Electric motors

325 companies | 2833 products
Electric motors
  • Category
  • What’s new?
  • Type
  • Technology
  • Electrical characteristics
  • Control
  • Protection level
  • Features
  • Cooling system
  • Other characteristics
  • Product application
  • Domain
  • Application

APPLICATIONS:
Air compressors, pumps, conveyors, blowers and general industrial equipment.
FEATURES:
Double...

APPLICATIONS:
Pumps, fans, blowers or other inverter powered applications.

FEATURES:
Inverter Grade® Insulation System (Meets NEMA MG-1 Part 31)
Class F Thermostats (One Per Phase)
Rolled...

• Totally Enclosed Fan Cooled
• Energy, and Inverter Duty Types FUT, UTE, UTI
• 1.25 Service Factor
• 1/4 through 30 horsepower
3600, 1800, 1200 rpm
200, 208-230/460 & 575 volt
• Removable Feet on 182 frame and up
• ALLGUARD® Motor Quality System

U.S. Motor’s...

For use on turbine, mix flow and propeller pumps
3 - 4000 Horsepower
3600 through 514 rpm
Low and medium voltage through 6900 volts
Three phase, 60 and 50 hertz
Three efficiency levels - standard
efficient, energy efficient
and premium efficient

Product Overview
Our Weather Protected Type I (WPI)
Holloshaftâ motors are constructed...

C-FACE MOTORS
For air compressors, pumps, conveyors, blowers
and general industrial equipment.

HP – 1/4 through 60 HP
Phase – Single and Three Phase
RPM –...

{{productDetail[11602]}}
synchronous electric motor / AC - max. 0.9 VA, 12 - 240 V | M61

The M61 motor is made up of the following components:
- galvanised iron sheet stator
-...

synchronous electric motor / AC - max. 5.5 VA, 12 - 230 V | M42

The M42 motor is made up of the following components:
- galvanized iron sheet stator
-...

synchronous electric motor / AC - max. 8 VA, 24 - 230 V | M56

The M56 motor is made up of the following components:
- galvanized iron sheet...

synchronous electric motor / AC - max. 4 VA, 12 - 240 V | M51

The M51 motor is made up of the following components:
- galvanized iron sheet stator
-...

{{productDetail[11607]}}
asynchronous electric motor - 0.04 - 55 kW | EUSAS®

Integral motors
The EUSAS integral motor is part of the Watt motor system. All features and benefits have been implemented and further developed. The motor is robust,...

asynchronous electric motor - 0.04 - 200 kW

IEC standard motors
Watt standard motors adhere to the following IEC standards:


Type...

{{productDetail[12804]}}
synchronous electric motor / three-phase - 1.26 - 23.56 kW, 3.2 - 84 Nm | DS/DA series

With a shaft height from 45 to 280 Baumüller offers the largest product range of synchronous and asynchronous motors.

The servo motor for all applications with highest requirements...

synchronous electric motor / three-phase - 0.21 - 0.26 kW, 0.49 Nm | DSA series

The Baumüller 12-pole external rotor synchronous motor features a very high torque density and outstanding constant speed characteristics.

DSA external-rotor motors for applications with...

DC electric motor / disc - 16 - 147 W, 0.05 - 0.7 Nm | GDM series

The main strengths of Baumüller disc motors are that they are compact and flat. In their shortest design, only 36.5 mm of axial space is required.

GDM DC disc motors
Baumüller DC disc motors are permanent magnet motors with ironless rotors and barrel commutators, meaning that they are low in inertia and highly dynamic throughout the...

linear  electric motor / synchronous / brushless / ironless - max. 14.750 N | LS series

Baumüller linear motors have been designed for use as direct drives with synchronous motors. Customized motor concepts can be created using a modular system, meaning that Baumüller linear motors can achieve maximum thrust forces of up to 14,750 N.

Baumüller linear motors are synchronous motors. They consist...

direct current electric motor - max. 500 kW

Especially when robust, easy-to-handle electric drives are required, DC technology takes its justified place in drive systems. DC technology has numerous advantages, which benefit user-friendliness in particular.

DC drives have a linear...

