Chucks

Clamping range: 18 mm - 140 mm

Clamping range: 12 mm - 130 mm

Rotational speed: 1,200 rad.min-1 - 10,000 rad.min-1

A floating tool holder to be used with XEBEC Brush Surface™, a ceramic fiber CNC deburring tool. The built-in spring helps to maintain a stable load, enabling consistent performance, thereby extending the tool life by up to 4 times. ...

Rotational speed: 5,000, 10,000, 6,000 rpm

A floating tool holder to be used with XEBEC Brush Surface™, a ceramic fiber CNC deburring tool. The built-in spring helps to maintain a stable load, enabling consistent performance, thereby extending the tool life by up to 4 times. ...

Compact tool holder which length under the gage line is 23.5mm (including bush flange thickness 1.5mm). Optimal when available space is limited. A compact tool holder ideal for use when available space for tooling is limited inside the ...

SELECTED TO LAST. Diversity, high quality and precision: Tool holders from 8x8 to 32x32 mm. This is where you’re assured to find the right KMH tool holders to meet your requirements: with or without through tool cooling, for almost ...

PRECISION ON THE FLY. Tool changes with speed, precision and flexibility: HSK-T tool holders from ARNO. With HSK-T, you benefit from the advantages of the HSK interface for turning applications on multi-task turn-milling centres, ...

Part-off holders and flange mounted holders Machine specific flange mounted holders for use with SA part-off modules, blades, monoblock holders, and monoblock holders SE. The modular holders can be mounted either normal or upside ...

HSK-E For high speed cutting (HSC) For automatic tool change Without any drive keys for absolute symmetry

T.I.R. <3 μm ID Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID Chip Hole per DIN 69873 with 10 mm diameter Q+ Balancing, ...

TC (SK) Toolholders Specifications T.I.R. <3 μm ID Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID ...

Product Description Model No. LDC-BT30 / LDC-BT40 / LDC-BT50

LDC-HSK_A TYPE Product Description Model No. LDC-HSK63A / LDC-HSK100A

LDCB TYPE Product Description Model No. LDCB-HSK63 / LDCB-HSK50

Clamping range: 20 mm

High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper ...

Clamping range: 25, 32, 20 mm

High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper ...

Clamping range: 20, 25, 32, 42 mm

High-precison Toolholder Provide high-precison and good balance characteristics. Clamping force is evenly distributed along the entire tool shank to improve rigidity and surface finish Black oxide finish for antirust Type of taper ...

Clamping range: 0.3 mm - 34 mm

16 degree Collets with DIN6499/ISO15488 Standard. EVERY SINGLE Alps Tool's AR collet is inspected without exception. The collets are inspected THREE TIMES at different position, and only those that meet the standards THREE TIMES are ...

Alps Tool’s NICE MILL is a product that provides total support for machine tool tooling by making collet holders, AR collets, nuts, and other tooling compatible. This series offers a wide variety of collet holders, AR collets, nuts, ...

Adjustable cutting edge for Y axis positioning. It can be use for coolant through Alignnable chuck center line and drill center line.

Clamping range: 80 mm - 400 mm

Precision spiral ring chuck made of steel with cylindrical centering according to DIN 6350. The chuck enables uniform clamping force by centric clamping jaws as well as high runout accuracy. Three-jaw ...

Clamping range: 115 mm - 210 mm

Pneumatic or hydraulic three-jaw chucks for individual mounting on the machine table or for workpiece automation. Advantages at a glance Design: Stainless cylinders, dust and splashproof Material: steel Finish: ...

Clamping range: 80 mm - 162 mm

Mechanical manual chucks with high precision, holding force and rigidity for use on machining centers, prototyping and metrology. The version SK -2 provides, due to the optimized force transmission in both axial directions, ...

We carry a variety of CAT 40 end mill holders and CAT 50 end mill holders in metric and inch sizes. Also, find Morse Taper Holders, Jacob Taper Adapters, and Shell Mill Holders for CNC milling. CAT tools are also known as Caterpillar “V-flange”.

Collet bore is exactly tool diameter for accuracy and rigidity Permit synchronous tapping operations using any standard collet chuck Available sealed for coolant-through applications

Permits tapping using RD/ER 16 collet system Ideally suited for applications on Swiss and Japanese automats and lathes

Clamping range: 11 mm - 31.5 mm

nickel-plated • especially high wear resistance • optimised coolant duct exit • optimised flute cross-section • clamping screws art. no. 4071 included • order screwdriver art. no. 1612 separately

Clamping range: 6 mm - 32 mm

HSK-A according to ISO 12164-1 / DIN 69893-1for MQL 1-channel systems, Gühring MQL identifiable by green colour ringbalancing quality: G 2.5 / 25,000 rpm or rev. < 1 gmmfor tool shanks d1 h6axial length adjustmenT

Clamping range: 10 mm - 25.4 mm

Round shank holder for inserts type 104 To see prices, please log in. New customers can create a user account HERE or add the desired products to the shopping cart and then send a request for quotation. with internal coolant supply

LIVE CHUCK FLANGE: 380 max. 1 µm with pressure compensation with sealing ring hardened jaws + soft top jaws chuck in cast or steal shaft MT 2 / 3 / 4 / 4S / 5 / 5S / 6 / 6S

Clamping range: 68 mm
Rotational speed: 8,000 rpm

Axial drilling and milling head with offset axes Premium class tooling system for highest production efficiency - Made in Germany With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. ...

Rotational speed: 8,000 rpm

With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, ...

Rotational speed: 6,000 rpm

With the patented quick-change system EWS.Varia VX, you perform the tool change faster than your competitors. In addition, your driven tool adapts to your requirements in the future. Due to the modular interface, for each machining process, ...

Clamping range: 0.2 mm - 25 mm

• - Holding force up 1100 Nm • - WZ-Concentricity < 0,003 mm • - Clamping procedure <10 Sekunden • - Clamping diameter from 0,2 - 25 mm

Rotational speed: 20,000 rpm

■ Suitable for high-speed and high précision cutting; ■ Balanced: G2.5; ■ Runout (X3D): < 0.003 mm.

Rotational speed: 25,000 rpm

■ For high-speed and high précision cutting; ■ Balanced: G2.5; ■ Runout (X3D): £0.003 mm; ■ No interference due to slim design.

HSK-A-SF shrink-fit holder | high precision | high rigidity Features: ● Adapter standard: HSK DIN69893-1; ● Run out: ＜ 0.005 mm; ● Balanced: G2.5; ● Integrated model with outstanding accuracy, rigidity, and balance capability. Application: This ...

To offer our customers a complete range of solutions, TDM SA supplies the following: auxiliary units, ISO and HSK interface cones, tool holder cones, extensions and collets with clamping nuts. They are optimized to be used in combination ...