|
|
Conductive Top Grating
An anti-static surface for molded gratings
Light Weight
Slip Resistant
Long Service Life
Low Installation Cost
Drains Unwanted Static Electricity
Conductive grating drains off the build-up of unwanted, dangerous static electricity when grounded. The specialized grating produces an electrical resistance of less than 26 kilo-ohms per foot, while retaining other desirable characteristics of conventional FRP molded grating. This specialized grating features a molded-on black safety surface, which provides its anti-static characteristics. This secondarily applied surface can be added to all depths of Fibergrate grating
|
|
Fibergrate® Molded Gratings
Bidirectional corrosion resistant grating
Corrosion Resistant
Slip Resistant
Fire Retardant
Light Weight
Impact Resistant
Long Service Life
Superior Ergonomics
Fibergrate molded grating line comes from the inventor of molded FRP grating. For over 35 years Fibergrate grating has led the fight against industrial corrosion as well as slip and fall accidents. Fibergrate’s standard meniscus top provides an aggressive slip resistant surface along with many other FRP benefits. Available in a variety of depths, resins and panel sizes molded grating is the perfect solution for many applications and environments.
|
|
Multigrid® Grating
Molded grating for screening or protective flooring applications
Light Weight
Corrosion Resistant
Easily Fabricated
Long Service Life
Multigrid is a 1/2" deep multi-purpose lightweight screen that can be used for a wide range of applications including machinery guards; fencing; dividers in factories, warehouses and cages for tools, equipment and animals. Multigrid can also be used as fully supported slip-resistant flooring where wet or slippery conditions exist. Multigrid is a cost-effective protective walkway for trickling filter media or rooftops to prevent damage to the surface when personnel inspect and service equipment.
|
|
Covered Grating
Solid surface for walkways or odor control
Corrosion Resistant
Slip Resistant
Low Maintenance
Solid Top
Covered grating is a long-lasting, molded fiberglass floor product that combines slip resistant floor plate and molded grating manufactured with in any of Fibergrate’s resin systems. Covered grating offers a strong, level surface for foot or cart traffic and provides approximately 30% higher stiffness than that of open mesh grating. Covered grating provides solid flooring to prevent contamination of work surfaces below, to control subsurface odors or to prevent tripping hazards for narrow heels.
|
|
Molded High Load Capacity (HLC) Grating
Heavy-duty grating for fork lifts up to H20 loads
Corrosion Resistant
Non-Conductive
Long Service Life
Low Maintenance
For Forklift up to H20 Loads
Molded HLC grating is yet another product in the arsenal of engineered FRP solutions by Fibergrate. While capitalizing on some of the traditional benefits of molded grating products - high strength, corrosion resistance, fire retardancy, nonconductivity and low maintenance -this specially manufactured molded FRP product has been engineered to carry from loads from forklifts up to H20 loads that traditional molded FRP grating products are unable to support.
|
|
Micro-Mesh® Grating
Elevated floor grating for subfloor access and unobstructed air flow
Corrosion Resistant
Light Weight
Low Maintenance
Non-Conductive
Provides Easy Underfloor Access
Micro-Mesh access flooring system is designed as a low cost alternative where subfloor access and unobstructed air flow is required. Light weight, 2'x 2' Micro-Mesh panels are easily removed, providing ready access to electrical conduits, air supply plenums, and service lines. Micro-Mesh panels are the right choice to minimize vibration from rolling cart or wheelchair traffic. The panels with a 1/2"open area between bearing bars are ADA compliant and meet the “15 mm ball test”.
|
|
FGI-AM™ Resin System
A unique resin system successfully tested to inhibit unwanted growth.
New Proprietary Resin System
USDA Acceptable
For Both Fibergrate and Chemgrate Products
Corrosion Resistant
Fire Retardant
Superior Ergonomics
Long, Low Maintenance Service Life
Fibergrate has developed a unique resin system that has been successfully tested to inhibit the growth of bacteria and fungus that cause foul odors, discoloration, and mildew on the surface of the product that in some cases can degrade or corrode the product. FGI-AM maintains all of the qualities of Fibergrate FGI including USDA aacceptability, an ASTM flame spread index of 25 or less, superior slip resistance and excellent corrosion resistance in many applications.
|
|
|
|
|
|
Molded and pultruded gratings
Flooring, walkways and decking areas in corrosive environments need to offer superior load bearings as well as corrosion resistance. The use of good quality grade resins, including UV inhibitors and other additives together with sufficient glass fibre reinforcement result in a product which offers chemical and corrosion resistant while withstanding the required force/load.
