|
|
Hexagonal protective caps GPN 1000
Perfect protection against corrosion, dirt, damage and injury.
Snap-on caps for hexagon nuts GPN 1010
For hexagon nuts. Secure fit through circumferential clamping rim.
|
|
|
|
|
|
Protective caps GPN 200
Cylindrical caps with milled collars
Grip caps GPN 210
Flexible protective caps with practical handle-type loop for all types of circular parts.
Grip caps GPN 215
Flexible protective caps with practical handle-type loop for all types of circular parts.
Protective caps GPN 240
Protect the mating surfaces of SAE quick connecting plugs.
Protective caps for pipes GPN 250
Particularly suitable for the transportation and storage of pipes.
Protective caps GPN 255
Flexible protective caps, heat-resistant up to approx. 250 °C.
End caps for section pipes GPN 280
For section pipes
Stoppers GPN 350
For use as stopper or cap; with cylindrical shank.
Tapered plugs GPN 600
Numerous applications, including sealing drillings and internal threads.
Universal protective plugs GPN 610
Internal or external protection for various applications.
Universal protective plugs GPN 620
Similar to the 610 Series, but with a larger cover flange.
Protective caps GPN 690
For the protection of SAE flange collars, pipe ends and hose-fittings. Easy and secure fitting.
Stoppers GPN 900
Cylindrical design, for universal application as stoppers or caps.
Fast-fit caps GPN 940
Fast-fit caps with flap for valves, external threads and bolts.
Protective plugs GPN 950
For internal or for external fitting.
|
|
Protective caps for shafts GPN 290
For the protection of shaft ends and for securing the feather key.
Protective covers for loop ends GPN 695
For loop holes. Perfect fit through internal sealing ring.
Dust caps and plugs for quick-seal couplings GPN 920
For quick-seal couplings. Integral retaining strap prevents accidental loss.
Dust caps and plugs for quick-seal screw couplings GPN 930
For quick-seal screw couplings; prevents the leakage of residual oil.
Fast-fit caps GPN 940
Fast-fit caps with flap for valves, external threads and bolts.
Grease nippel caps GPN 980
Protect the conical head , mark the greasing point, secure fit provided by the undercut around the nipple head.
Grease nippel caps GPN 985
Easy removal by the conical head.
|
|
|
The range of Skiffy caps and plugs is extensive and applicable for unlimited number of occassions, fasteners and tubes: protection caps and plugs, grease nipple caps, tube plugs, torx caps, cover caps, decorative plugs, ribbed inserts, etc.
|
|
Screw caps GPN 800
Available in a wide range of thread types and sizes.
Screw caps GPN 801
Available in a variety of different thread types and sizes.
|
|
CAPSPLAT DECO
Material: LDPE
Colour: Black - White - Grey - Several standard RAL colour are available on request
Dimensions : mm
CAPSPLAT DECO are intended for inside protection
Ideal when smooth finish is required
|
|
LDPE protective caps with or without a flange. Thread protection, Non-threaded tubes. Moisture and dust prevention.
Available metric and imperial sizes.
|
|
|
Alliance Plastics manufactures a full range of non-threaded protective caps to protect your product and suit all your application needs. Our protective caps are available in many sizes, styles, materials and colors.
|
|
plastic cap
Material: LDPE
Colour: Natural or Yellow
Dimensions : mm
Standard : BSP* DIN 259 (DIN ISO 228) and Pipe
CAPU103 are intended for tube and outside protection
Available in softem's range
(well adapted to highest mechanical specifications and heat resistance)
|
|
|
Caplugs manufactures a complete line of caps designed to protect virtually any product for virtually any application. We offer protective caps manufactured from plastic (low or high-density polyethylene), FlexTemp (for high heat resistance), silicone rubber, aluminum, paper, and vinyl. Our selection includes threaded and tapered caps, flange covers, and static protective caps for product protection during shipping, packaging, or production processes. Whether you're protecting tubes, pipes, fittings, O-ring ports, furniture, or a part requiring a custom solution, Caplugs has the cap you need.
|
|
|
Protective and flexible vinyl caps. Available as round, square, rectangular and custom shapes. Customise colours and materials such as high temperature vinyl for surface treatments.
|
|
|
Pull tab caps in flexible yet durable vinyl plastic. Ergonomic tab for easy removal. Custom colours and materials available.
|
|
Silicone caps and plugs for high temperature surface treatment masking (especially powder coating).
