Fabrics

212 companies | 722 industrial products

Companies per page

1 products DIXON EUROPE
DIXON EUROPE 38 - 169 mm, 10 bar | A210
Textile braided suction rubber hose 38 - 169 mm, 10 bar | A210 DIXON EUROPE

Application: General heavy-duty suction and discharge of water and mild water borne slurries. Commonly used on centrifugal and diaphragm pumps throughout a wide...

1 products ELAFLEX
ELAFLEX PAL
Textile-braided electrically-conductive hose PAL ELAFLEX

The PAL range of hoses, manufactured by ContiTech, stand for reliability, security and long service life. The hose covers are resistant to abrasion, ozone and UV and electrically conductive (elastomer...

NANJING DAHUA SPECIAL BELT KNIT CO.,LTD RTC -claw hook lashing syster straps
Textile lifting sling and lashing equipment RTC -claw hook lashing syster straps NANJING DAHUA SPECIAL BELT KNIT CO.,LTD

Material: Polyester Nylon Manufactured to EN 12195-2 AS/NZS 4380 ASME B30.9 Working length: As...

NANJING DAHUA SPECIAL BELT KNIT CO.,LTD RTF series
Textile lifting sling and lashing equipment RTF series NANJING DAHUA SPECIAL BELT KNIT CO.,LTD

Ratchet lashing with double J hook : Size : RTD50-250 * 9m D ---- Double J hook width---...

NANJING DAHUA SPECIAL BELT KNIT CO.,LTD RTS series
Textile lifting sling and lashing equipment RTS series NANJING DAHUA SPECIAL BELT KNIT CO.,LTD

Ratchet lashing with S hook : size: RTS25-040 *5m S --- S hook width--- 25mm LC ---...

LC Printing Machine Factory Limited RSP-404
Textile screen printing machine RSP-404 LC Printing Machine Factory Limited

Manual Rotating Screen Printer Parameters Foundation Size: 36"x36"x23"-32.5" (92cmx92cmx59cm-83cm) Max frame size capacity: inner size 16"x20"(40cmx50cm) Machine Size: 75"x75" (190x190cm) Pallet Size:...

LC Printing Machine Factory Limited RSP-01-M
Textile and paper screen printing machine RSP-01-M LC Printing Machine Factory Limited

1 Color Micro-Adjustable Screen Printing Machine This equipment includes the main printing device and three platens with different sizes. Main Features This equipment includes the main printing device...

LC Printing Machine Factory Limited RSP-A130
Automatic textile screen printing machine RSP-A130 LC Printing Machine Factory Limited

High Speed T Shirt Tagless Screen Printing Machine Model RSP-A130 Technical Data: Max.Printing Area:130*100mm Max.Printing Speed:2000pcs/hr Rated power :3200 W Rated voltage :AC 110V/220V+10% 50/60Hz Rated...

Osborn International MEK
Abrasive cloth MEK Osborn International

Main areas of application: Finishing flat...

Osborn International
Abrasive cloth Osborn International

Main areas of application: Polishing...

Osborn International LM
Abrasive cloth LM Osborn International

Main areas of application:...

Osborn International EKK
Abrasive cloth EKK Osborn International

Main areas of application: Polishing cutlery and flatware Internal polishing of...

video S.M.R.E. Engineering S.p.A. SM-320-TA XXL
CNC cutting machine SM-320-TA XXL S.M.R.E. Engineering S.p.A.

SM-320-TA XXL Heavy duty cutting plotter for flexible PVC SM-320-TA XXL is an extremely powerful multiple tool conveyor plotter for the continuous cutting of technical fabrics, in particular...

video S.M.R.E. Engineering S.p.A. SM-320-TA
CNC cutting machine SM-320-TA S.M.R.E. Engineering S.p.A.

SM-320-TA Plotter with revolutionary fabric transportation system and multiple layer conveyor belt SM-320-TA is an extremely powerful multiple tool conveyor plotter for the continuous cutting...

video S.M.R.E. Engineering S.p.A. SM-375-TA
CNC cutting machine SM-375-TA S.M.R.E. Engineering S.p.A.

SM-375-TA Plotter da taglio multi utensile con superficie statica per tessuti tecnici SM-375-TA è una macchina industriale disegnata per linstallazione di molteplici utensili per il taglio e la...

video S.M.R.E. Engineering S.p.A. SM-370-TA
CNC cutting machine SM-370-TA S.M.R.E. Engineering S.p.A.

SM-370-TA Multiple tool static bed cutting plotter for technical fabrics and semi-rigid materials SM-370-TA is a high performance industrial cutting plotter...

video S.M.R.E. Engineering S.p.A. SM-321-SV
Automatic cutting machine SM-321-SV S.M.R.E. Engineering S.p.A.