Molded Gratings
Exel moulded grating is manufactured with continous filament strands wetted thouroughly with premium grade polyester resin. Such inherant characteristics ensure excellent corrosion resistance over a wide PH range, both acidic and caustic.
Pultruded Gratings
- Can be used where mechanical load is very high or support distances are very wide
- Panels are fabricated to drawings with minimum wastage
- Performs structurally better than moulded grating with a maximum deflection to be limited to SPAN/200 (the same limit as for steel grating)
- I-bar and T-bar type
- 25 mm, 38 mm and 51 mm
- Open mesh, solid top or micromesh
- Gritted or meniscus surface finish
|
|
The MEISER Finned Grating represents a special form of press grating, which is distinguished by its projected cross bars.
Finned gratings are enclosed pressure locked gratings, with crossbars which protrude above the surface of the grating. The cross bars are pressed into the notched bearing bars on center-to-center spacings of 11,1 mm, 16,65 mm and 22.2 mm.
The standard spacing between the bearing bars is 100 mm, but can be varied to suit the end users loading requirements. The length of the span ( the direction of the bearing bars) can be up to 500 mm. The gratings are designed for ”pedestrian access”.
Finned Gratings are widely used as gutter gratings or on gangways for building maintenance. Other common fields of use are swimming pools and air conditioning. Comb gratings are available in steel, aluminium and stainless steel.
|
|
One of the largest manufacturers of flatbar in Europe, we offer our customers a comprehensive range of starting products, finished products, refinements and surface treatments as well as more sophisticated design products such as staircase installations.
The international presence of our trademark world-wide stands for fundamental know-how and experience. In 5 productions plants world-wide, we insure innovation and continuous improvement of our grating products.
We would like you as our customers to benefit from our years of know-how and from our highly competent planning assistance service.
|
|
- Modular floor slats are light and easy to install,
assembled and removed without tools
- Corrosion resistant to most chemicals
- Channels allow liquids to escape
- Protects ground
- Comfortable surface insulated from cold and humidity
|
|
- A comprehensive GRP service for any applications in corrosive environment : Long life quality, Lightweight, Highly safe.
- Molded gratings KEFREN range , pitch 19x19 mm, thick 30,38,50 mm, all dimensions up to 3mx3m.
- Pultruded gratings KEOPS range, pitch 19 ,31 mm.
- Solid flooring SAKARA : lozenge or grit cover, thick 53 mm. All dimensions up to 3mx3m.
- GRP Frame work, stair treads, stairs, , safety ladders.
|
|
|
|
|
|
- Ref M24/MPR24 : Economical, lightweight single station
industrial mat.Bevelled edges for safety and access for wheeled vehicles.Non-slip.Good drainage.100% natural rubber.M3 Fire classification.Colours: black, red nitril (contact with grease).Size:91x152cm.Thickness:14mm.Weight:12kg
- Ref M22/MPR22 : Economical mat with straight edges
Same characteristics as the M24 except with straight edges. 100% natural rubber.Colours: black, red nitril (grease-resistant).Size:100x150cm.Thickness:14mm.Weight:14.5kg
- Ref M28 : Economical, clip-together square mat
Easy to set up (lightness). 100% natural rubber.Colour : black, upon request : with Nitrile compound (resistant to greases).Size:86x146cm.Thickness:12.6mm.Weight:12kg
- Ref MB45/MB45PR : Square mat tiles with unique
built-in connecting system.Thick high quality resilient rubber offers superb anti-fatigue characteristics.Easy to handle, and relocate.Excellent drainage and aeration. 100% natural rubber.Colours: black, red nitril).Size:91x91cm.Thickness:14.5mm.Weight:7.6kg
- Ref M69 : For severe operating conditions. Non-slip, easy to install,selfweighting,safe,sound-absorbent.Good drainage.A special model with M1F1 classification is available.100% natural rubber.Colour: black.Size:150x100cm.Thickness:23mm.Weight:22kg
|
|
|
Carpet and Grating out of rubber and plastic: Non-skid, Insulator.
