|
|
Holeshot® OTM™ Tools
Maximize your productivity and lower your cost per cut with OTM™ quality and variety.
- Grades
- Holeshot® Drills
- Coremaster® Coredrills
- WCMX & WCGT Inserts
- Stinger™ Drills
- Counterbores
- Countersinks
- TCMT Inserts
- End Mills
- Chamfer Mills
- Face Mills
- XPMT Inserts
- Aluminum Cutting Mills
- APET Inserts
|
|
Quad-Drill line now includes 9 standard sizes, all larger than 2 inches
Up to 30% more productivity than the drills they replaced
All sizes have 4 insert stations
Currently offered in 2:1 length-to-diameter ratios
3:1 lengths coming soon
|
|
|
The highly polished open flute not only allows for easier chip formation and evacuation, but also provides for a sharper cutting edge that delivers a better edge finish on a variety of materials. Our premium micro grain carbide allows for superb wear resistance and tool strength. Special point geometry contributes to improved bottom finish and plunging capabilities. Tools are available in upcut and downcut versions from 1/16" through 3/8" diameters.
|
|
|
|
|
|
feedMAX - Solid Carbide Drills
Highest productivity with Seco solid carbide drill. Due to the new superior quality drill Seco can help you improve your productivity by as much as 100%. Saving money and time. feedMAX offering drills in diameter range 3-20 mm. The self-centring geometry gives quality holes without pre- or finishing operations necessary. The low friction TiAlN coating secures good performance in a wide range of materials as well as an exceptional tool life. The high productivity together with the long tool life gives excellent total machining economy when using feedMAX solid Carbide drill.
Brazed Carbide Tipped Drills
Brazed carbide tipped drills in diameters 9,85-32,10 mm for drilling quality holes without any finishing operations. Self centring geometry with a TiN coated P25 micro grain carbide gives good chip control and tool life in most workpiece materials.
Coolant through the drills for safe chip evacuation.
Seco CrownLoc
Drill precision holes at low cost in the hole diameter range from 12 to 25,99 mm with Seco CrownLoc. The exchangable crowns cut all your regrinding costs. With every change of crown, a new one guarantees long and predictable tool life. Exchangable crowns also allow for high cutting speeds reducing machining cost. Optimised geometries for different workpiece materials; steel, stainless steel and cast iron, complete the advantages with the CrownLoc system.
Perfomax Indexable Drills
The Perfomax range of indexable drills, in diameters 15-80 mm, is based on long experience and the very latest technological advances in drilling. Strong square inserts for good machining economy, a rigid drill body and good chip flow enable the drills to handle high metal removal rates. The drills can be used both in rotating and non-rotating applications. A unique chip path configuration reduces noise and vibration. Drilling depths from 2 x D to 5 x D.
|
|
The all-surface tool for plunging, drilling, grooving and more.
- Multi-Function Cutter: Center cutting capability allows drilling of holes as well as other operations such as channeling, contouring, shouldering and ramping.
- 2 Identical Inserts - 2 Effective Teeth: Cutter designed with two identical trapezoidal inserts, allowing for two effective cutting edges when plunging and endmilling.
- Great Strength: Insert geometry designed for applications in high strength tool steels. Our VP5020 grade (PVD coated micrograin carbide) is highly resistant to wear and thermal shock.
- No Interference with the Part Being Machined: The cutting diameters of the cutters are intentionally made larger than the shank diameters.
- Greater Rigidity with Large Overhangs: Plunging, a milling operation along the Z-axis only, minimizes the flexing of the cutters and allows a greater overhang than can be realized with conventional milling in the X and Y axis.
|
|
"SLICK" Twist Drills for composite materials and Titanium
HTT patented “Slick” Drills are micrograin solid carbide twist drills designed for Drilling – Reaming – Countersinking in one operation (“One Up”) composite materials (AL/AL - AL/Ti - CFRP/AL - CFRP/Ti - Ti/CFRP - CFRP - Ti/Inconel). “One Up” operations offer the following benefits:
Reduction of the quantity of tools and production phases
Costs reduction
Operation Time reduction
Improvement of surface finish quality
“Slick” Twist Drills are of three fundamental types:
- For CNC machines
- For semi automatic machines (PV Tools, pneumatic tools with constant feed per revolution)
- Hand operated twist drills (with a pre-hole that enables you to obtain a finished ½” bore in one operation instead of using 8 different drills and bore processes)
|
|
The new generation of the extra large solid carbide drills up to 40 x D.
Drilling tools in solid carbide, diamond and cermets
With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
The CoroDrill 805 makes it possible to drill deep holes without moving the workpiece to a dedicated deep hole drilling machine i.e. all operations can be completed in one set-up.
Deep holes can be performed with high productivity and reliability achieving a hole quality comparable with traditional deep hole drilling. Another advantage is that no extra pump capacity is required.
CoroDrill 805 carries the same standard inserts as CoroDrill 800.
