|
|
Electronic-digital position indicators proviede flexible, electronic capture of measured values and semi-automatic adjustment control at axels.
Benefits:
- Spindle pitch, direction of rotation and decimal point can be freely programmed
- Length or angle indication
- Incremental measurement function or offset input
- Zero setting of the shaft is performed at the touch of a button
|
|
Excellent readability, ergonomic handling and smart use: SIKO’s electronic displays are the instruments of choice wherever clear signals from measurement encoders are to be displayed in digital form and combined with logical functions.
All displays are equipped with scaleable intelligence. They allow monitoring of up to three measurement processes at the same time. Information is displayed on a single compact device – regardless of the type and combination of the sensors or encoders connected.
|
|
|
|
|
|
The LHL, LHI meets or exceeds factory Mutual (FM) Approval Standard temperature Limit Switches Class 3545.
They are designed to automatically shut down a process when the measured value exceeds a pre-programmed value.
Alarm masking:
Puts the alarms in the stand by condition (mask) during instrument power up or masks a deviation or band alarm if the alarm condition is a
result of a set point change. In both situations the instrument maintains the alarm masking for the duration of the alarm condition.
Logic input:
These instruments are equipped with a logic input used to acknowledge an alarm condition by an external contact.
Maximum and/or minimum data hold:
The LHI is able to memorize the maximum and the minimum measured value. This function is automatically enabled at instrument power up
and it is always active.
Power supply failure indication:
These instruments are able to signal if a power failure occurs during normal instrument operation.
Power fail recovery settings are user configurable.
|
|
|
|
|
|
HGX-1000 Weighing Indicator
With its privileged aluminium frame and included 3 digital inputs / 2 relay outputs feature,ability to communicate with PC and PLC systems HGX-1000 is a high precision digital indicator,which can be utilized in packing,dosing,tank weighing,silo weighing, etc.
Technical specifications
• Easy to read with 20 mm 5 digit 7 segment display
• High accuracy ,high speed
• 3 internal relay outputs
• 3 internal digital inputs
• Automatic or manual zeroing
• Counter option
• 20 Recipes / 6 processes
• Full, Empty and I/O indication LEDs
• Calibration via keypad
• RS232 serial output
• Power down data protection
• Adjustable digital signal filtering
• Full scale zeroing
FSM-2 Weighing Indicator
With its privileged aluminium frame,FSM-2 is commonly used in various weighing applications such as bench scales,silo and tank weighing weighing platforms.
HGX-2000 Weighing Indicator
HGX-2000 Digital weight indicator/control terminal is designed to perform complete automated solition for various weighing application. 2x20LCD character & 6-digit LED Display facilitate utilization of the product. Due to its modular infrastructure, it compensa tes requirements for PLC, PC and Operation Panel applications.
FSM-2 Exproof Weighing Indicator
Ex proof certified packaging box provided for the protection of product in chemical & petroleum industred , encompassing explosion risk.Technical specifications are similar to FSM/2.
FSM-2 S Weighing Indicator
With its privileged stainless steel box to be protected fromdust and water, FSM-2 is commonly used in various weighingappliances such as platform scales,silo and tank weighing etc.
|
|
DPM 942
- 3½ Digit LCD Meter
- 4-20mA to read 0 to 1000
- Loop Powered
- Screw Terminal Connections
- Bezel Mounted Module
The DPM 942 is a 3? digit LCD 4-20mA loop powered meter with 19mm (0.75") digit height. Connection to the meter is via screw terminals. The meter can be panel mounted using the bezel. An optional IP67 / NEMA 4X bezel (BEZ 900-IP) is available for waterproof applications. This is a popular part, normally stocked in high quantity and suitable for new designs.
|
|
For the display of process data, Fuji electric offers a complete line of digital panel meters for all application.
A lot of functions or options (72x36mm or 48x96mm formats - current, voltage, thermocouple, RTD, frequency or pulses - Alarm and re-transmission output...) are available and allow to adapt to all applications.
|
|
COMPACT ELECTRONIC DISPLAY UNIT
Quick Read family is made up of three slim, compact versions, each complete with analog and digital displays, and easily programmed via local keypad.
