Chucks

159 companies | 1,126 products
SK tool holder
SK tool holder
TC 30 series

T.I.R. <3 μm ID Taper to OD Taper Taper Accuracy AT3, better spindle-to-holder fit and accuracy Surface Finish max. Ra 0.25, higher clamping force and higher transferable torque ID Chip Hole per DIN 69873 with 10 mm diameter Q+ Balancing, ...

See the other products
REGO-FIX
workpiece clamping chuck
workpiece clamping chuck
TOPlus mini series

Clamping with pull-back effect. Chuck with standing, dismountable end-stop plate. Advantages Workpiece stabilization through axial draw force applied against the workpiece end-stop Prepared for inside and front ...

See the other products
HAINBUCH
HSK tool holder
HSK tool holder

Clamping range: 6 mm - 50 mm

Fine-balanced tool holders from Swiss origin with incorporated aluminum cooling ring. The cooling ring disperces the heat from the process away from the drilling machine, allowing for continuous production. T.I.R.

VDI tool holder
VDI tool holder

Our static toolholders are engineered to the highest stability and precision, both for turning as for boring. We manufacture multiple boring bar holders, suitable for the assembly of up to 4+4 boring bars simultaneously for machining ...

See the other products
MT
ER collet chuck
ER collet chuck
ø 25 - 42 mm | CTZ series

NTs original 4 Points adjustment system for easy, accurate and speedy runout adjustment

See the other products
NT Tool
boring tool holder
boring tool holder
HFS®

The advantages of the HFS® Head Fitting System and the opportunities this provides for manufacturing, use and preparation of reaming heads are decisive to the success of these new tool series. Simple, easy access handling when changing ...

See the other products
MAPAL
Morse taper tool holder
Morse taper tool holder
type 01

Clamping range: 2.5 mm - 10.4 mm

Insert drills, Pilots. Counterbores, Countersinks and Toolholders Download PDF file on the Counterboring System Size 01

See the other products
Granlund Tools
ER collet chuck
ER collet chuck
TUNGMAX

... - Produced from a special steel for vibration damping. - Sealed nut structure. - No axial drawback of the tool shank when chuck is tightened. Structure ① Shallow tapered front end cone ② Clamping nut ③ ...

See the other products
Tungaloy America
quick-change tool holder
quick-change tool holder
KM series

See the other products
Widia Manchester
milling tool holder
milling tool holder
Mini

... ensures rapid and exact mounting of the electrode holders in hydraulic quick-change chucks. The Mini system is a "Reverse Reference System", in which the chuck adapts itself to the electrode ...

See the other products
SYSTEM 3R
HSK tool holder
HSK tool holder

HSK-T is a new HSK system designed for turning on multi-task machines that are compatible with HSK-A type (ISO standard: ISO12164-1:2001). It was jointly developed by a consortium of Japanese manufacturers and is now used worldwide as ...

mandrel
mandrel
T-EP series

Use: turning, grinding, balancing and inspection operations High degree of expansibility 1.5 to 5 mm depending on the diameter of the sleeve Possibility to clamp worpieces with diameters ranging from 8 to 235 mm Clamping takes place as ...

See the other products
TOBLER
mandrel
mandrel

Internal clamping sleeves with double taper are suited to internal clamping of pre-machined parts. Because these have tapers and slots at both ends, the clamping sleeve is able to open in various different ways and securely hold workpieces ...

See the other products
Nann
HSK tool holder
HSK tool holder

Floating holders, axis parallel, with cylindrical, taper, HSK or VDI shank on request. Clamping range 1 20 mm, with ER/EX 8/9 32 mm nuts, oscillation from 0.1 up to 3 mm. For an accurate positioning and self centering of the reamer. ...

tapping collet chuck
tapping collet chuck
Z102

Clamping range: 25 mm

... compression tapping units for NC machining and turning centres Uses rubberflex collets (only two required) ER collet chuck available on special request Provides greater thread accuracy and higher production ...

See the other products
Sutton Tools
SK collet chuck
SK collet chuck
CB-ND

Clamping range: 0.5, 1 mm
Rotational speed: 4,500, 4,000, 6,000 rpm

In the CB-ND series collet chuck, the collet is coupled to the chuck body and remains stationary as the tapered seat moves forward when the chuck is actuated. This design keeps the collet ...

See the other products
Microcentric
tapping holder
tapping holder
GSW.512R

Quick change M5 – M12 ( 3/16" – 1/2") GSW.512R Quick Change M5 – M12 (3/16″ – 1/2″) Auto reverse Including rubber clamps GSW.172121 (Ø 4 – 7 mm) GSW.172122 (Ø 7 – 10 mm)

See the other products
Euroboor BV.
manual drill chuck
manual drill chuck
NWS-X Series

SAFETY CHUCKS WITH MECHANICAL OR PNEUMATIC CLOSING With manual or pneumatic closing and rotating or not rotating flange SELF-CENTERING SAFETY CHUCKS WITH NOT ROTATING FLANGE AND PNEUMATIC CLOSING SELF-CENTERING ...

BT collet chuck
BT collet chuck
BT series

Clamping range: 1 mm - 16 mm

... Integrated Keyless Drill Chuck Model: BT-APU Material: high quality alloy steel Usage: Drilling and milling processing Hardness: HRC56-58 Features: The handle and the chuck is combined, even ...

See the other products
Yucheng Gerzhuo Mechatronics Technology Co., Ltd.
BT tool holder
BT tool holder

Unist MQL Tool Holder Kits fit into most common CAT and BT style tool holders. The MQL optimized retention knob and MQL tool holder insert ensure proper aerosol delivery from the end of the spindle to the shank of the tool. The retention ...

self-centering workpiece clamping chuck
self-centering workpiece clamping chuck

Diam. 750 3 jaws self-centering chuck with 400 diameter extra-large bar passage

See the other products
EUROMA
workpiece clamping chuck
workpiece clamping chuck
LIVE FLANGE: 380

LIVE CHUCK FLANGE: 380 max. 1 µm with pressure compensation with sealing ring hardened jaws + soft top jaws chuck in cast or steal shaft MT 2 / 3 / 4 / 4S / 5 / 5S / 6 / 6S

machining hydraulic chuck
machining hydraulic chuck
MDE

INDEXING CHUCK WITH AUTOMATIC CLAMPING AND INDEXING – (8×45°) MDE MDE is an automatic indexing chuck with hydraulic clamping and indexing. It is not self-centering. ADVANTAGES • made in special ...

See the other products
Applied Robotics
HSK tool holder
HSK tool holder
DIN 69893 Series

Clamping range: 16 mm - 50 mm

... 06 .. .. Collet chucks ER type (DIN 6499) •004 14 12 .. .. Hydraulic toolholders •004 14 15 .. .. Great Power chucks •004 14 16 .. .. Collet chucks zENTRO LAIP type •004 ...

See the other products
LAIP
HSK tool holder
HSK tool holder
MVS series

Clamping range: 83, 200 mm

For every job Wohlhaupter has just the right connecting component. Master shank connections between the machine tool and the MultiBore modular components are supplied for all machines. The MultiBore boring tools fit straight into the ...

See the other products
WOHLHAUPTER