available in 12 or 24 V
|
|
The New Century Séries® Wîrc Rope Hoists -1 to 25 Ton Capacîty
The Design Results From Years of Material Handling Engineering and Manufacturing Knowledge and Experience-Utilizing Space-Age Techniques and Materials While Retaîning the Superior Design Features and Quality of Current Hoists.
Standard Features: OVERLOAD CUTOFF
Protects load, hoist and operator by înterrupting raîsing circuit when hoist sensés a damaging overload. When lifting circuit is interrupted, the lowering circuit remains intact to allow the load to be lowered and removed. After the overload is removed the lifting circuit is automatically restored. Overload Cutoff is accessible for fïeld adjustments.
|
|
Range supplements hoists HPR, suspended and double rollings up.
All tonnages - important Stock
Consult your outline dimensions on our Internet site www.seral.fr
|
|
| ... products without technical information |
| |
... see all the products in the category
Hoists
|
 see the results for the following category : Winches |
|
|