|
|
* Rubber matting: anti-slip with designs
* Felt Fibre Cork
* Lath flooring: rubber or polypropylene
We offer all qualities of rubber sheeting for :
joints - fittings - flaps- strips - coating - shock absorbers - funnels - anti-abrasion coating - anti-corrosion coating
|
|
A very large number of materials:
STEEL
GALVANISED
STAINLESS STEEL
ALUMINIUM
ALLOYS
OTHERS
PVC …
In an extended range of thickness:
From 0.3mm to 30mm
With varied shapes of holes:
ROUND
SQUARE
LONG WITH ROUNDED ENDS
LONG WITH SQUARE ENDS
HEXAGONS…
In sheets or in reels, from single part to large series, flat or shaped, you can find a solution for all your needs from GANTOIS.
|
|
DENSORB Sorbents
High-performance absorption materials for containing and effectively absorbing leaking liquids.
Avoid unnecessary costs and effort!
Larger accidents are not always the most dangerous.
Small leakages can also endanger the environment and compromise safety in the workplace thus posing a hazard to the workforce. Avoid high costs for clearing debris, cleaning up and waste disposal, protect
yourself with DENSORB binding materials.
Spill kits in many different sizes suitable for all emergency situations imaginable and
wide range of absorbent rolls, mats, cushions, snakes, barrel cover, oil barriers, granules and practical accessories.
|
|
|
From dry to wet conditions, light to heavy duty, use this catalogue to choose the right NOTRAX® mat for the right application. It will contribute to increased productivity, employee satisfaction and fewer injuries.
|
|
|
Our floor slats have a specially designed cushioned profile. This reduces the strain placed on the back and legs from constant standing. The slats can be combined and interlocked as you choose. Ramps and corners, for dolly and trolley traffic, are available. The slats withstand most chemicals, oils and weak acids and are suitable to use in temperatures between -10°C and +80°C.
|
|
In many facilities, people are one of the prime generators of static electricity.
The simple act of walking around or even sitting on certain types of stools can generate several thousands volts on the human body. If not properly controlled, this static charge can easily discharge into static sensitive devices, potentially creating damage to equipment. These NOTRAX® Electro Static Discharge (ESD) protective mats are formulated to drain static electricity from workers thereby avoiding unpleasant static shock while safeguarding equipment.
|
|
3M Nomad Basic Entry Mats
The right mats for your entranceway are rarely top of mind when you're managing a busy restaurant, café, bar, shop or office. But it's where you can make a good first impression and even save on cleaning and maintenance costs.
In contrast, buying 3M Nomad Basic Entry Mats gives you the reassurance of owning brand-new, fit-for-purpose, durable matting that can last for months*.
Easy to install, handle and discard, 3M Nomad Basic Entry Mats are discreet, hassle-free and cost-efficient.
|
|
3M Safety Walk cushion matting is a straight forward and low cost solution to reduce physical fatigue and its impact on productivity. Most of the people who work standing up all day suffer from pain and discomfort.
Antifatigue matting systems have been developed to reduce workers’ accumulated physical fatigue caused by operations where the worker stands at a workstation for long periods.
|
|
|
Ergonomic Workplace Technology offers high quality ergonomic rubber mats, low noise blowguns, and ergonomic hammers.
|
|
Ergonomic
* adjustable in height
* angle adjustable, large seat
* high backrest:
o supports the upper part of your back
o relieves your spine
o protects your lower back (lumbar region)
* precisely adjustable backrest support
* motion synchronous shifting of the pivotal point prevents "shirt-riding-up effect.
