|
|
|
|
|
|
HTA and HTA-Ex:
HTA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Höntzsch TA
sensors with thin-film sensor element can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HTA by 9 V battery or HTA- plug-in power supply
power supply HTA-Ex Li-recharchable battery, running time approx. 20 hours.
analog output 0 . 4 V = 0 . x m/s.
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
|
|
|
|
HFA and HFA-Ex:
HFA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Höntzsch vane wheel sensors
can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HFA by 9 V battery or HFA- plug-in power supply
power supply HFA-Ex Li-recharchable battery, running time approx. 50 hours.
analog output 0 ... 4 V
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
|
|
|
|
HVA:
HVA is for use in category 3G (zone 2)
hand-held instrument with IP64 type of protection to which all Höntzsch vortex sensors
can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HVA Li-recharchable battery, running time approx. 20 hours.
analog output 0 ... 4 V
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
Handy logger MR2041-E is a palm size data logger, it capable to store up to 10000 data per each channel. Power supply of logger is selectable from AA battery or AC adaptor, so it is usable as a portable type logger or fixing type logger. Using the multi-media memory card (MR-2041-M) can stores measured data up to 5 million.
Using the exclusive software, recording/recalling of data and programming of logging parameters can be executed with logger or through a personal computer.
- Input signals: thermocouple K, E, J, T, 0 to 5V, 0 to 20mA
- Simultaneous 4 channels, measurement and display
- High/low alarms for each channel
- External memory (multi-media card) is usable.
- Calculation function: maximum / minimum / average
- Logging method: log mode and tag-mode
- Data process-able through a personal computer
- CE marking, IP 64 dust tight and splash proof enclosure
- AA battery supply
|
|
|
|
|
|
Single input industrial Digital Temperature logger [615]
Dual input industrial Digital Temperature logger [625]
Quad input dual display industrial Digital Temperature logger [645]
The 600 series EasyCal™ Digital Temperature Logger is microprocessor-based, digital industrial grade multi-channel thermometer designed to use external K-,J-,E-,and T-type thermocouples (temperature probes)as temperature sensors. The series thermometer response quickly and have industrial accuracy (0.1 % + 0.5 °C), logging and PC USB interface capabilities with powerful Windows® software CD. You can calibrate the thermometer using the MENU key while it powered off. The thermocouple with wire spool can be stored in the back of the thermometer.
Distinctive Innovation
The portable design and humanization front panel is convenient to set up, operate and measure for user. You can open the cover and replace batteries conveniently without damaging calibration seal. Also have waterproof, dustproof shell and shock-protected rubber casing, groove in the back used to place the thermometer with wire spool.
Live clock and inside temperature display.
With minimul, max and average of the relative time base, supply time reference for main event.
Quick offset for temperature
Compensate for thermocouple errors to increase the accuracy.
Multiple units
Select °C, °F, or K as units according to requirement.
Low battery indicator
Display “BAT”, when the voltage of batteries is low.
Data recording
Recording up to 9999 locations and recording interval is adjustable.
|
|
Features Specifications: Tecpel 4-Input Temperature Recorder 319
Usage: Industrial Theory: Temperature Recorder Certification: CE
Tecpel 4-input temperature recorder
Dtm-319 features:
Led back light
Four channel input
Four channel display
Auto range
Rs-232 interface
With window software
16,000 records data logger
Auto power off
Hold function
Resolution 0.1deg c 0.1 deg f
Display:
3 1/2 digit lcd
Low battery:
Symbol will appear when the battery is low.
Measurement range:
-200 c ~ 1370 c
-328 f ~ 2498 f
Accuracy:
-200 c ~ 1370 c +/- 0.3% rdg + 1 c
-328 f ~ 2498 f +/- 0.3% rdg + 2 f
Input protection:
60v dc or 24vrms ac maximum
Battery:
9v battery
Operation temp.:
0 c~ 50 c
Storage temp.:
-20 c ~ 60 c
Dimension:
184mmx64mmx30mm( 7.25"x2.5"x1.2")
Weight:
Approx.220g
Accessory:
Manual,9v battery, carrying case, k type bead sensor x 2, rs-232 cable, software; USB Cable OPTIONAL
|
|
| ... products without technical information |
| |
|
|
|
|
Multi functionally measuring instrument and data logger with 5 measuring inputs, 2 outputs, RS232, Ethernet, analog
Technical features
- Modern housing with rubberized impact protection and positioning clip; also moisture-proof thanks to new, injectionmolded connectors and sealing lips.