The 3-colour (green, yellow and red) analog display and 8-digit alphanumeric display provide clear definition and easy reading of the measurement results.
|
|
|
A comprehensive range of high accuracy multi function digital metering systems offering measurement, display and communication of over 100 parameters, including true RMS measurement for total harmonic distortion and power quality data. Integra products are fully programmable via a simple menu driven interface and can be integrated into energy management systems via various communication protocols. To suit requirements, Integra offers pulsed, analogue and digital output options, and a choice of DIN, ANSI and JIS case styles, with high quality LED or LCD display.
|
|
|
When your application calls for variable indication, Digital Panel Meters (DPM) are the right tool. Voltage, current, pressure, volume, temperature, frequency and other parameters can be monitored and displayed. With a variety of input and ouput options, DPMs can be used in most any application and the product's short depth makes it flexible and accommodating to panelbuilders' needs.
|
|
Battery Discharge Display
The PowerGauge™ is a comprehensive range of Battery Discharge Indicators that can improve the productivity of your vehicle and minimize the potential for damage from operating outside the batteries optimum parameters.
All the PowerGauge™ products are micro-processor based with no moving parts, for improved reliability, The super bright 10-segment LED bar graph gives instant battery state of charge feedback under all light conditions.
|
|
Features
- 0.2INCH DIGIT HEIGHT.
- LOW CURRENT OPERATION.
- EXCELLENT CHARACTER APPEARANCE.
- I.C. COMPATIBLE MECHANICALLY RUGGED.
- GRAY FACE,WHITE SEGMENT.
- PACKAGE : 650PCS / REEL.
- MOISTURE SENSITIVITY LEVEL : LEVEL 4.
- RoHS COMPLIANT.
Description
The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode.
|
|
|
|
|
|
HGX-1000 Weighing Indicator
With its privileged aluminium frame and included 3 digital inputs / 2 relay outputs feature,ability to communicate with PC and PLC systems HGX-1000 is a high precision digital indicator,which can be utilized in packing,dosing,tank weighing,silo weighing, etc.
Technical specifications
• Easy to read with 20 mm 5 digit 7 segment display
• High accuracy ,high speed
• 3 internal relay outputs
• 3 internal digital inputs
• Automatic or manual zeroing
• Counter option
• 20 Recipes / 6 processes
• Full, Empty and I/O indication LEDs
• Calibration via keypad
• RS232 serial output
• Power down data protection
• Adjustable digital signal filtering
• Full scale zeroing
FSM-2 Weighing Indicator
With its privileged aluminium frame,FSM-2 is commonly used in various weighing applications such as bench scales,silo and tank weighing weighing platforms.
HGX-2000 Weighing Indicator
HGX-2000 Digital weight indicator/control terminal is designed to perform complete automated solition for various weighing application. 2x20LCD character & 6-digit LED Display facilitate utilization of the product. Due to its modular infrastructure, it compensa tes requirements for PLC, PC and Operation Panel applications.
FSM-2 Exproof Weighing Indicator
Ex proof certified packaging box provided for the protection of product in chemical & petroleum industred , encompassing explosion risk.Technical specifications are similar to FSM/2.
FSM-2 S Weighing Indicator
With its privileged stainless steel box to be protected fromdust and water, FSM-2 is commonly used in various weighingappliances such as platform scales,silo and tank weighing etc.
|
|
Z57
- Easy handling
- External set/reset/inhibit inputs
- Digital brightness control
- Extensive programmable output performance
- Potential free output relays (changeovers)
|
|
|
Flow products are used in a variety of applications where liquid or gas flow needs to be monitored or controlled. In many processes, both the total quantity of product being produced and the rate at which the product is being produced must be known; flow controllers can offer that information while monitoring your process efficiency.
|
|
Close tolerance screen and stencil printing is usually associated with smaller-format substrates and print areas such as used in micro-electronics. In recent times, however, there is a growing need for larger-format applications as used in the medical, solar, display, and flexible electronic circuitry fields.
