|
|
Fine Boring System
Kennametal offers Modbore and Romicron® - two world-class boring systems for your fine to rough boring requirements. Perform rough boring and precision boring operations with Modbore. Meet ultra precision requirements with Romicron®.
Romicron
For your precision boring operations.
Modbore
Twin cutting heads allow increased feed rates.
|
|
|
|
|
|
A boring tool is usually a modular tool, consisting of a basic holder, adapter and a cutting unit in the form of a cartridge, slide or fine boring unit. A fine boring head holds a boring bar or cartridge. A reamer has a tool shank and a close pitch head with brazed blades. The tools, except the reamer, are radially adjustable within a specific diameter range.
Sandvik Coromant now introduces CoroBore 820, a unique addition to its boring tool programme.
CoroBore 820 is a new solution for high productive boring preferably in roughing operations. The boring range is 35 - 260 mm and the boring depth is up to 4 x diameter. It is designed for internal coolant supply.
Three cutting edges allow a higher penetration rate with maintained tool life. A comprehensive programme of tool bodies, slides, shims and cutting inserts allow CoroBore 820 to be configured to suit the widest possible range of applications.
CoroBore 820 in combination with Duobore makes a highly productive team for rough boring from Sandvik Coromant.
|
|
BoreSTAR out-performs any other kit when it comes to range, rigidity, accuracy and repeatability.
The BoreSTART kit is fast and simple to use (no spacers or complicated set-ups) but is extremely rigid and accurate. It is dial adjustable in increments of 0.0001". Range is from .314" to 6.69" (8mm to 170mm)
|
|
Blind, stepped and through bore single pass diamond tools
Plateau superfinishing tools for bearing ratios exceeding 60%
Manually adjusted or auto – Compensation tools
Bore size from .080” to 8.00”
Single pass stock removals to .200”
Finishes as fine as .05” Micrometers (2 micro inch)
Size Control below 0.5 micron (20 millionths)
|
|
MP-X Drills
For Multi-Application drilling across a wide range of materials
CDX-Inox Drills
For Stainless Steel and exotic materials for drilling to 5 x D
CDX-DH Drill
For Deep Hole Drilling to 8 x D
|
|
Sutton Tools drills and surface coatings are manufactured in Australia and meet international standards.
Drill surface coatings are available in: Blue Finish, Bright Finish, Titanium Nitride, Titanium Carbonitride, Titanium Aluminium Nitride, and Nitriding.
These high performance coatings provide excellent toughness, resistance to wear, stress and corrosion, and present a superior work piece finish.
|
|
|
|
|
|
Sutton Tools recognises the relentless challenge facing metal working industries to produce faster and more efficiently than ever before and is pleased to provide the high performance market with the most cost efficient cutting solution with the release of it’s High Performance Range of Drills.
The comprehensive range of high performance drills now includes Cobalt and Vanadium based grades of high speed steel(HSS-Co, HSSE-V), as well as the latest developments in Powdered Metallurgy high speed steel (PM-HSS) and Carbide ranges, manufactured to DIN standards, which are complemented by TiN, TiCNite, AITiN (multi-layer) and CrN ceramic surface coatings and state of the art Vacuum Heat Treatment.
There are so many variables that affect the final outcome, and hence overall cost effectiveness of a job, that selecting the right drill can be some what of a challenge.
However the Sutton High Performance Range has simplified this task, by colour coding the tools to the material group in which it is intended for, allowing you to quickly select the most suitable tool for your job.
For more information visit our website on http://suttontools/IndustrialDrills
|
|
Dormer offer a range of solid carbide and carbide tipped reamers in several variations to meet the demands of higher productivity machining:
- NC High Speed Precision Reamers
- Machine Reamers with Extremely Unequal Spacing
- NC Centesimal Reamers for High Precision Chucks
- Expanding Machine Reamers
|
|
CHAMDRILLJET, the new evolution of CHAMDRILL, has all of the familiar CHAMDRILL advantages and in addition two coolant holes extending all of the way to the cutting edges.
The new CHAMDRILLJET also features new drill head geometries.
