 |
 |
Electromagnetic single disc clutch without bearings E series SUCO VSE
ELEKTROMAGNETIC CLUTCH E-Type - Electromagnetic clutch without bearings When assembling, the stator body must be accurately centred on the input drive hub, otherwise the hub may rub on...
 |
 |
Electromagnetic single disc clutch without bearings E series SUCO
ELEKTROMAGNETIC CLUTCH E-Type - Electromagnetic clutch without bearings When assembling, the stator body must be accurately centred on the input drive hub, otherwise the hub may rub on...
 |
 |
Electromagnetic combined clutch-brake unit 8.5 - 160 Nm | ROBA®-takt series MAYR
ROBA-takt Stepper module for positioning and synchronising...
 |
 |
Electromagnetic combined clutch-brake unit 16 - 30 ft-lbs | C-Face WARNER ELECTRIC
Warner Electric's Packaged NEMA C-Face Clutch/Brake Module products offer clutch/brake performance in an easy-to-install package requiring no lubrication or maintenance for life. They are available in various enclosures as clutches,...
 |
 |
Electromagnetic friction clutch THOMSON® Thomson
Thomson’s electromagnetic friction clutches and brakes provide efficient, electrically switchable operation between a motor and a load. Clutches link the motor to the load by coupling two parallel shafts through the use of...
 |
 |
Electromagnetic clutch max. 4.5 Nm Clutch Parts
The micro electromagnetic clutches and brakes can be installed in any mounting position and hardly need maintenance. Depending on actual...
 |
 |
Electromagnetic clutch Chinabase Machinery (Hangzhou)
Electromagnetic Clutches are an important means of torque transmission. They are mainly used where the change of speed and feed are essential to optimize...
 |
 |
Electromagnetic single disc clutch 0.2 - 260 Nm Kendrion (Villingen) GmbH
The ACTIVE CLUTCH LINE includes DC slip-ring-free single-disc clutches, in which the action of force of an electromagnetic field (electromagnetically closing) is used to transmit the torque....
 |
  |
Electromagnetic single disc clutch 4 - 147 lb.ft (6 - 200 Nm) | TMC series OGURA
FEATURES FAST RESPONSE TM series clutches are dry type single disc units with no sliding parts. That means you can count on fast response time. NO...
 |
 |
Electromagnetic single disc clutch (KM/GM) Magnetbau-Schramme GmbH & Co. KG
Magnetbau Schramme Electromagnetic Clutches Electromagnetic clutches are magnet systems with an open magnetic circuit. When activated, they are suitable for transmitting...
 |
 |
Electromagnetic single disc clutch without bearings 5.5 - 175 N.m | CDF series CHAIN TAIL CO., LTD.
Dry clutch and driver can be used to drive and disengage machines, to transfer speeds and directions and for other application including. Packing and wrapping systems: packing machines, strapping machines, wrapping machinery. Textile machinery: fiber twister, treatment machines, weaving machines. Metal finishing...
 |
 |
Electromagnetic particle clutch and brake MAGTROL
DESCRIPTION Magtrols Convection Powder Brakes (CPB series) are ideal for applications operating in the low speed range or middleto- high torque range. Convection powder brakes provide full torque at zero...
 |
 |
Electromagnetic clutch 2.4 Nm - 320 Nm Miki Pulley Co.,Ltd.
Compatible with overall general industrial machinery and the rational design offers good...
 |
 |
Magnetic particle clutch 2 - 1 000 Nm, 40 - 12 000 W | EAT / ERAT series MEROBEL
MEROBEL's EMP-SC series are mostly dedicated to the applications where slipping speed...
 |
 |
Electromagnetic clutch ELK Selos
The shell with the flange is fast connected with the driven machine part. Together with the external multi-plates it creates the driven part of the coupling. The magnet body, in which gearing the internal multi-plates engage, creates the driving part. The internal multi-plates are covered by the layer of the friction material according to the kind of the operation (lubricated or dry), that...
 |
 |
Electromagnetic multi-disc clutch 12.5 - 10 000 Nm | EKE, ERD series STROMAG
Features Braking torque 12.5-10,000 Nm (higher on request) Wet or dry running possible with suitable friction disc combinations Outer diameter 95-560 mm Small dimensions High torques...
 |
 |
Electromagnetic combined clutch-brake unit 54 series Stephenson Gobin
SG Transmission Type 54 Modules combined clutch and brake packages are normally used in belt or chain driven applications where the rotary motion is derived from a remote location...
 |
 |
Electromagnetic combined clutch-brake unit 7.5 - 120 Nm | INTORQ 14.800 series INTORQ GmbH
Clutch-brake combinations are frequently used in switched-mode systems with synchronous drive speeds. They are very rugged and easy to maintain....
 |
 |
Electromagnetic particle clutch and brake 0.04 - 25 Nm Huco Engineering Industries
Huco Magnetic Particle Brakes & Clutches These magnetic particle clutches and brakes engage with the application of an electric current to stainless steel...
 |
 |
Electromagnetic particle clutch and brake Cleveland Motion Controls
Better torque control - Torque is proportional to the supplied current. Wider torque range - 100 to 1 torque range. Wider Speed Range - Torque is independent of rotational speed. Lower Power Consumption - Recommended Power Supply rated...
 |
 |
Electromagnetic clutch W.M. BERG
Electromagnetic clutches operate electrically and transmit torque mechanically. Generally, electromagnetic clutches are best for remote operation because there are no linkages necessary to control its engagement. Electromagnetic clutches have fast and smooth operations. Energy disperses...
 |
 |
Electromagnetic clutch magneta
magneta electromagnetic clutches and brakes transmit the torque and brake torque through dry running friction material. With DC voltage applied, the torque is transmitted...
 |
 |
Electromagnetic friction clutch EH series CLARK ELECTRIC CLUTCH
Bearing Mounted Clutches Bearing mounted field spool Clutches may be used to couple two rigidly supported in-line shafts. Since the field...
 |
 |
Electromagnetic friction clutch with flexible coupling CENTA-CP CENTA
CLUTCH PACK IN FLANGE HOUSING WITHINTEGRATED CLUTCH AND TORSIONAL COUPLING This is an engineered combination of three reliable and well tried components, designed for a Diesel engine drive whether it shall be engaged or disengaged. The CENTA-CP comprises: • The...
 |
 |
Magnetic particle clutch 0.001 - 1 000 Nm mobac
Magnetic particle brakes and clutches are of simple design. Due to their size they produce a high torque compared to for instance hysteresis brakes. They are having two rotors (inner and outer) and an air gap between these two rotors where the magnetic particles...
 |
 |
Magnetic particle clutch 24 - 90 V | C series MAGPOWR
Given the scores of variables associated with any web processing operation, the last thing you want to worry about is a clutch. Thanks to the reliability and long life of the MAGPOWR C Series Magnetic Particle Clutch, an operator can mount this...
 |
 |
Electromagnetic combined clutch-brake unit Minebea
Magnetic clutches use electric magnets produced to lock or unlock...
 |
 |
Electromagnetic friction clutch and brake Standard series Alltorq Ltd
ALLTORQ’s Industry Standard Power Applied Electromagnetic...
 |
 |
Magnetic particle clutch 130 lb.in | C Series Placid Industries
Typical applications: Adjustable...
 |
 |
Hysteresis electromagnetic clutch Magnetic Technologies
For every application determine the TORQUE, MAXIMUM RPM, and for brakes, the BENDING MOMENT. Then you can choose the correct shaft or coupling, and various accessories. All important internal clearances are...