MTS® Series printers allow better process stability for large areas--in all axes, and with superior results based on your screen making capabilities. Preco’s X-Y-theta camera registration can be equipped with a variety of fiducial recognition techniques, to provide unique repeatable accuracy for all formats.
|
|
AUREL Full Automatic Printing line for Cermet potentiometers
Features
• Loading from stack magazine
• Belt transport
• Screen Printer
• Collocator with gripper-head
• Drying furnace
|
|
|
|
|
|
AUREL C2025TL High precision Screen printer
Description
The AUREL Mod. C2025TL is a high precision screen printer for very large areas up to 700x600 mm.
Special table for vacuum hold down of foils and for holes metallization.
Options
• Vacuum table for thin foils hold down
• Holes metallization or holes filling
• Cross Flow head
• Clima controll
• Special automatic handling system
• Proguide vision system
• Automatic stencil cleaning
Technical Features
• Double squeegee head for the use of metal squeegees or rubber squeegees.
• Squeegee drive actuator with DC servomotor and very smooth movement of the printing head.
• Printing mode: Contact, Off Contact, Single Print, Double Print, Print & Flood, Delay after Print.
• High precision and repeatability gor fine pitch printing.
• Motorized squeegee with programmable printing pressure and down-stop.
• X-Y-q adjustment by centesimal micrometers, on the shuttle table.
• Motorized and programmable screen lift movement (Z axis) for the function "slow snap-off" very important on fine line printing.
• PC control with menu programming printing parameters, diagnostic, timer adjustment for delay after print, data storage.
• Screen holder and printing head lift for easy set up and cleaning.
|
|
High-speed printing with superb accuracy :
Printing accuracy of less than 20 µm
Printing cycle time 7.0 seconds + printing time
2-camera automatic calibration
Easy operation
Within 2 minutes production changeover
Small footprint of 1,1 x 1,285 m
|
|
AUREL VS1520A Screen-stencil printer
AUREL VS1520A Screen-stencil printer for high quality fine-line and fine-pitch printing on Ceramic substrates, LTCC, PWB, WAFERS, GLASS, METAL
Description
The series VS screen-stencil printer uses highly advanced mechanical and electronical solutions to guarantee superior quality in fine-line and fine-pitch printing on Ceramic substrates, LTCC, PWB, WAFERS, GLASS, METAL etc.
The Automatic Vision System ensures resolutions better than 2 microns. All the machine's movements are motorized and programmed by a user friendly menu.
|
|
|
|
|
|
Function
Large board dimensions, different conveyor modes tor different throughput rates and a new high-speed inspection function - these
are the key product features of the X6. Printing tables with different designs tor different versions allow solder paste printing on partly assembled circuit boards (i.e. components mounted on the opposite side) with formats ot up to 610 x 550 mm. The choice
of the right circuit-board conveying system is determined by the required throughput rate. The single-track system conveys the
circuit-board safely through the printer and requires a handling time of only 12 seconds.
The single-conveyor HSP version with its tripartite conveyor belt shortens this handling time to less than 7 seconds.
The new high-end version of the EKRA 2 1/2-D postprint inspection delivers several images from up to 4 inspection stations every
second, thanks to the use of the latest linear engine drive technology. The use of a larger camera sensor increases the field
of view to 20 x 16 mm without any loss in resolution, ensuring that the 2 1/2-D postprint inspection system delivers consistently better results than the so-called line-scanner solutions and allowing
a thorough analysis of the solder paste printing quality on the basis ot its images.
Standard version with adjustable squeegee pressure and as a VIP head with weight compensation and fine-tuning for the squeegee
power. The automatic stencil-cleaning function also features in the basic version.
|
|
Panasonic's SP18 high speed screen printing machine is the ultimate solution for lean SMT manufacturing. Our original uni-floating printing method reliably delivers the right amount of solder in the right form - with high-speed snap-off and reduced solder waste.