- 5 ALMEMO® input sockets, electrically isolated, for 5 ALMEMO® sensors, 20 sensor chann., 4 additional internal function chann.
- 2 ALMEMO® output sockets for digital interfaces, analog output, trigger input, alarm contacts, memory card.
- High-speed, high-resolution A/D converter, 24-bit, 50 meas. op. per sec. New measuring ranges Pt100, 0.000 to 65.000 °C.
- Ideal display with large, brightly illuminated graphics.
- Easy and convenient operation by means of 4 soft-keys and cursor block, Comprehensive menu system with wizards and help windows.
- 9 measuring menus (3 can be freely configured by user from range of 50 functions).
- Measured values can be displayed graphically in line diagram or bar chart form and from 1 to 20 measured values can be displayed numerically in various sizes.
- Measuring functions : Measured value, zero-setting, setpoint adjustment, maximum and minimum values stored with date and time-of-day, smoothing, average values over time or measuring points, limit value monitoring, cold junction compensation, temperature compensation, and atmospheric pressure compensation
|
|
Description:
The model D101 is battery operated data logging unit that records data or measurements from other instruments. It is used along with Anaheim Scientific "H Series" products when a data logging application requires the recording of a meters measurements. The D101 comes with Software, a RSCBL2 PC Interface Cable and one 2EPCBL Cable to interface the D101 to an "H Series" instrument.
Features:
* Stores 8,000 measurement values
* Settable sampling time 1 second to 9 hours
* Auto or manual logging
* Saves data with time stamp information
* Large LCD display
* Two year warranty
Applications:
* Connect to "H Series" Anaheim Scientific products
* Record measured values over extended periods of time
* Export recoded data to Spreadsheet programs for reporting data
|
|
Recording pressure at compressors
For optimization, high pressure, low pressure and 2 temperatures are recorded simultaneously.
Material:
1x HOTBOX SE universal datalogger 2501
1x Pressure sensor -1..9 bar 3280-A
1x Pressure sensor -1..24 bar 3280-B
2x NTC temperature sensor -50°..+140°C 3055-L03
1x Connector for 2 NTC sensors 2540-P4
1x Connector for 2 pressure transmitter 2540-P5
2x Sensor mounting and test 2540-B
|
|
| ... products without technical information |
| |
|
|
|
|
HTA and HTA-Ex:
HTA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Höntzsch TA
sensors with thin-film sensor element can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HTA by 9 V battery or HTA- plug-in power supply
power supply HTA-Ex Li-recharchable battery, running time approx. 20 hours.
analog output 0 . 4 V = 0 . x m/s.
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
|
|
|
|
HFA and HFA-Ex:
HFA-Ex is for use in category 2G (zone1)
hand-held instrument with IP64 type of protection to which all Höntzsch vane wheel sensors
can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HFA by 9 V battery or HFA- plug-in power supply
power supply HFA-Ex Li-recharchable battery, running time approx. 50 hours.
analog output 0 ... 4 V
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
|
|
|
|
HVA:
HVA is for use in category 3G (zone 2)
hand-held instrument with IP64 type of protection to which all Höntzsch vortex sensors
can be connected.
high-contrast LCD liquid crystal display, measured value display 13 mm high four-digit with decimal point as well as affiliated display unit, display of duration of measurement in seconds 6 mm high, adjustment and configuration instructions, operator's information, status display 3 mm high.
interface RS232 for direct transfer of the stored measured values to a PC.
instantaneous values every second.
Display of standard velocity v, standard volume flow V/t or temperature (resolution 1 °C), selectable.
Display of instantaneous value in the START and also START/STOP mode also with long-term measurement.
Display units:
m/s, m³/h, l/min, °C.
power supply HVA Li-recharchable battery, running time approx. 20 hours.
analog output 0 ... 4 V
data and measured value storage for 1000 data records.