SM-321-SV Automated unwinding, marking, length slicing and cross cutting station SM-321-SV is a truly revolutionary solution that integrates X/Y marking, length slicing and cross...

S.M.R.E. Engineering S.p.A. SM-325-TA
CNC cutting machine SM-325-TA S.M.R.E. Engineering S.p.A.

SM-325-TA Compact conveyor plotter with multiple layer belt for XXL patterns SM-325-TA is an powerful multiple tool conveyor plotter for the continuous cutting of industrial textiles with an indestructible,...

Gerber Technology Gerber Paragon
Cutting machine Gerber Paragon Gerber Technology

Gerber has engineered decades of cutting knowledge and experience into Paragon®. Its intelligent engineering and intuitive interface...

Gerber Technology GERBERcutter GTxL
Cutting machine GERBERcutter GTxL Gerber Technology

Cuts materials at compressed fabric height up to 2.5 cm (1...

Gerber Technology GERBERcutter XLc7000
Automatic cutting machine GERBERcutter XLc7000 Gerber Technology

The XLc7000 cuts a variety of materials up to two meters (79 in) wide at compressed fabric heights up to 7.2 cm (2.83 in). The...

Gerber Technology GERBERcutter® Z7
Automatic high-speed textile cutting machine GERBERcutter® Z7 Gerber Technology

The GERBERcutter® Z7 is a feature-rich high-ply cutting system that combines precision with speed to cut...

Gerber Technology 125 - 250 kg | XLs125, Synchron 101
Cloth spreading machine 125 - 250 kg | XLs125, Synchron 101 Gerber Technology

The GERBERspreader™ XLs is an affordable automated...

Gerber Technology GERBERspreader 250s
Cloth spreading machine GERBERspreader 250s Gerber Technology

The GERBERspreader™ 250s is a heavy-duty spreading system for material...

23 products SODIFA ESCA
Cera Engineering Cera 300
Textile cutting machine Cera 300 Cera Engineering

Process Single strap machine to automaically: Feed the hook or the eye strap Weld the re-inforcement Cold cut and sonic weld of the pieces or...

Comatex Textile Machinery ISRP
Tensionless inspection machine with platform ISRP Comatex Textile Machinery

The inspection, winding tensionless machine ISR 07’ TENSIONLESS, provided of axial or tangential unwinding for big rolls, it’, an excellent machine...

Comatex Textile Machinery ISR 220
Tensionless inspection machine ISR 220 Comatex Textile Machinery

Provided of axial or tangential unwinding for big rolls, it’, an excellent machine for the elastomer fabrics. The fabric gently comes...

Comatex Textile Machinery ISN 240
Continuous inspection machine ISN 240 Comatex Textile Machinery

ISN NO STOP, allows a check of the fabric quality;this machine can be interfaced with the exit of...

Comatex Textile Machinery ISP 180
Inspection machine with platform ISP 180 Comatex Textile Machinery

Allows a check of the fabric quality. Tanks at the linear geometry of the drawing, to the sensitive system of synchronization and the motorization of all the rolls of delay...

Comatex Textile Machinery ISD 220
Front and rear inspection machine for open and tubular ISD 220 Comatex Textile Machinery

- ø500 mm diameter knitted fabric rolls. - double inclinded inspection screen is covered whit special cabin, illuminated from 4 different points. -...

Comatex Textile Machinery AR Series 08
Winding machine for sampling AR Series 08 Comatex Textile Machinery

AR series, are been projected and studied for the winding and the quality inspection of the...

4 products eurolaser GmbH
video eurolaser GmbH 2 270 x 3 200 mm | XL-3200
CO2 laser textile cutting and engraving machine 2 270 x 3 200 mm | XL-3200 eurolaser GmbH

The laser machine Laser Cutting Center XL-3200 evolution. With a total processing area of 89.4" x 126" (2 270 x 3 200 mm) textiles with widths of up to 100" can be processed from the roll. Smooth stepless...

video eurolaser GmbH 2 740 mm x 3 200 mm | 2XL-3200
Textile CO2 laser cutting machine 2 740 mm x 3 200 mm | 2XL-3200 eurolaser GmbH

The laser cutting system 2XL-3200 is one of the biggest systems in the eurolaser series. With this system eurolaser offers you the possibility of processing an area measuring 107.9" x 126" (2 740 x 3...

video eurolaser GmbH 3 210 mm x 3 200 mm | 3XL-3200
Large format CO2 laser textile cutting machine 3 210 mm x 3 200 mm | 3XL-3200 eurolaser GmbH

The laser cutting system 3XL-3200 is the giant of the eurolaser systems. With a total processing area of 126.4" x 126" (3 210 mm x 3 200 mm) textiles with widths of up to 137" can be processed from the...

video eurolaser GmbH
Textile CO2 laser cutting machine eurolaser GmbH

The demand for laser processing of woven, non-woven and synthetic materials in growing continuously. Textiles can now be processed in widths up to 3,200 mm straight off the roll thanks to a new laser...