{{productDetail[9305]}}
asynchronous electric motor / three-phase - 24 - 48 V, max. 8 500 rpm, 0.17 Nm | HBR 16

compact, modern, flange size down to 40mm
high resolution singleturn angle sensor
cost-efficient design
available with multiturn encoder (BISS) from size HBR 26
optional...

asynchronous electric motor / three-phase - 24 - 48 V, max. 7 000 rpm, 0.37 Nm | HBR 22

compact, modern, flange size down to 40mm
high resolution singleturn angle sensor
cost-efficient design
available with multiturn encoder (BISS) from size HBR 26
optional...

asynchronous electric motor / three-phase - 24 - 48 V, max. 5 500 rpm, 0.57 Nm | HBR 26

compact, modern, flange size down to 40mm
high resolution singleturn angle sensor
cost-efficient design
available with multiturn encoder (BISS) from size HBR 26
optional...

{{productDetail[9312]}}
asynchronous electric motor / three-phase / with liquid-cooled - 37 kW - 2 500 kW

Our range of products in these areas of competence consists of liquid-cooled three-phase induction engines/low voltage range from 37 kW to 2,500 kW, available with any standard number of poles, construction types and protection up to IP67. Our totally enclosed cooling system has proven itself a thousand...

asynchronous electric motor / three-phase / with liquid-cooled - 37 kW - 2 500 kW

Since the acquisition of ELIN EBG Motoren GmbH by the TRASYS group in 2002, new traction business is exclusively handled...

asynchronous electric motor / three-phase / with liquid-cooled - 37 kW - 2 500 kW

With their high-quality products and services, ELIN EBG Motoren have established themselves as a partner for power-supply companies all over the world. Our list of references includes customers all over Europe, e.g.,...

asynchronous electric motor / three-phase / with liquid-cooled - 37 kW - 2 500 kW

As a specialist for customer-designed solutions we are able to achieve optimised customer-specific solutions at an extremely competitive price for turbo, spiral lobe-type, piston...

asynchronous electric motor / three-phase / with liquid-cooled - 37 kW - 2 500 kW

As a specialist for customer-designed solutions we are able to achieve optimised customer-specific solutions at an extremely competitive price for turbo, spiral lobe-type, piston...

{{productDetail[13987]}}
five-phase stepper electric motor / DC - max. 85 mm | AK series

Main features

● Compact design and light weight with high accuracy, speed and...

five-phase stepper electric motor - max. 85 mm | AHK series

Main features

● Removeable the coupling connecting Ball-screw, TM-screw...

five-phase stepper electric motor / with integrated controller - 60 mm | AK-B series

Main features

● Compact design and light weight with high accuracy, speed and...

five-phase stepper electric motor / with integrated controller - 60 mm | AK-GB series

Main features

● Compact design and light weight with high accuracy, speed and torque
● Cost-effective
●...

five-phase stepper electric motor / with integrated controller - 60 mm | AK-RB series

Main features

● Compact design and light weight with high accuracy, speed and torque
● Cost-effective
●...

{{productDetail[23164]}}
linear  electric motor / brushless / synchronous / ironcore - 73 - 10 000 N | IC Series

The Ironcore motors provide the highest force per frame size. They feature a patented anti-cogging design which yields extremely smooth operation from these high force motors.

These...

synchronous electric motor / brushless / linear  / ironless - 21 - 1 600 N | IL Series

Kollmorgen PLATINUM® Direct Drive Linear (DDL) Ironless motors have no slots for the coil windings. That means a very light mass, absolutely no attractive forces between...

stepper electric motor / high-torque - 42 - 253 oz-in | POWERMAX M & P Series

Pacific Scientific POWERMAX II® P and M Series Step Motors set the standard for value...

electric motor - POWERPAC K & N Series

Pacific Scientific POWERPAC® N3, N4, K3, and K4 Series Hybrid Step Motors deliver more power in a smaller package. These rugged NEMA 34 and 42 (90 and 110 mm) frame motors...

stepper electric motor / high-torque - CT Series

CT series motors incorporate innovative cooling technology, high torque magnetic designs, rugged bearings, and high...