Also available in EPDM for chemical resistance.
|
|
Material : SILICONE / EPDM
Colour : Natural / Black - Colour on request
Dimensions : mm
The silicone caps are ideal when temperature resistance is required (316°C)
The EPDM caps are ideal when lower temperature resistance is required (246°C)
|
|
CAPUPVC RO CA RE
Material: PVC
Colour: Black - other colours on request
Dimensions : mm
CAPUPVC RO are intended for outside round protection
Ideal when smooth finish is required
Flexible caps fit easily onto irregular sizes (cable end seals, connectors).
The lenght can be modified to your requirements
|
|
Alliance Plastics offers one of the most versatile and complete threaded cap and plug ranges in the industry with 45 styles to choose from. These styles are designed to protect your mating threads from nicks or dings that may occur anytime up to final installation. Our threaded caps and plugs mate with all of the world’s most common thread styles which include:
Imperial/Standard threads (UN, UNF, UNS, UNC and SAE) - 17 styles
4 styles that seal for superior leakage protection
Metric threads - 8 styles
1 style that seals for superior leakage protection
NPT Threads - 7 styles
1 style that seals for superior leakage protection
JIC Threads - 6 styles
BSP/Gas threads - 5 styles
1 style that seals for superior leakage protection
UNJ/UNJS - 2 styles
|
|
|
Caplugs manufactures a complete line of caps designed to protect virtually any product for virtually any application. We offer protective caps manufactured from plastic (low or high-density polyethylene), FlexTemp (for high heat resistance), silicone rubber, aluminum, paper, and vinyl. Our selection includes threaded and tapered caps, flange covers, and static protective caps for product protection during shipping, packaging, or production processes. Whether you're protecting tubes, pipes, fittings, O-ring ports, furniture, or a part requiring a custom solution, Caplugs has the cap you need.
|
|
Threads are supplied on heavy walled glass and are designed as to fit the PTFE 32 and 45 adapter products
PBTP polymer with PTFE faced liner, ISO threads available in 32 and 45mm. Useful temperature range is between -45 and +180º C.
Screw Cap, Open Top without PTFE Liner
Required when using PTFE adapters Article No. 1085, 32 and 45mm sizes. Caps are PBTP and may be used up to 180º C. Caps can be used with PTFE faced silicone liners Article No. 8275. Optional use with syringes for reagen introduction or sampling.
|
|
Flange covers GPN 640
For the protection of SAE flanges during painting, transport or storage.
Flange covers GPN 650
Seals the aperture and protects the sealing face of DIN-type flange fittings.
Flange covers GPN 655
Seals the aperture and protects the sealing face of ISO-type flange fittings.
Flange covers GPN 670
Broad range of applications through fins; sealing face and screw holes are protected.
Flange caps GPN 680
Hook-snaps provide secure fits during handling.
Protective caps GPN 690
For the protection of SAE flange collars, pipe ends and hose-fittings. Easy and secure fitting.
|
|
|
|
|
|
The SEAL-PLUSTM
restraining end features...
- A proven wedge-shaped gasket... a
Dresser benchmark for over 100 years
- Common end assures uniform installation procedure for the entire product line...no need for additional training
- Mechanically loaded gasket pressure for a positive seal
- Volume compensating spring washer adjusts and maintains gasket pressure
- External grip on plastic...meets all D.O.T. code requirements
- Bottom-out tightening provides a visual verification of proper installation
- Simple, quick installation...easy stabbing at low temperatures
- Pressure and temperature ratings equal to the P.E. pipe
The design of the SEAL-PLUSTM Restraining End delivers many proven features which contribute to both ease of installation and permanent, leak-free service. There's a proven wedge-shaped gasket, a Dresser benchmark for over 100 years. And a volume compensating spring washer that adjusts and maintains the gasket pressure, even at extremely low temperatures.