When being stored the data records are automatically marked with a group number (max. 99)
and serial number.
|
|
The Trimble® TSC2™ Controller is an advanced handheld field computer. Increase your surveying and business potential with:
Microsoft Windows Mobile for Pocket PC operating system: Run standard and specialized Pocket programs plus your choice of powerful Trimble field software.
Expandable hardware: Adding removable memory and third-party media extends data logging capabilities
Industry-leading communication technologies---Bluetooth®, wireless LAN (802.11b) and an internal 2.4 GHz radio option---offer cable-free convenience and wireless connectivity anywhere.
|
|
|
Intermec's rugged handheld computers are built for the task at hand, combining the advantage of consumer PDAs and high-end industrial mobile computers into a single rugged package. Like PDAs, Intermec systems are small and lightweight, yet they provide targeted functionality, a tactical keypad and enhanced connectivity including industry standard 802.11x, Cisco® compatibility and Bluetooth®. Combining the latest Microsoft® Windows® operating system technology, Intermec SmartSystems™ device management software, superior industrial design and ruggedness, Intermec handhelds are easy to deploy, use, and support for a small business or an enterprise.
|
|
MC9090-G Handheld Mobile Computer
Designed for workers inside your four walls, the MC9090-G offers advanced data capture options and integrated wireless LAN/PAN plus a comfortable ergonomic pistol grip to enable real-time data collection in scan-intensive environments - in the warehouse, on the loading dock, out in the yard, and in the back room or out on the sales floor of a retail operation.
|
|
PHL1300
The PHL1300 is small, lightweight and ergonomically designed with a simple keypad layout anyone can use. This terminal is equipped with an integrated barcode laser scanner.
Two AA batteries or an optional Lion rechargeable battery pack enable a full day's work on a single charge. The battery backup maintains data for up to 21 days even when main battery power is lost. The PHL1300 is equipped with 8 MB of data memory; large enough for intensive data collection applications.
The PHL1300 is a rugged terminal, designed to meet IP 54 standards for dust and moisture intrusion. 19 keys of the multi functional keypad can be programmed for user-defined functions. The IrDA port allows communications directly to belt-mounted devices such as portable printers.
|
|
|
|
|
|
OPL9714
This barcode data collector with integrated GPS module allows registration of the actual time and geographical position together with the barcode data. Combine three types of registration at once; barcode data, time stamp and position tracking.
The OPL9714 is equipped with a high performance laser scanner, an integrated real-time clock and a GPS module. The identified barcode data with the actual time and location is stored on the on-board memory. This data collector scans fast and accurate and can easily manage a large amount of registrations.
Comfortable use
The shape of the product provides a convenient fit. This elegant and lightweight OPL9714 enables comfortable single-hand scanning. The LCD display allows easy readability of as many as 10 lines of information. The three buttons enable the user to navigate through the loaded application and scanned data.
Rugged
The OPL9714 is sealed up to IP 54 standards and withstands drops of 1.5 meter. This makes the OPL9714 suitable for multiple mobile applications.
Various cradles are available providing different communication and charging options. The IrDA interface within the cradle allows data transfer when the scanner is inserted for charging. The multiple station cradle permits charging of up to 5 terminals simultaneously.
|
|
|
|
|
|
The efficient handheld touch terminal empowers mobile workforce
EBN is proud to present the fanless handheld POS terminal, MobiPOS 508 to be the best portable solution for hospitality applications or the warehouse management. The small but powerful MobiPOS 508 built-in AMD Geode LX-800(500MHz) processor features low power consumption to become fanless system. MobiPOS 508 is not only created for the hospitality industry, this terminal is well suited to generate process and transfer all sorts of relevant data operations information.
MobiPOS 508 Features:
-AMD® low power consumption and high performance technology.
-All-in-one compact handheld device fits in every application.
-8.4" TFT LCD with 5-wire resistive touch panel for friendly interface.
-Features Wireless 802.11 b/g and Bluetooth communication for high-speed data transmission.
-Optional integrated with barcode scanner, smart card reader and MSR reader
-Microsoft Windows series operation system ( Windows XP, XPe, Win CE, WEPOS) and open-source Linux operation system supported
|
|
|
|
|
|
Dolphin® 9551 Mobile Computer
The same pistol-grip design featured on the 9550 with an integrated laser engine for long range scanning applications in cross-docking and warehousing.