{{productDetail[24821]}}
permanent magnet electric motor / AC - 0.37 - 30 kW, max. 6 000 rpm | HPS series

Lafert offers a wide range of unique stand-alone Permanent Magnet Motors nominated HPS (High Performance Stand-alone). The HPS range combines the mature and well proven technology of both AC Brushless Servomotors and AC Induction Motors resulting in a cost...

synchronous electric motor / permanent magnet / with luminance adjustment - 0.37 - 30 kW | HPI series

HPI (High Performance Integrated Drive) is the Lafert range of PM Motors with integrated sensorless drive. The HPI range combines on the motor...

asynchronous electric motor / heavy-duty - 1.1 - 22 kW, 50Hz, IP55 | AMPE, AMPH series

As a leading supplier, Lafert had to front all the issues, and developed a product range to meet the increasing demand in high efficiency and energy saving products in Europe and USA after the introduction of Directives imposing minimum efficiency levels.

The induction motor is the most...

asynchronous electric motor / three-phase / heavy-duty - 0.75 - 200 kW, 60 Hz, IP55 | AMHE, AMH, AMEE series

As a leading supplier, Lafert had to front all the issues, and developed a product range to meet the increasing demand in high efficiency and energy saving products in Europe and USA after the introduction of Directives imposing minimum efficiency levels.

The induction motor is the most...

asynchronous electric motor / three-phase - 0.75 - 22 kW | AM series

These motors are not sold in the European Union and USA, are mainly sold for the export markets, where IE1 Efficiencies still acceptable.

Induction motor is the most common motor type; it accounts for the largest share...

{{productDetail[22127]}}
brushless electric motor / DC - max. 1kW

Traditionally, many motor needs have been met using brushed DC motors. These motors use the brushes...

electric motor - NEMA 10 - 34, 6 - 310 Ncm

These hybrid stepping motors rotate at fixed angles by digitally controlled electronic pulses. The hybrid stepping motors...

stepper electric motor / permanent magnet - 14.7 - 166.7 mNm | PM Series

A permanent magnet motor, sometimes called a "tin can" motor, can be...

stepper electric motor / permanent magnet - 150 - 700 mNm | PG Series

A permanent magnet motor can be the perfect solution to many motor applications. It is reliable, efficient, and long-lasting. It is a cost effective solution when not using a hybrid step motor. One problem with the permanent magnet motor, however, is getting the amount of power...

{{productDetail[20004]}}
asynchronous electric motor - 0.55 - 22 kW, 380 - 480 V

The VEMoDRIVE Compact drives are available with the same options as the conventional setup (motor and frequency frequency converter separately). For the engine these options primarily include: type of construction,...

asynchronous electric motor / for pumping applications - 0.05 - 28 000 kW, 0.23 - 10 kV | LV, HV series

The VEMoDRIVE single system offers you a drive strategy tailor-made to your application that ranges from analysis to after-sales service depending...

asynchronous electric motor - 0.06 - 132 kW, 500 - 3 000 rpm | IEC

Energy-efficient and non-polluting
these motors are designed for operation on a frequency converter
designed according to DIN EN 60034 (IEC 60072)
mounting...

asynchronous electric motor / energy-saving - 200 - 1 000 kW, 500 - 3 000 rpm

With the new energy-efficient transnorm motors, VEM has extended its low-voltage asynchronous motor range up to 1000 kW.
Features
Energy-efficient and non-polluting
these motors are designed for operation on a frequency converter
designed...

synchronous electric motor / permanent magnet - 0.09 - 75 kW, 0.6 - 860 Nm

Driving down CO2 emissions is the greatest challenge of our time. That makes reducing energy consumption the order of the day. State-of-the-art speed-controlled electrical drive systems enable us to save maximum energy. One especially energy-efficient solution is permanent-magnet synchronous motors (PM motors).
They...

