Fans

Air flow: 500 m³/h - 965 m³/h

The new generation of roof-mounted fans is one system for all sizes: only one mounting cut-out is needed for all output categories. Air routing with minimal pressure losses ensures a high level of efficiency, while an ...

Air flow: 320 m³/h
Rotational speed: 2,245 rpm
Noise level: 52 dB

2 U tangential fan with up to 320 m3/h air throughput. The minimal noise generation of 52 dB makes it suitable for use in office environments.

Air flow: 0.45 m³/h - 3 m³/h
Noise level: 28 dB - 46 dB

Axial fan for AC power supply MU Series Features - Large air flow - High static pressure Size: 80x80x25 - 140x140x28 mm Max. Air flow: 0,45 - 3,0 m³/min Max. Static pressure: 29 - 81 Pa Noise level: 28 - 46 dB(A)

Air flow: 0.18 m³/min - 6 m³/min
Diameter: 42 mm - 172 mm
Rotational speed: 2,100 rpm - 10,000 rpm

Axial fan for DC power supply MD Series Features - High airflow - Versions with standstill/speed drop alarm - Long life versions Size: 42x42x10 - 140x140x51 mm Max. Air flow: 0.13 - 6.0 m³/min Max. Static ...

Air flow: 0 ft³/min - 28.04 ft³/min

... developed and manufactured BLDC fans and blower series with the advantages of ultra-thin, ultra-silence, long lifespan and wide working temperature range. In addition, Cubic provides full-dimension and high-performance ...

Air flow: 0 ft³/min - 0.62 ft³/min

... developed and manufactured BLDC fans and blower series with the advantages of ultra-thin, ultra-silence, long lifespan and wide working temperature range. In addition, Cubic provides full-dimension and high-performance ...

... of Single, Double, and Triple Axial Fans with Easy One-step Mounting The Box Fan is a built-in cooling fan in control panel and as a device with an axial fan mounted ...

Air flow: 14,900 m³/min
Diameter: 7,300 mm
Rotational speed: 10 rpm - 50 rpm

... connection ring to protect the root plug-in, so part will fall off. The above list are for worst accidents, the design of the fan are ultra-high safety deign, the users can rest assured to use. High Efficiency Adopts ...

... negative pressure plenum or air recirculation operation can be implemented using filter fan units. Alongside their use in supplying larger cleanrooms, filter fan units can also be used to implement cleanroom ...

Air flow: 50 m³/h - 200 m³/h
Noise level: 35 dB

... power 19W • Amperage 0,08A • Frequency 50/60Hz • Dimensions (LxWxH) 12 x 12 x 3,9 cm • Standards CE certified • with fan grille and 4x screws

Air flow: 101.9 m³/h - 574.2 m³/h
Diameter: 508, 609.6 mm
Rotational speed: 2,080 rpm - 3,138 rpm

This four-bladed vaneaxial fan is called a Jet Fan because a highvelocity jet of compressed air is ejected from the trailing edge of the blade, as shown in the diagram. This results in the forward rotation ...

Air flow: 381 m³/h - 64,825 m³/h

... casing is removed, it can be used as a free fan. It can also be installed in series at intervals in longer exhaust pipes to increase the wind pressure in the pipes. The BT35-11 explosion-proof axial flow fan ...

Air flow: 0 m³/s - 4.33 m³/s
Diameter: 500 mm
Noise level: 90 dB - 101 dB

Built- in pneumatic fan with increased conveying volume and a volume flow of more than 4 m³/ sec. Earthing required. Energy source: Pneumatic Operating pressure: 4 bar Nominal diameter: 500 mm

Air flow: 0 m³/s - 5.83 m³/s
Diameter: 600 mm
Noise level: 86 dB - 97 dB

Our most powerful stationary pneumatic fan with a volume flow of more than 5 m³/ sec. Earthing required. Energy source: Pneumatic Operating pressure: 4 bar Nominal diameter: 600 mm

Air flow: 0 m³/s - 0.57 m³/s
Diameter: 300 mm
Rotational speed: 2,500 rpm

Mobile pneumatic axial fan with 300 mm nominal diameter for various ventilation work. With ATEX-Approval. Earting required.

Wall-mounted helical extractors. With ATEX certificate and Ex d motor. Cast aluminum propeller. • Engine-propeller air direction. • Explosion-proof cable gland included. • Sheet steel support frame, with aluminum strip in the ...

• Cast aluminum propeller. • Engine-propeller air direction. • Explosion-proof cable gland included. • Sheet steel suction ring with aluminum strip on the propeller area according to standard EN-1486 • Operating temperature: -20 ...

Wall-mounted helicoidal extractors. With ATEX certificate and Ex e, Ex d, Ex tc or Ex tb motors. Designed to work in explosive atmospheres with risk of gas or dust. • Cast aluminum propeller. • Engine-propeller air direction. • ...

Air flow: 1 m³/s - 800 m³/s

... competitors. lWide range of technical parameter ensures the fans run at its best efficiency at the specified applications. Centrifugal Fan talks about its Duty： Pressure：300～50000Pa. Centrifugal ...

Air flow: 200 m³/h - 600 m³/h
Diameter: 125, 160, 200, 250, 315 mm

Range of very compact fans (in galvanised steel) for round ducts. They can be installed at any point along a duct. IP 44. They connect directly to standard ducting. Easy assembly and dismantling by means of fixing clamps ...

Air flow: 0 m³/h - 0.7 m³/h
Noise level: 50 dB

Effective Improvement for Air Environment Simply installing it at the edge of the display case to efficiently improve air quality. It is unnecessary to move exhibits when installing it and to open the display case for ventilation after ...