All of these new developments are a result of ISCAR's advanced manufacturing technology.
Drill Heads
CHAMDRILLJET features four different, standard drill head geometries designed specifically for optimal performance and
maximum reliability when used on various materials.
- IDP - For use on carbon and alloy steel (ISO P).
The drill head has a honed cutting edge.
- IDM - For use on stainless steel and high temperature
alloys (ISO M).
The drill head features a T-land on the cutting edge.
- IDK - For use on cast iron (ISO K). The drill head is designed with
a honed cutting edge and two peripheral chamfers.
- IDN - For use on aluminum (ISO N). The drill head is manufactured with a sharp cutting edge and polished flutes.
|
|
Posicut Twist Drill
- H.S.S. Ø 0.002" - .087"
- H.S.S. Ø 0.05mm - 2.20mm
- Carbide Ø 0.0039"- 0.0971"
- Carbide Ø 0.10mm - 1.45mm
- Reinforced Shank & four facet grinding.
Asycut Drill Reamer
- Solid Carbide Construction.
- Inch Ø 13/64" - 3/4"
- Metric 3mm - 20mm
- Coolant fed up to 5xØ standard.
Tricut Drill Reamer
- Solid Carbide Construction.
- Inch Ø 0.028" - 0.551"
- Metric Ø 0.70mm - 14.00mm
- Degressive helix angle to aid chip evacuation.
|
|
Standard Length Drills
- DIN 338 2 Flute 27° Helix 118° 4 Facet Point 3mm to 7mm
- DIN 338 2 Flute 27° Helix 118° 4 Facet Point 7mm to 12mm
Medium Length Drills
- 2 Flute 25° Helix 118° 4 Facet Point
- 2 Flute 25° Helix 118° 4 Facet Point
|
|
|
Designed for portable and machine drilling in a broad range of steel, ferrous and non-ferrous materials (bright finish in non-ferrous), under many different conditions. TiN coating with increased surface hardness allows for extended tool life, greater lubricity, better chip ejection, increased productivity, and lower horsepower requirements.
|
|
Solid Carbide Drills
2 Flute - 118° Four Facet Point
3 Flute - 130° High Performance Point
Cutting Edge Tolerance/Shank Tolerance +.000 - .0002
|
|
|
We supply DIN 345 DIN ANSI standard HSS taper shank twist drills with bright, milled polished, fully ground etc finish, diameter from 3mm to 100mm all metric sizes or inch sizes, also we supply extra length taper shank drills and reduced shank drills like 1/2 shank drills, 3/4 shank drills etc.
|
|
|
We can supply HSS step drills with bright, tin-coated, straight groove and spiral flute, sizes from 4-12mm to 50-90mm different steps, we use HSS M2 and HSS 9341 to produce top quality items for you. Packing in single plastic box, metal box, wooden case etc as per your requirements.
|
|
Designed to finish holes to H7 tolerance, Dormer manufacture a range of HSS and HSS-E reamers:
- Hand Reamers
- Adjustable Hand Reamers
- Hand Reamers Quickly Adjustable
- Hand Taper Reamers
- Hand Taper Pin Reamers
- Machine Reamers
- NC Reamers for High Precision Chucks
- NC Centesimal Reamers for High Precision Chucks
- Machine Centesimal Reamers
- Machine Reamers Left Hand Helix 45°
- Machine Reamers for Conical Pint Left Hand Helix 45°
- Bridge Reamers
- Shell Reamers
|
|
These high quality, easy-to-use, reamers are perfect for high performance machining and large batch production.
Optimised cutting grades and geometries offer high productivity in all types of materials. Diameter range 4-60 mm (inches: .1574-2.362).
Read more about our reaming products below:
BIFIX
Bifix is a high precision, indexable blade reamer suitable for all material groups.
PRECIFIX
Precifix is a high precision indexable blade reamer capable of IT6 tolerance. The diameter range covers 12-60 mm, and the unique clamping system design ensures stable blade clamping.
PRECIMASTER
Precimaster is a smart design, exchangeable head reamer. It's effective, accurate, modular and adjustment free.
|
|
| ... products without technical information |
| |
|
|