Deep holes are defined by a high ratio between hole depth and hole diameter. Deep hole drilling is the preffered method for drilling hole depths of more than 10 x the diameter up to 150 x diameter. Sandvik Coromant are a world leading manufacturer of deep hole drilling systems.
|
|
Deep Drilling
Operation with 1700 cycles granted.
These HTT gun drills are specifically designed for sferoidal cast iron and can be supplied with or without coolant holes. Surface coatings: PVD or CVD.
Range of diameters: 6-20 mm
|
|
The use of the highly wear and oxidation resistant Miracle Coating achieves long tool life at extreme feed rates or during high temperature conditions experienced during deep drilling operations.
This range of drills achieves state of the art performance and hole precision even under the toughest cutting conditions.
Ask our experts more. MPS drills on demonstration every day at EMO, Mitsubishi Materials, Hall 5, Stand D20.
Available from Ø3.0 – Ø20 l/d x 3, and up to l/d 30 for diameters up to 10mm.
|
|
Polycristalline diamond tools for optimal tool life and highly precise holes.
Drilling tools in solid carbide, diamond and cermets
With HAM´s standard tools it is possible to machine hardened steel up to 63 HRC without problems and economically. We have also developed a special line of tools designed for use of minimum lubrication or dry machining.
HAM is permanently trying to improve the quality of the carbides in close cooperation with its suppliers. Our engineers test and retest the coatings of the tools in our technology centre in order to achieve the best suitable solution.
To be recognized as a system supplier that serves complete solutions, HAM has enlarged its product range with brazed and indexable tools. These products are offered as standards or as specials tools according to customer drawing.
|
|
PCD equipped tools prove their efficiency especially for high-speed cutting applications. This cutting material usually demands high rpm, which means that the machining times are reduced substantially. Compared to the common solid carbide drilling tools very high tool lives are achieved due to the hardness of PCD tools.
Further advantages are excellent surface qualities, high cutting volume, and high thermal conductivity.
|
|
Centerdrills
Countersinks
Combined Drill & Countersink
Counter Bores
Hey Drills
Spotting Drills
Chamfer Drills
It provides a wide array of center drills and custom cutting tools.
|
|
in High Speed Steel and Carbide
Twist drills
Ratio drills
Micro-precision drills
Oil feed drills
Subland drills
Centre drills
Core drills
Gun drills
Drilling systems with interchangeable inserts
|
|
|
The MDSS "Long Multi Drill" is special designed for deep hole drilling e.g. for crankshaft machining. Cutting temperature, chip removement, strength and geometry of the drill and so called minimum quantity lubrication (MQL) have big influence to cutting process. Especially this MQL enables this carbide twisted drill to make deep hole drilling, whose L/D is more than 15, as short chips are generated by MQL. Our Long Multi Drill has a ZX coated chip generating area and a new designed chip removal area.
|
|
|
|
|
|
What is Formdrill?
Thermal drilling is a process that uses friction to produce bushings in metal tubing and flat stock.
The combined rotational and downward force of our special Thermal Drilling tool bit creates frictional heat. Temperatures can reach 900 C for the tool, and 700 C for the work piece.
The material is transformed into a "super-plastic" state, allowing the tool to displace material and form a bushing. The height of the bushing is roughly 3 to 4 times the original metal thickness.
These bushings are ideal for threaded applications, as the number and strength of threads is significantly increased. It is an excellent alternative to weld nuts or threaded inserts. The bushing can also be used as a support hole for welded, soldered or brazed connections as well as for a load-bearing surface.
The Thermal Drilling System can be used in most ferrous and non-ferrous metals including mild steel, stainless steel, copper, brass and aluminium, with material thickness up to 12 mm. In general, all malleable materials can be thermal drilled. Standard drills are available in any size up to 25.4 mm. diameter. Larger drill sizes are available on request.
No special equipment is required. A standard drill press, milling machine or CNC machining center is suitable. Thermal Drilling is also ideal for automation because it is a chipless process, produces accurate holes, and has a long tool life.
Thermal Drilling is also well suited for short run or prototype work because of its ease of use.
There is absolutely no cutting involved during the creation of the hole.
|
|
Flowdrill tools are molded and shaped from very high strength tungsten carbide. The forming part of the tool has a polygonal shape with four facets. These facets produce the friction while turning at high speeds to heat and form the material. Flowdrills are designed with an almost flat conical tip that transitions into a sharper conical shape that leads into the cylindrical shape. The conical and cylindrical portions of the tool are polygon shaped. The cylindrical part of the tool determines the diameter of the hole.
Several styles and sizes are available to suit your Flowdrilling needs. Sizes and styles can also be customized.
|
|
|
|
|
|
Flow punch forming with centerdrill is a process in which high-strength bushes or eyelets are produced in thin-walled metals using a simple operation without cutting. Instead, friction and feed pressure are used to heat and form the material.
