|
|
|
|
|
|
ecofil i 5x16 mm²
Thanks to this system, installing industrial appliances can quickly be performed saving both work and time. Compared to a conventional, rigid current rail it has all the advantages of a flexible flat cable. The connecting boxes show a protection degree of IP 65 which suit industrial applications. They are fitted with compact terminal blocks which are easy to manipulate. If necessary safety cutouts can be connected to the boxes either directly at the output or separately by means of a cable.
ecofil i 7x2,5 mm²
Industrial appliances nowadays reach a high flexibility thanks to bus systems and control devices. To allow easy implementation and maintenance works, the applicances often have a modular structure which has already been determined during planning. The ecofil i 7x2.5 system perfectly suits appliances which have to be easy to modify and where power current and weak current have to be supplied in an easy and secure way. Thanks to this system, the T-pieces which are commonly liable to breakdowns and which are usually necessary for the branching of round cables can be avoided.
|
|
Flat cables in PVC and neoprene design are used as trailing cables for cranes, open fi eld conveyors and shelve service devices.
Flat cables offer the following advantages:
- Extremely small bending radius
- High flexibility
- Minimum waste of space
- Packeting possibility
|
|
ÖLFLEX® CRANE F
Weather-resistant, for harsh environmental conditions; Flat cables need less space than round cables; Considerably smaller bending radii are possible than with round cables
Application range
In crane systems on building sites and shipyards for ensuring important processes
Design
Copper wire bare or tinned
Core insulation: Rubber
Outer jacket of special rubber compound
Product features
Flame retardant according to IEC 60332-1-2
|
|
Electronic components must perform in difficult environments, locations and conditions. Flat cable, because it is lighter, thinner, more flexible and has a longer flex life, is often the best and sometimes the only choice for electrical interconnections in many demanding environments.
Gore offers a unique combination of engineering skills and materials expertise, which allows us to provide creative and reliable solutions for your demanding flat cabling needs. We offer IDC and hybrid cables and assemblies with an unmatched range of electrical, mechanical, chemical and thermal properties. For complex requirements, we can design and build unique hybrid ribbon cables using different cable geometries.
Gore's flat cables use insulation, buffering and jacketing materials that transfer fewer stresses, minimizing conductor fatigue. The materials set includes options for self-supported cabling with controlled motion, eliminating the need for cable tracks in some applications.
|
|
Our cables are studied to obtain, whatever the section, a stacking
optimum under the carts of garlands.
HF6 (black): for intensive uses, very weak radius of curvature. All the cables have a green/yellow driver except the cables armor-plated into 0,5 & 1 mm2.
|
|
Flat Ribbon Cable, pitch 1,27mm:
- Flat Ribbon Cable in AWG 28 with spacing 1,27mm, optionally halogen free, optionally rolled up and jacketed as round cable, with shielding and jacket
Measuring- and trailing cable:
- Flat Ribbon Cable AWG 26, eight elements, cores stranded, shielded PVC- insulated in pairs
molded conductors, multicolored:
- flexible Flat RibbonCable in 0.14mm², 0.25mm², 0.50mm², 0.75mm² with colored conductors by VDE 0812
|
|
| ... products without technical information |
| |
The CHAMPOMATOR 2.5
Terminating Machine is a
compact, semiautomatic
bench machine for terminating
multiconductor, jacketed
cable with a variety of
AMP connectors having
insulation displacement
contacts. It is microprocessor
controlled, and programmed
using a membrane-
switch keyboard.
Pertinent information for
operation, including diagnostics
and error conditions,
is displayed on the
control module.
|
|
Product Facts
n Low applied costs
n Terminates most jacketed
cable
n Straight (180°) or rightangle
(90°) wire dress
n Microprocessor controlled
n Stored program capability
n Selective termination of
connector positions
n Rapid tooling changeover
for different connector types
n Manufactured under an
ISO 9001 Certified Quality
System
|
|
The CHAMPOMATOR 2.5
Terminating Machine is a
compact, semiautomatic
bench machine for terminating
multiconductor, jacketed
cable with a variety of
AMP connectors having
insulation displacement
contacts. It is microprocessor
controlled, and programmed
using a membrane-
switch keyboard.
Pertinent information for
operation, including diagnostics
and error conditions,
is displayed on the
control module.
|
|
Flat shaped Wire Wound Power
It is designed for Space saving and it can be stacked into compact unit.
Mounting Fixture is available.
- Rated Power range : 40W to 450W
- low Inductive type is available
Good Price and Prompt Delivery : within 4 - 8days worldwide !
We even support :
- small quantity order for engineering samples for testing.
- Credit Card online payment
- local Currency
Resistors detail size are listed in our website : http://www.mf-powerresistor.com
For more details, please e-mail to sales@mf-powerresistor.com
|
|
... see all the products in the category
Resistors
|
DIN 41651 Flat Cable Connector System
1. Header with straight solder pins - with long, short or without latch :
Header with straight solder pins - with long, short or without latch
2. Header with angled solder pins with long, short or without latch
3. Low profile header with straight solder pins
4. Low profile header with right angle solder pins
5. Socket connector
|
|
We offer you an extensive range of flexible power transmission components. Our diverse manufacturing processes facilitate the production of highly flexible braided cables matched to suit your specific application, ready-assembled connecting components or welded high-current connectors. From the smallest ground or earthing tapes up to high-current cables with 6000 mm² conductor cross-section – almost all conceivable applications are covered. Whether in air-cooled or water-cooled designs, we can offer you the right components and solutions.
Please contact us directly for technical support.
|
|
High quality and competitive price:
KINTO is one of the leading suppliers in China specialized in manufacture of copper parts for electrical applications.
Product range:
- copper flexible connectors made out of copper strips
- copper flexible connectors made out of baided tapes or stranded ropes
- flexible insulated busbars
- primary copper contacts (contact fingers, contact blades, tulip type contacts, bell type contacts, sleeve type contacts,...)
- primary copper connectors
- copper clamps and other customer copper parts
We use technologies such as press-/diffusion welding, braze welding, cold-pressing, stamping, deep-drawing and high precision machining.
The contact areas can be zinned or silver-coated according to customers' requirements.
We are a ISO9001 certificated company with strict quality assurance system, and we have advanced production and testing equipments to assure the quality of each product.
|
|
|
|
|
|
wired shunts
Are you working in the business of restistance welding? Brouwer Metaal offers wired shunts in a variety of designs and dimensions based on your specifications and applications.
Whether you are specialised in seam welding, projection welding, or butt welding you will need wired shunts that can resist temperature fluctuations. We offer wired shunts made out of a wide array of copper alloys. No matter what the circumstances are, it is essential that you can work with parts that allow high thermal stability. Brouwer Metaal will work with you to produce wired shunts that fit your needs. It is even possible for you to offer us a drawing and we will be able to deliver a product in all possible dimensions.
Brouwer Metaal has been on the forefront of offering innovations and new designs for years, and we can now truly claim to be a major player on the resistance welding market. Our experts are constantly cooperating with our customers to prepare the perfect laminated shunts. Our wide range of products ensures that our customers get the exact products (whether those are laminated shunts, electrode holders, or wire shunts) and materials that they need to ensure the highest quality welding process.
More information can be seen by choosing in the menu on the left. If you would like to receive more specific information regarding our products, please contact us
|
|
| ... products without technical information |
| |
|
|