* ergonomic upholstery.
|
|
Traffic Mat
Highly absorbent walkway protection, suitable for any surface type and employed in the prevention of dangerous liquid spills and dispersions (acids, chemicals, oil etc. ). Formed by a layer of absorbing material plus a layer of external reinforce in non-woven material which lengthens its resistance. Ideal for frequently-used walkways situated around machinery where maximum safety is required.
|
|
|
|
|
|
- Ref NT415 : For severe conditions. Extremely tough vinyl surface with raised diamond texture for better adherence and unbeatable durability. Thick nitrile foam under the mat (antifatigue properties). 4 edges are bevelled to minimize falls. Application: dry surfaces and greases prone environments. Colours: available in black with yellow marking to delineate safety areas. Size : 61x91, 81x152cm, roll. Thickness 14.3mm
- Réf NT427 : Entry level anti-fatigue matting in rolls
High quality foam equipped with a textured surface. This vinyl foam mat with closed cells has a texture that sends back energy and relieves back and leg fatigue, thereby improving productivity. Ideal for assembly lines and work in the standing position, this mat also insulates from the cold, reduces noise and breakage, and protects your floors. Non-slip. Edges are tight and bevelled, thereby minimizing falls. Application: dry surfaces.
100% vinyl foam. Colours: grey and black with yellow marking to delineate safety areas. Thickness 9.4mm
- Ref MBY83 : The ergonomic mat for safety areas
100% natural rubber.Non-slip surface.Resistance to abrasion and cuts.Mat with yellow edges for safety areas. Applications: wet and dry surfaces. Colour: black bordered with yellow. Size 90x60, 90x120cm - Thickness 16mm
|
|
|
|
|
|
- Ref NT791 : Anti-static mat that can be earthed, specially designed for electronic product and manufacturing areas where controlling static and fatigue is vital. Equipped with an upper vinyl surface, this mat, when earthed, ensures rapid and effective dissipation of static electricity, while its nitrile foam underlayer offers firstrate
comfort and improves employee productivity. Resistivity:
1x107 ohms. Application: all surfaces sensitive to static
electricity. Upper vinyl surface, nitrile foam underlayer.
. Colour: grey
. Size : 0.61x0.91m / 0.91x1.52m - thickness 12.7mm
- Ref NT796 : Anti-static mat that can be earthed, three times more resistant than conventional sponge-type mats. This product will meet all budgets and still offer all the advantages of a more expensive mat. Application: protects your products and equipment from static electricity discharge. Resistivity: 5x108 ohms.
Vinyl/nitrile foam, rough top surface.
. Colour: black
. Size 0.61x0.91m / 0.91x1.52m - thickness 12.7mm
|
|
Who stands a lot needs ERGOMED
ISOLOC ERGOMED and ERGOFLEX are medical-ergonomic mats for standings jobs for fatigueless standing at the working place and therefore serve especially for the safety at work.
ISOLOC ERGOMED
Highest quality by the use of high-grade elastomeres; can be used in many different cases. They are available as the types oil resistant (oil), low inflammability (B1) according to DIN4102 part 1 or especially for the food/semiluxury food industry (L).
ERGOFLEX
Ideal for standing jobs where there is less oil or other coolants/lubricants. Ergoflex is available with holes and without holes.
ERGOPUR
The ERGOPUR mat was examined at the Institute for Ergonomics, Munich, and rated as “good”. Using the ERGOPUR mats reduces the corporal strain of standing jobs up to 60 percent. ERGOPUR mats are resistant to mineral oils and other media as well as CFC-free. It has a low inflammability and fulfils the fire protection class B1 according to DIN4102, part 14.
|
|
Anti-Fatigue Mats
Enjoy air-cushioned comfort anti-fatigue mats from New Pig! Choose from our BubbleZorb® anti-fatigue matting, Comfort-Eze® anti-fatigue matting or our ComfortKing® anti-fatigue matting. Made of durable rubber, the best in safety flooring material, these anti-fatigue mats come in a variety of sizes and textures to accommodate your industrial needs.
|
|
|
Now with a 100% permanently anti-microbial surface and sponge, Wearwell’s UltraSoft Tile-Top AM will destroy micro-organisms on contact. Designed for long-term performance, the green micro-pure sponge base is a Nitrile rubber composite for exceptional comfort while the non-porous vinyl surface has an extra chemical resistant wear-layer.
|
|
|
|