The flow punch forming process may be used everywhere, where threads, bushings, soldering connections or through-holes are to be produced in thin-walled metals materials (e.g. steel plates, non-ferrous metals or high-alloy steels).
Flow punch forming can be used with virtually all thin-walled metals.
The standard versions include the centerdrill short and long models. They differ only in the length of the cylindrical part; the angle of the conical part is identical. When using these versions the material displaced against the direction of feed remains on the surface of the workpart and forms a collar.
Both models are also available in the flat version, with cutters ground into the belt that remove the collar in the same operation, resulting in a smooth surface.
For further details and more information, please visit our website.
|
|
The flowdrill process is based on a combination
of thrust force and rotation speed. It allows to form
bushing into thin walled metallic materials.
All metals which can be soldered, ferrous or non
ferrous, can also be flowdrilled. Parts with a protecting
coat like chromium platimg, etc., are non suitable for
the flowdrilling.
In order to precisely control the process (thrust and
speed) it is recommended to work with the machining
unit BEA25CNC, for less demanding applications the
unit BEM20. For thread cutting or forming the tapping
unit GEM20.
|
|
Precision boring: Walter Precision DIGITAL
The new precision boring tool B 4035 with its electronic position measuring system makes no compromise in terms of accuracy.
Setting errors are avoided thanks to the ì-accurate digital display. The imbalance compensator enables high cutting data with maximum dimensional accuracy.
A wide range of models and inserts ensure a high degree of flexibility.
Prevention of set-up errors thanks to simple handling via the digital display
Low production costs because higher cutting data is possible thanks to compensated unbalance
Optimum cutting data for all material: The wide range of inserts guarantees optimum adaptation to the machining assignment
Highest part quality: Better surface finish and concentricity thanks to the compensated unbalance
The modular ScrewFit interface means flexibility and less inventory
|
|
DATRON Mini-Tools
High Speed Cutting Tools
On the basis of our testings and the experiences of our customers we develop special tools for high-speed machining.
Efficiency and quality of CNC-Machining is exceedingly determined by the technological design and the quality of the CNC-Tools. As a result of our long-term experience DATRON is able to offer tool models in the range of Mini-Tools that provide a high-quality and remarkably faster machining than any other competitive product.
|
|
Fine adjustment head:
Flexibility in fine boring
KOMET MicroKom® and KomTronic®
The technically sophisticated product series KOMET MicroKom® and KomTronic® stand out for their particular performance capability and flexibility. They therefore come up to the highest requirements in terms of precision, concentricity and replacement accuracy.
The modularity, a wide range of the latest cutting materials and high-performance coatings complete the series for all requirements in fine boring machining.
|
|
Precision boring systems with Bluetooth technology
Modern wireless networking is one of the benefits with which the new MicroKom® BluFlex™ fine adjustment head is equipped. Bluetooth is a technology developed for wirelessly networking devices over short distances. This technology has become standard for small mobile devices.
The introduction of Bluetooth in the MicroKom® BluFlex™ tool system means that the display has been disconnected from the tool head, thereby making it easier and more convenient to read off the data. When adjusting the tool system, the user can move the display to suit the conditions on site, so that it is in his field of view. A specially designed adjustment key with integral Bluetooth interface is part of the system.
With integral part balancing, the MicroKom® BluFlex™ can reach a rotational speed of up to 16,000 rpm.
The modular ABS® interface makes adjustment easier on both the spindle side and tool side.
|
|
|
|
|
|
CoroPlex™ MT
By introducing the multifunctional CoroPlex™ MT Sandvik Coromant establishes a new standard that is of outmost user benefit for operations performed with the latest of machine tool technologies.
CoroPlex MT is a combination of two winning concepts in one – CoroMill 390 and CoroTurn 107. It is either applied rotating as an effective tool for milling applications – or indexed in a number of optional positions for stationary turning using two different CoroTurn 107 inserts.
Sandvik Coromant´s multifunctional tool CoroPlex MT is designed for practically unrestricted use of all the insert positions possible without support of any extra software. Although CoroPlex MT is dedicated for Multi-Task machining it is easy to use the tool in somewhat older machines working with the software capacity limited to conventional standard cycles.
CoroPlex™ MT is an innovative multifunctional tool for finishing the workpieces in a single set-up with reduced downtime on the machine. It also completes together with CoroPlex TT twin tools, with two inserts in one holder giving the possibility to change operations momentarily, and CoroPlex SL mini-turret, with four turning tools in one, the dedicated tooling Sandvik Coromant provides Multi-Task machining.
|
|
|
A boring tool is usually a modular tool, consisting of a basic holder, adapter and a cutting unit in the form of a cartridge, slide or fine boring unit. A fine boring head holds a boring bar or cartridge. A reamer has a tool shank and a close pitch head with brazed blades. The tools, except the reamer, are radially adjustable within a specific diameter range.
|
|
|
|