The SP18's intuitive interface enables the operator to set parameters based on production requirements - making print condition adjustments nearly automatic. Automatic batch teaching of the board and recognition mark functionality further enhance its appeal.
Quick changeover, compatibility with industry standard stencils, and optimal efficiencies will increase your profits and increase your accuracy to world-class levels.
Features & Benefits
Economical solution for lean manufacturing
Intuitive interface - set parameters based on production requirements
Compatible with industry standard stencils
Customizable operator screens support user authority
Quick changeover ensure continual production
Efficient, small footprint
|
|
Close tolerance screen and stencil printing is usually associated with smaller-format substrates and print areas such as used in micro-electronics. In recent times, however, there is a growing need for larger-format applications as used in the medical, solar, display, and flexible electronic circuitry fields.
MTS® Series printers allow better process stability for large areas--in all axes, and with superior results based on your screen making capabilities. Preco’s X-Y-theta camera registration can be equipped with a variety of fiducial recognition techniques, to provide unique repeatable accuracy for all formats.
|
|
High-speed printing with superb accuracy :
Printing accuracy of less than 20 µm
Printing cycle time 7.0 seconds + printing time
2-camera automatic calibration
Easy operation
Within 2 minutes production changeover
Small footprint of 1,1 x 1,285 m
|
|
AUREL VS1520A Screen-stencil printer
AUREL VS1520A Screen-stencil printer for high quality fine-line and fine-pitch printing on Ceramic substrates, LTCC, PWB, WAFERS, GLASS, METAL
Description
The series VS screen-stencil printer uses highly advanced mechanical and electronical solutions to guarantee superior quality in fine-line and fine-pitch printing on Ceramic substrates, LTCC, PWB, WAFERS, GLASS, METAL etc.
The Automatic Vision System ensures resolutions better than 2 microns. All the machine's movements are motorized and programmed by a user friendly menu.
|
|
|
|
|
|
Function
Large board dimensions, different conveyor modes tor different throughput rates and a new high-speed inspection function - these
are the key product features of the X6. Printing tables with different designs tor different versions allow solder paste printing on partly assembled circuit boards (i.e. components mounted on the opposite side) with formats ot up to 610 x 550 mm. The choice
of the right circuit-board conveying system is determined by the required throughput rate. The single-track system conveys the
circuit-board safely through the printer and requires a handling time of only 12 seconds.
The single-conveyor HSP version with its tripartite conveyor belt shortens this handling time to less than 7 seconds.
The new high-end version of the EKRA 2 1/2-D postprint inspection delivers several images from up to 4 inspection stations every
second, thanks to the use of the latest linear engine drive technology. The use of a larger camera sensor increases the field
of view to 20 x 16 mm without any loss in resolution, ensuring that the 2 1/2-D postprint inspection system delivers consistently better results than the so-called line-scanner solutions and allowing
a thorough analysis of the solder paste printing quality on the basis ot its images.
Standard version with adjustable squeegee pressure and as a VIP head with weight compensation and fine-tuning for the squeegee
power. The automatic stencil-cleaning function also features in the basic version.
|
|
EM20-FPSI 1010
- Red/Green SMART Indicator
- 0 to 30Vd.c. Range
- 2 User Prog. Thresholds
- 1 Control Output
- IP67/NEMA 4X Metal Bezel
The EM20-FPSI 1010 is a ready-to-use panel mounted SMART indicator. This compact LED module indicates green when the input voltage is between two easily programmable levels and red when the input voltage is higher or lower. The levels are easily set and stored in Flash memory. They can be changed as often as desired. This unit can be used in countless applications where a GO / NO GO indicator is required. The module incorporates one output, allowing the user to drive an external alarm or to control the process being monitored. The module uses a metal bezel providing IP67/NEMA 4X protection and screw terminal connectors for easy installation. A 20.5mm (0.81?) diameter panel cut-out is required to mount the unit. For a list of compatible sensors click here. This is a popular part, normally stocked in high quantity and suitable for new designs.
|
|
|
|
see the results for the following category : 