Used-Tailored Ergonomics - Custom designed for front-line workers and their applications-provides worker comfort and increased productivity while reducing fatigue.
Wireless Dual Area Networking (WDAN) - Integrated wireless LAN and PAN communications enables continuous, real-time access to mission-critical information throughout the enterprise and convenient wireless connectivity to common peripherals.
Dolphin 9000 Series mobile computers bring you no-compromises durability and versatility in a full industrial Portable Data Terminal.
Users will appreciate the sleek, lightweight and ergonomic design-and the ability to go more than a full work shift without changing batteries. Multiple integrated communication technologies keep your mobile workforce connected from anywhere, while the Adaptus® Imaging Technology 5.0 platform enables workers to do more: read all bar codes, capture signatures and take digital images, all with a single device.
|
|
New capabilities have now been introduced into integrated information systems. The communication compatibility with industry standards provides a unique platform for integrated solutions (CIM).The customer can combine the flexibility and advanced features of the Micronix product line to build a high performance network of data collection, access control, time monitoring, and industrial control systems.
|
|
The MC 9090ex-G Mobile Computer version with a pistol grip is a compact unit for safe barcode scanning in hazardous areas.
The scan trigger is conveniently positioned at the pistol grip. Thus barcodes can be captured with only one hand. The integrated radio module enables real time data access to your host system.
The MC 9090ex-G combines the strength of Microsoft's Pocket PC platform with the power of the Intel® XScaleTM PXA270 processor with 624 MHz.
A further highlight is the large easy-to-read 1/4 VGA color display with touchscreen technology. The MC 9090ex-G is working with the IEEE 802.11a/b/g radio standard (direct sequence).
|
|
Psion Teklogix provides complete speech-based logistics solutions consisting of software and wearable computers combined with our comprehensive implementation and support services. Our speech solutions integrate with a range of warehouse management systems, providing real-time access to speech-directed application data.
|
|
|
|
|
|
XPOCKET
Within the range of AXESS TMC products for personnel ID and access control, XPocket is the pocket reader for mobile data collection applications. This reader meets all the specific requirements of companies and agencies whose employees are highly mobile (i.e. cleaning companies, construcion sites, public organizations, universities, schools , care homes, etc ) where there is often a need to monitor their activities while on the road or working off-site (representatives, agents, sales people, financial promoters, scientific informers, etc).
Main features:
- Ergonomic design and reduced size
It is so small and light that it really does fit in the pocket.
- Shock resistant
The materials used enable it to resist knocks and survive being dropped.
This device is ready for use in dirty, contaminated and generally “hostile” environments (such as construction sites). In this regard, the use of RFID technology is also highly advantageous. The Tags are in fact made for use under difficult and challenging conditions (e.g. thermic, chemical and mechanical shocks).
- All functions on three Keys
- Last-generation back-lit LCD graphics display
- Bluetooth or USB interface for data transfer
Every XPocket reader can be recognised automatically by PCs or PocketPCs equipped with Bluetooth or USB interfaces, as well as by the latest generation of Bluetooth-enabled mobile phones. Using special software for the download of data, this means that all the information gathered can be imported in an encrypted and secure manner.
...For further information www.axesstmc.com
|
|
| ... products without technical information |
| |
|
|
|
|
For failure events recording on voltages, currents and logical signals in power networks of home, high, and possibly also very high voltages. It is especially suitable for capturing and identification of random one-shot events in the power mains, such as short-run overvoltages, undervoltages or overcurrents.
Characteristics
- Designed for recording failure events - course of voltages, currents and logical signals in power networks of home, high, possibly also very high, voltages
- Especially suitable for capturing and identification of random one-shot events in the power mains, such as short-run overvoltages, undervoltages or overcurrents
- 3/4 galvanically isolated voltage inputs of 100 V AC and 400 V AC range
- 3/4 current inputs for use of current probes and clamps with voltage output in 0,1 ÷ 3V AC range
- Eight binary logical signals (e.g. protective components' contacts)
- Sampling frequency up to 4 kHz
- Data stored in an exchangeable SRAM memory PC-card (PCMCIA)
- Supply voltage 230 V AC, backuped with a built-in accumulator
- Setting, data visualisation and processing with Cetis32 program
|
|
|
|
see the results for the following category : 