RAM Elettronica S.p.A. BF SF
CNC cutting machine BF SF RAM Elettronica S.p.A.

THE ULTIMATE EXPENSE CUTTER Suitable for cutting of: Low and medium density soft...

RAM Elettronica S.p.A. CWR
CNC cutting machine CWR RAM Elettronica S.p.A.

CONVEYOR TABLE AUTOMATIC CUTTING SYSTEM Suitable for cutting of: Resinated...

STENFLEX Rudolf Stender GmbH DN 80 - 5 000, PN 0.2 - 4
Pipe expansion joint DN 80 - 5 000, PN 0.2 - 4 STENFLEX Rudolf Stender GmbH

STENFLEX® fabric expansion joints remain stable under pressure with gaseous media at high temperatures. STENFLEX® fabric expansion joints are chemically resistant to acid or alkaline gases and remain...

Acústica Integral 14 mm | Acustiwall®
Wall-mounting polyurethane acoustic cloth 14 mm | Acustiwall® Acústica Integral

Acustiwall is a composite material combining functionality and aesthetics. It is made of an open...

Diesse Rubber Hoses S.p.A. DS6
Textile braided rubber hydraulic hose DS6 Diesse Rubber Hoses S.p.A.

Low pressure hose for hydraulic applications. Suitable...

Diesse Rubber Hoses S.p.A. DS4
Textile braided suction rubber hose DS4 Diesse Rubber Hoses S.p.A.

Low pressure suction and delivery hose for hydraulic applications....

Diesse Rubber Hoses S.p.A. DS3
Textile braided rubber hydraulic hose DS3 Diesse Rubber Hoses S.p.A.

Medium pressure hose for hydraulic applications....

Diesse Rubber Hoses S.p.A. DS-1TE
Textile braided rubber hydraulic hose DS-1TE Diesse Rubber Hoses S.p.A.

Low pressure hose for hydraulic applications. Suitable...

Diesse Rubber Hoses S.p.A. DS-2TE
Textile braided rubber hydraulic hose DS-2TE Diesse Rubber Hoses S.p.A.

Medium pressure hose for hydraulic applications....

Diesse Rubber Hoses S.p.A. DS-3TE
Textile braided rubber hydraulic hose DS-3TE Diesse Rubber Hoses S.p.A.

Medium pressure hose for hydraulic applications....

1 products Eurofim
Eurofim max. 34 000 kg
Flexible silo max. 34 000 kg Eurofim

The HIGH TOUGHNESS TREVIRA SILOSAC is widely employed for storing raw materials in powder or granules in several fields like Chemical and Pharmaceutical Industry, Plastics & Rubber, Food, Confectionary...

1 products FDM GmbH
FDM GmbH 1 - 80 m³
Flexible silo 1 - 80 m³ FDM GmbH

Advantages of flexible indoor silos: special sizes possible made to building dimensions optimum space management due to flexible design low-priced and long-lasting...

B & B Impianti s.n.c. 5 - 100 m³ | SPT - SET series
Flexible silo 5 - 100 m³ | SPT - SET series B & B Impianti s.n.c.

Technical specifications: extremely resistant trevira fabric; natural product aeration; reticular structure in galvanized...

3 products A UNO TEC
video A UNO TEC
Automatic cutting machine A UNO TEC

System designed for: Cut at fabric size Fabric taping Suitable for the production of: Surgical drapes and set(used in:General Surgery,Orthopedic,Urology, Gynecology,Chest,vascular and Hemodynamic Surgery,Otolaryngologist,...

A UNO TEC
CNC cutting machine A UNO TEC

Equipment suitable for the cutting of materials and fabrics from roll, papers and sheets of rigid and semi-rigid material, containers and filtering areas for medical and pharmaceutical use. System designed...

A UNO TEC P17
Ultrasonic textile cutting machine P17 A UNO TEC

Cutting linear and ultrasound desk whose dimensional and perpendicular accuracy makes it a tool suitable to cut acrylic or coated sheets used to produce awnings. Extremely strength machine and an easy...

1 2 3 4 5 6 7 8 9 10
Filter by :
Refine the search
Fabrics
Extend the search
Search by manufacturer
Search by catalog
Associated Terms

cloths, textiles, weaves, industrial fabrics

With DirectIndustry you can find a nearby distributor, contact a manufacturer for an estimate or a price, or examine product characteristics and specifications.