|
|
|
Drum clamps are widely used in the petroleum and chemical industries and in other applications that require the handling of standard 55-gallon drums. Drum clamps can also help improve productivity by handling up to four drums per load.
|
|
|
Cascade's Wine Barrel Handler simplifies the barrel handling process. Designed to work in the "cave" or "narrow aisle" operations, the Wine Barrel Handler allows a lift truck driver to easily grab a barrel from a stack, lower it to the ground or move it to the desired location. A 180-degree swinging fork assembly mounted on a full-width traversing frame allows the driver to pick up a barrel from either the left- or the right-hand side of a narrow aisle. The Wine Barrel Handler can handle most types and sizes of wine barrels. Also included in the fork cradle design are rollers to aide in the manual spinning of the barrel for mixing.
|
|
| ... products without technical information |
| |
|
The configuration choice gives you the possibility to adapt each solution to your specific mavimentation exigencies, depending also on the paricular working cycle.
|
|
Handling large drum loads safely is no longer a problem: Our drum tongs, grippers, lifters and tilters allow both vertical and horizontal transport.
Even where space is restricted, the storage area can be flexibly loaded. Stable constructions and galvanized models ensure a long product life, which is guaranteed through our manufacturing competence.
|
|
Handling attachment with circular or properly shaped vacuum pad. Indicated for handling of metal or plastic barrels.
Vacuum generation by electric vane pump or pneumatic ejector (Venturi system).
Max capacity 35 kg.
Ergonomic handle.
Accessories: quick disconnection for suction pads, angular adaptor, flexible extended manouvre handle, etc.
|
|
Dalmec offers a range of tooling heads for handling drums, barrels, containers, pails and canisters in a “weightless’ condition.
Simple to use, they allow the operator to move the product quickly, accurately and with the utmost safety within the working area.
These manipulators offer maximum flexibility in type, design, dimensions and gripping system in order to suit the specific requirements of the user and the environmental conditions of the working area.
|
|
|
|
|
|
HANDLE YOUR PRODUCTS INTUITIVELY WITH ZE'SOLUTION SAPELEM
ECONOMICIAL
Electric energy.
Eliminate MSD.
INTUTIVE
Follow operators' nature gestures.
No bouton necessary to make movements.
No adjustment necessary to adapt mass changes.
REACTIVE
Reaction time < 0,1 s.
Acceleration up to 1 g.
Max Speed 2 m/s.
POWERFUL
From 0 until 300 kg.
Arm up to 4,7 m.
PRECISE
At Millimeter.
Arm in aluminium : Movements without resistance.
SECURE
Detector of hand presence.
Active security through embedded software.
Power-Cut Management.
ERGONOMIC
Ergo Conception : lightness, sensibility, visibility …
Design for left and right handers.
Effort to make movements < 20 grammes.
ALL PRODUCTS
Cans, boxes, bags, doors, windshields, bumpers, tanks, tubes, bottles, pallets, tyres, ham, spools, eggs, motor parts (water pump, etc.), metallic systems, windows, dashboards, sand core, equipments, moulds, parts of fuselage, yoghurt pots, exhaust system, car batteries, shower trays, sinks, sunroofs, motorbikes engines, bus windscreen, car doors, bonnets, steel cabinets, car seats, aeronautical parts …
ALL FIELDS
Food industry, aeronautics, car industry, textile, cardboard, glass, woodworking, plastic, chemistry, sheet metal, medical, warehouses, electronics, equipments, pharmacy ...
|
|
Scaglia INDEVA offers the most complete range of industrial manipulator on the market, including both traditional pneumatic manipulators and state of the art electronic manipulators, better referred to as INDEVA.
Pneumatic manipulators are ideal to handle offset loads while Indeva are ideal anywhere speed, fluid movement and exact positioning of the load are required.
|
|
|
|
|
|
Product
Vacuum-barrels: station of discharge, proportioning and rinsing of barrels and small containers
The vacuum-barrels is designed for the transfer of liquid additives (even viscous) stored out of barrels or small containers and in front of being built-in processes of formulation. It provides the functions of:
- draining of the barrel or container without wasting,
- proportioning of the product,
- rinsing of the barrel and the piping of transfer,
- recycling of the product of washing.
Applications
Industry of the lubricants and chemistry. Adapted more particularly to the cases where:
- the products to be proportioned are numerous,
- the quantities of products to be proportioned are weak (of 10 to a few hundred kilos),
- the necessary precision of proportioning is raised,
- the residual quantity must be reduced.
Strong points
- High Precision and reliability of proportioning.
- Traceability of the operations (recording of the components and connection to the management system of production of the unit).
- Inventory control (indication of the remaining quantity in the barrel).