Visual verification of proper installation is attained through ottom-out tightening of the nut against the body. A color code on he insert verifies that it is properly sized for the wall thickness of he tubing on which it is being installed.
|
|
|
PLASTEM is at your entire disposal for plastic caps, pull caps, flange protection, plugging, end caps, bolt caps, nut caps, screw caps, plastic protectors, caps plugs, blanking plugs, covers, protective closures, industrial closures, bumper pads, wheel inserts, piston lids, piston lids rectangular Trutzschler Schlafhorst, piston lidsrectangular Rieter for spinning can. We are distinguished by assuming responsibility for engineering plastic product and complete projects from engineering with study and realisation of moulds to the manufacturing.
|
|
Alliance Plastics is the leading supplier for flange protection applications. We have the broadest selection of flange covers for full-face or raised-face requirements. With nominal size protection from ½” to greater than 48," actual diameter and material preference of PE, pressboard, EVA, or corrugated LDPE, Alliance Plastics maintains the largest selection of protective covers for flanges in accordance with ANSI/ASME B16.5 standards.
We continually strive to add new and expanded products to fit a broad range of customer applications.
We also carry a large section of no-fastener needed flange protectors for standard and high pressure code-61 and code-62 requirements. With the availability of fastener accessories and cable ties for securing purposes, we cover the best selection of protecting standard industrial flanges.
|
|
The use of SFW/WP pressurised breather cap which create a pressure plenum chamber right above the oil level within tested limit conditions, in order to avoid any reservoir deformation, offers the following advantages:
- reduces reservoir air volume intake keeping clean oil and filter
- improves suction pump action during working conditions reducing cavitation phenomenon
- prevents fluid leakage when the system is part of a mobile unit
- reduces foam in fluid.
|
|
BOLT AND NUT PROTECTION CAPS
CAPU240 are intended for hexagon shaped
Bolt and nut protection caps
Protect against weathering and tampering
Enhance finished appearance
Material: LDPE
Colour: Black - White - other colours on request
Dimensions : mm
|
|
Screw caps
Material: LDPE - PA (Ref: RAK)
ColOur : Black, White, Natural (Ref: RAK)
Other colours on request
Dimensions : mm
- CACHE VIS are intended to protect and cover screws and rivets
|
|
|
|
|
|
Closure plugs GPN 300
Versatile, flat headed blanking plugs, delivered either with a small or a wider head diameter.
Finned plugs GPN 320
Disks in the shank area bring about a firm fit.
Covers GPN 340
Particularly suitable for recessed hexagon socket head screws (Allen screws).
Stoppers GPN 350
For use as stopper or cap; with cylindrical shank.
Tapered stoppers GPN 500
Solid construction, especially suitable for internal threads and drillings.
Screw-in plugs GPN 550
Self-tapping stoppers with practical gripping collar.
Tapered plugs GPN 600
Numerous applications, including sealing drillings and internal threads.
Tapered plugs GPN 605
Solid tapered plugs, heat-resistant up to approx. 250 °C.
Universal protective plugs GPN 610
Internal or external protection for various applications.
Universal protective plugs GPN 620
Similar to the 610 Series, but with a larger cover flange.
Stoppers GPN 900
Cylindrical design, for universal application as stoppers or caps.
Covers GPN 910
Flat design is particularly suitable for the protection of openings in casings and pocket holes.
Protective plugs GPN 950
For internal or for external fitting.
|
|
|
Round and square caps. Paint cone caps and paint protections in different dimensions. For further informations visit our catalogue.
|
|
Floor leveling plugs GPN 265
Vertical adjustment by an adjusting screw with an extra strong hexagonal top.
Grip seals GPN 335
For the transportation and storage of hose fittings.
Dust caps and plugs for quick-seal couplings GPN 920
For quick-seal couplings. Integral retaining strap prevents accidental loss.
Dust caps and plugs for quick-seal screw couplings GPN 930
For quick-seal screw couplings; prevents the leakage of residual oil.
|
|
Threaded plugs GPN 700
Available in a wide range of thread types and sizes.
Threaded plugs GPN 710
With collar and slotted external square for simple assembly.
Screw plugs GPN 720
Retractable screw-stopper with hexagon socket.
Sealing plugs GPN 730
The rotating sealing lip, within certain limits, prevents the admission or leakage of liquids.
Sealing plugs GPN 735 / 736
Thread openings are protected from the admission or leakage of liquids, within certain limits.
Sealing screw plugs with O-ring GPN 737 / 738
The sealing screw plug corresponds to GPN 735/736, but is additionally fitted with an O-ring.
|
|
Screw caps
Pozidriv screw caps
Screw caps for Phillips screws
Screw caps for TORX screws
Rivet caps
Screw caps for countersunk TORX screws
Decorative screw caps
Allen screw caps
Caps for flat head screws
Caps for various screws
Covers for hex washer faced screws
|
|
|
|