{{productDetail[29583]}}
brushless electric motor / DC - 12 V, 4 W, 19 mNm | BLDC 24 P16A-12V

More power, based on the mass of this motor, is hardly possible. The BLDC...

brushless electric motor / DC - 3 V, 8 W, 17 mNm | BLDC 24 P16A-3V

The reasonably priced electronically commutated 3 phases Brushless motors (EC- motors) are particularly suitable for applications...

brushless electric motor / DC - 12 V, 8 W, 28 mNm | BLDC 24 P24A-12V

The reasonably priced electronically commutated 3 phases Brushless motors (EC- motors) are particularly suitable for applications...

brushless electric motor / DC - 12 V, 10 W, 57 mNm | BLDC 36 P16A-12V

The application area of the BLDC motor 36 is extraordinary. Whether the motor is...

brushless electric motor / DC - 24 V, 10 W, 45 mNm | BLDC 40 P10A-24V

The reasonably priced electronically commutated 3 phases Brushless motors (EC- motors) are particularly suitable for applications...

{{productDetail[67897]}}
asynchronous electric motor / electrically insulating - max. 13.8 kV, max. IP55

This is our principal field of business. We supply high voltage motors of any kind, and will ship anywhere in the world.
We stock and build high voltage motors of the squirrel cage or slip ring type, typically for nominal voltages between 3 kV and 11 kV. Custom constructions deviating from these specs are available for nominal voltages of up to...

asynchronous electric motor / electrically insulating - max. 13.8 kV, max. IP55

Any number of variations. Huge inventory always in stock.
For the technical data of our direct current shunt-wound motors of the MEBGVF standard series, see our direct-current motors catalogue.
Motors of sizes 112 to 315 mm are directly available...

asynchronous electric motor / squirrel cage / three-phase - max. IP55

ow voltage motors with standard configurations are always available from stock. Also in stock are three-phase low voltage motors, either as squirrel cage or as slip ring model. For the technical specifications of our three-phase squirrel...

{{productDetail[58477]}}
asynchronous electric motor / single-phase - 90 W, 6 - 25 Nm

New to the RUHRGETRIEBE product range
of worm drive motors: Our innitely variable single-phase asynchronous motor
with integrated controls often spares the
need for complicated and costly frequency
converter implementation.
Designed for simple engine speed regulation, this motor is not only an...

asynchronous electric motor / three-phase / with integrated inverter - max. 0.37 kW

Three-phase motors with an output of
up to 0.37 KW are now available.
The elimination of external cables results
in simplified connection, to name two of...

{{productDetail[59231]}}
asynchronous electric motor / three-phase / with integrated inverter - max. 0.37 kW

Total output becomes smaller.
The most suitable load balance of a generator can be realized.
In-ship...

{{productDetail[30043]}}
asynchronous electric motor / single-phase - 230 V, 50 Hz | SEh, SEMh series

The SEh, SEMh series from Cantoni Motor, is a single-phase asynchronous electric motor with rated voltage of 230 V, and...

asynchronous electric motor / squirrel cage / heavy-duty - 0.04 - 4 000 kW kW, IP55 | 2SIE, SEE, Sh series

The 2SIE, SEE, Sh series are manufactured by Cantoni Motor. These asynchronous squirrel cage electric motors have power ranges from 0.04 kW to 4000 kW and frame sizes between 80 mm...

asynchronous electric motor / squirrel cage / three-phase - 0.06 - 200 kW | Sh, PSh, PSg, 2Sg series

The Sh, PSH and PSG series by Cantoni Motor is a Three phase asynchronous electric motor which comes squirrel cage for a general purpose. It has an output which is designed for...

asynchronous electric motor / three-phase - 380 - 575 Vn 50 Hz, NEMA, CSA

Cantoni Motor's Three-Phase Motors follow the NEMA-EPAct 92. They are used for driving pumps, fans, compressors, and other general purpose applications in damp, dusty, or harsh environments.

The...

asynchronous electric motor / for pumping applications - 230 - 575 V, 50 - 60 Hz, NEMA, CSA

FEATURES AND BENEFITS:
- Design B and C
- High service factor up to 1.4
- TEFC construction with rigid base mounting and surface cooling fan
- Cast iron rigid frames and end brackets
- Ball bearings mechanically locked on the shaft end
- Rated output for continuous duty service
- Rated voltage 230/460V or 575V, usable at 208V
-...