- Safety, cleanliness and comfort of use.
- Recovery of expensive product and the barrels.
- Reintroduction of the product of washing in the formula.
- Robustness and simple maintenance.
|
|
|
|
|
|
Compared to the traditional handling devices such as hoists and pneumatic manipulators, the Intelligent Assist Devices by Scaglia Indeva provide relevant advantages:
Precise positioning of the load as they allow for accurate and rapid movements, while traditional handling devices overtravel, bounce and require lots of little corrective movements that reduce productivity.
Intuitive control: It features the “float mode” control or “hands on manipulation”, without actuating the control handle. It makes the most of the natural human ability to coordinate and control motion, thus allowing for a more intuitive control that means a more precise and quicker positioning of the load, especially when this has to be placed in a narrow target as gently as possible.
Improved ergonomics and no effort required. Thanks to the microprocessor based control, the system supplies energy to win inertia both during acceleration and braking.
Speed: IADs respond swiftly, yet smoothly to human touch; the operator notices no time lapse between the machine’s sensing and its response.
Automatic and immediate compensation to weight: it allows handling loads with different weights or loads that vary their weight during handling (emptying out containers) with no stop times at all for turning selector.
|
|
| ... products without technical information |
| |
Bushman AvonTec manufactures drum handling equipment that holds drums securely during pick up, movement, and discharge operations. Each ergonomically designed lifter permits precise rotation, from the vertical to the horizontal plane and beyond, for controlled pouring and dumping.
All Bushman AvonTec's drum handling units meet or exceed the requirements of the latest revisions of ASME Specifications B30.20 and BTH-1, Design of Below-the-Hook Lifting Devices.
Each unit has a 3 to 1 safety factor, based on the yield strength of the material. This protects the operator, drum and its contents.
The self-locking worm drive speed reducer holds the drum in position without roll-back.
In addition to the standard features described below, most Bushman AvonTec drum tilters can be modified for a variety of different drum sizes and types including those frequently used for hazardous materials.
|
|
Drum clamp LF20
Capacities :
Max load = 350 kg Gripping diameter = 420 - 700 mm
Description :
Simple 2 point clamp to lift drums vertically using the upper rim.
|
|
Stainless steel drum-lifter with front tilting system and electrical lifting
Unsurpassed functionality!
Linear-positioned gripping equipment for drums with diameters of 350 - 600 mm.
Turning system for tilting.
Hygienic, rust-free stainless steel design.
Material: stainless steel 1.4301.
Surface: glass bead-blasted.
With manual synchronous telescopic hydraulics and serial rapid lifting and soft lowering.
Serial polyamide castor rollers and polyamide load-bearing tandem rollers.
With locking brake.
Dimensions: 1210 x 1100 x 1463 mm
Manual lifting: 720 mm
With manual GBK tilting system
(high turning point approx. 1170 mm)
Weight: 267 kg
Load-bearing capacity: 350 kg
|
|
|
VacuEasylift lifts drums, tins and buckets in the pharmaceutical/chemical industries.These suction feet can be designed to move one or more objects at the same time.
|
|
| ... products without technical information |
| |
|
|
|
|
The Drum-lifter can lift, tip, mix, empty and transport drums for you with ease. It is a mobile lifting and tipping mechanism designed for 200 liter tyred drums. The Drum-lifter is driven onto the standing drum which is then clamped into the drum basket. The drum can now be raised into the required height using the hydraulic foot pump.
The drum can now be rotated to mix or tipped to empty using the handle of the worm drive gearbox. The Drum-lifter is equipped with large rubber wheels which makes for ease of transport and the rear castor wheel is fitted with a brake. The cylinders are fitted with check valves as a safety feature in case of rapid pressure loss due to hose failure. The model 1400P is fitted with a ratchet strop and is designed for steel and plastic drums between 400 and 600mm diameter. The Drum-lifter can be fitted with pneumatic drive, anti explosion protection, made from stainless steel or produced with other modifications on request.
Additional equipment is avilable:
- Pneumatic-hydraulic drive
- Anti-explosion protection
- stainless steel construction and more
|
|
Lev 600 Roto-Fut
Capacities :
Max load = 350 kg Gripping diameter = 300 - 600 mm
Description :
Designed to move, lift and turn steel or plastic drums, tipping drum contents into mixing vessels. Rotation up to 180°.
|
|
- Easy to lift,transport and tilt 55 gallon drum.
- Available to carry the drum to rack(lower than 1350mm).
- Tilt the drum 120¡ã for oil empty.
- Compact and reliable mechanism system fo fix drum.
- It can lock a drum in vertical position to avoid spills or horizontal position for draining through a faucet.
- Easily lift with pedal when unload.
|
|
|
|