{{productDetail[32165]}}
brushless electric motor / DC - 3.8 - 172 W | BR22 series

Transmotec brushless dc motors covers a large range of miniature sized motors to heavy duty models. The designs include both round and square shaped motor bodies.
All motors...

brushless electric motor / DC - 3.8 - 172 W | BR28 series

Voltage 12 or 24 VDC
Diameter 22-57 mm
Nominal...

brushless electric motor / DC - 3.8 - 172 W | BR33 series

Voltage 12 or 24 VDC
Diameter 22-57 mm
Nominal...

brushless electric motor / DC - 3.8 - 172 W | BR42 series

Voltage 12 or 24 VDC
Diameter 22-57 mm
Nominal...

brushless electric motor / DC - 3.8 - 172 W | BR57 series

Voltage 12 or 24 VDC
Diameter 22-57 mm
Nominal...

{{productDetail[80649]}}
synchronous reluctance electric motor - SR, ASR series

The synchronous reluctance motors with SR (Synchronous Reluctance) and ASR (Assisted Synchronous Reluctance) technology are electrical machines that can be used in all variable speed applications, but perform best when applied at high dynamic exploits the characteristics low inertia and adjustment (range of constant power beyond 1:5).
The water cooling, available on request,...

direct current electric motor - 0.5 - 2 700 kW | P-NP series

The P-NP Series of DC motors manufactured by SICMEMOTORI represents the state of the art of this technology. Thousands of motors are in operation around the world for many years, with satisfaction of...

direct current electric motor - max. 110 kW | ATEX

SICMEMOTORI is one of the few manufacturers in the world to offer a series of explosion-proof DC motors, duly certified and approved by CESI (Italian Experimental Electrotechnical Centre).The motors are manufactured according to CENELEC EN 50014 (General requirements for the realization...

DC electric motor / mill duty - SM-ML series

The SM-ML Series DC motors are commonly referred to as MILL motors.
They have been designed and are manufactured to meet the severe operating conditions in the steel industry.
They meet to the AISE not. 1 review in September...

direct current electric motor - 7.5 - 700 Hp | NE series

The DC motors NE series dimensionally and electrically to meet American standards NEMA.
The inch sizes make them mechanically...

{{productDetail[17816]}}
synchronous electric motor / compact - max. 1.5 kW

The hamotic varicon brand name relates to customized drive units with mounted or integrated...

asynchronous electric motor - max. 0.337 kW, IP55

hamotic cap - is the drive solution...

asynchronous electric motor - max. 1.1 kW, IP55

hamotic pro drives are the industry´s first choice. With its...

asynchronous electric motor - max. 0.37 kW, IP00

Diversity is the key with hamatic compact drives. Customer...

asynchronous electric motor / blower boat - max. 2.5 kW, IP 65

haventic cap motors are especially encapsulated. As a result, they are extremely versatile...

{{productDetail[13764]}}
stepper electric motor / integrated-drive - SM1A series

The new series consists of devices with integrated NEMA 24 (60 mm) stepper motor and a versatile drive for quick installation.
New NEMA24 size step motors with integrated...

stepper electric motor - 18 - 48 V, CANBus | SM1A Series

The fieldbus drives with integrated motor of the SM1A series with c0300 (Canopen) or c0400 (Modbus) firmware, are high-performance devices, consisting of a Full Digital drive based on the precise pwm technology embedded in the f4d2 firmware to control the sinusoidal...

stepper electric motor / integrated-drive - 24 - 100 V | SM2A series

The programmable drives with integrated motor of the SM2A series with c0499 firmware are high performance devices, consisting of a Full Digital drive based on the precise pwm technology embedded in the f4d2 firmware to control the sinusoidal current, a 50 poles...

stepper electric motor / high-torque - 0.018 - 29.4 Nm

The high construction quality and high performances of our 2 or 4 phase hybrid stepper motors have been reached by using high coercive magnetic low loss material resistant to high temperatures, in combination with a better optimization...

electric motor - 0.5 - 25 Nm

Only for the stepper motors MT23FKxx and...

{{productDetail[21996]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation