Temperature: -50 °C - 150 °C
The SL150 is an autoclave load temperature probe designed for use in pharmaceutical steam autoclaves. For measuring the temperature of either the inside of the autoclave or steriliser ...
Thermal Detection
Temperature: -50 °C - 150 °C
The SL160 is an autoclave load temperature probe designed for monitoring the temperature of liquid loads contained in bottles or similar containers. The SL160 has a 90° bend in the ...
Thermal Detection
Temperature: -50 °C - 250 °C
For temperature measurement on pharmaceutical processes, manufacturing and service plant. The temperature probe is customer specified, and comes with a 316 stainless steel sheath and ...
Thermal Detection
Temperature: 200 °C - 1,000 °C
Probe diameter: 0.5, 1, 1.5, 2, 3 mm
... 600 (Type K) stainless steel sheath, with sealed end and high temperature extension cable with metallic overbraid. Max. temperature: 600°C (J type) and 1000°C (K type). Max. cable temperature: ...
Vulcanic
Temperature: 90 °C - 1,000 °C
Probe diameter: 6, 3 mm
... ) stainless steel sheath, with an electrical plug, and with an optional shielded PVC extension cable. Maximum operation temperature: 600°C (TC J) or 1000°C (TCK), 200°C on the connector and 90°C on the cable.
Vulcanic
Temperature: -20 °C - 80 °C
Probe diameter: 3, 6 mm
... compression gland for cable dia 8 mm. 1/2” NPT threaded fitting welded below the head Maximum operating temperature: 600°C (TC J) or 1000°C (TC K), Temperature range: - 20 to + 80°C on the head Other ...
Vulcanic
Temperature: -70 °C - 500 °C
Insertion probe with handle with 1 m cable • Class A sensors with a 4-wire connection> • Connection: 4-pin Binder connector plug series 711 • 90: Response time to reach 90 % of actual temperature ...
Temperature: -100 °C - 250 °C
... confined conditions such as temperature dry well calibrators Pt 100 temperature sensors: Use of highly stable and aged temperature sensors Configurable: ...
Temperature: 0 °C - 1,200 °C
The standard temperature sensors are mainly used with temperature calibrators to make it easier to calibrate a temperature sensor by comparing the value ...
... multitude of fitting options. Cold junction ended in bare wires, connector, head or with pot seal and extension wire. Sensors with handle to measurement gases, liquids, surfaces, frozen food, pipes, etc. • Calibration: ...
Simplex, duplex or multipoint thermocouples, made from bare wire and ceramic beads, protected with simplex or duplex sheaths, with connection head (DIN A, DIN B, DIN C, NEMA 4 or explosion proof) and ceramic socket. Optional: antivibration ...
Custom Sensor - Fabricated Thermocouple (FA Style) Labfacility are specialists in the design and manufacture of custom-built temperature sensors at our 12,000 square foot Yorkshire ...
Labfacility Limited
Custom Sensors - Mineral Insulated Thermocouple with 100mm Leads (MD Style) Labfacility are specialists in the design and manufacture of custom-built temperature sensors at our 12,000 ...
Labfacility Limited
Custom Sensors - Mineral Insulated Thermocouple with Bare Leads (MF Style) Labfacility are specialists in the design and manufacture of custom-built temperature sensors at our 12,000 ...
Labfacility Limited
Temperature: 0 °C - 400 °C
Probe diameter: 6, 8 mm
Cable connection Service intended: These rugged thermometers are well suited for machine and apparatus engineering, pressure vessels and piping as well as for environments in chemical process and food industry. Stem:Stainless steel ...
Temperature: -200 °C - 1,400 °C
... Thermowell:Steel 446 / Stainless steel 316Ti or ceramics Temperature element:Thermocouple per DIN EN 60584 Fe-CuNi type (J) NiCr-Ni type (K) Pt10Rh-Pt type (S) Pt30Rh-Pt6Rh type (B) Temperature range:see ...
Versatility of use, c0st0 c0ntenut0.Taratura: J (Fe-C0), 0cchiell0 in 0tt0ne Cav0 length in meters. 1.C0mp0st0 from c0ndutt0ri ilessibili is0lati C0n braid elettr0vetr0 silic0ne ric0perta C0n copper braid stagnat0. M0lla crease in0x ...
Temperature: 0 °C - 150 °C
Probe diameter: 6 mm
Cable sensors Pt100/Pt500 in 2- or 4-wire technology for installation in immersion sleeves Products Application Building technology Local / district heating Temperature probes Products ...
Temperature: 0 °C - 180 °C
Probe diameter: 6 mm
4-wire DIN head temperature sensors for pocket mounting Products Application Building technology Local / district heating Temperature probes Products ...
Temperature: 0 °C - 180 °C
Probe diameter: 5 mm
2-wire cable temperature sensors for direct immersion or immersion in a thermowell Products Application Building technology Local / district heating Temperature ...
Temperature: -45 °C - 300 °C
Probe diameter: 3 mm
The Beamex IPRT-300 is a general-purpose Pt100 temperature sensor suitable as a reference sensor in industrial applications. It provides temperature range up to 300 ...
Beamex
Temperature: -50 °C - 200 °C
Probe diameter: 6 mm
... provides accurate and reliable temperature measurement for a wide range of applications. What is an RTD? An RTD is a type of temperature sensor based on the correlation between ...
Temperature: -200 °C - 1,200 °C
... compressed fire-resistant magnesium oxide. The good thermal transfer between the sheath and the thermocouple enables short response times and high measuring accuracy. •Application-specific insertion ...
Temperature: -200 °C - 160 °C
Response time: 12 s
... transition junction and the lead wires are required to withstand temperatures covering the entire operating range of the probe. (“Immersion” in this case simply means exposure to temperatures other than ...
Fluke Calibration
Temperature: -40 °C - 1,200 °C
... .. +333°C) ± 0.0075 [t] (t > +333°C) -Ceramic insulation of the thermocouple element -Suitable for direct insertion into molten metal
Temperature: -40 °C - 1,100 °C
... different materials that, due to the thermoelectric effect, produce a voltage from which the temperature can be derived. Depending on the desired application temperature, various thermocouples are available ...
Temperature: 900, 1,800 °F
Process pressure: 700 psi
... sheath. RTD Transmitter Assemblies with Thermowell RTDT assemblies transmit process variable temperatures. Available as part of the temperature sensor assemblies or as a separate ...
Temperature: -200 °C - 1,350 °C
... joined at one end. Changes in the temperature at the “hot junction” (measuring end) induce a change in electromotive force (EMF) at the “cold junction,” where it can be input into a controller or indicator. As the temperature ...
Temperature: 45 °C - 90 °C
Probe diameter: 3.2, 4.8, 6.4 mm
Dynisco has a wide variety of robust Melt Temperature measurement devices which are designed to measure temperature in the melt stream for the Extrusion and Polymer Processing Industries. Select from ...
Dynisco
Temperature: -75 °C - 1,000 °C
... we stock a broad selection of high accuracy PT100 RTD probes for use with PT-104 temperature logger. The Type K thermocouple is known as an all-rounder. The temperature measurement range is wide, cost ...
Temperature: -40 °C - 85 °C
... humidity - 90%，Not frost Output signal - Electric current，Voltage，SSI，Profibus-DP Supply voltage - 24V（±20%） Temperature range - -40℃ ～ +85℃ Electrical Protection - IP67/符合GB 4208-2008(Mating ...
Temperature: -50 °C - 400 °C
Process pressure: 25 bar
Probe diameter: 4, 5, 2, 6 mm
... applications Optionally also available with digital 1-wire bus interface. Low wiring effort The application areas for temperature sensors are very individual and the conditions are often harsh. ...
Temperature: -50 °C - 260 °C
... contact in drilled holes and has a built-in oil seal. The sensing probe features a copper alloy tip for quick response to temperature changes. Tip-sensitive Thermocouple for use to 260°C (500°F) Spring-loaded ...
MINCO
Temperature: -30 °C - 90 °C
The TF8/E immersion sensor with M12x1 plug connector measures the temperature in the range of -30 up to +90°C in gasiform as well as liquid medium and is with all current sensors available. ...
Temperature: 600 °C
RELIABLE TEMPERATURE MEASUREMENT IN CONTAINERS AND MACHINES Screw-in temperature sensors with housing Screw-in temperature sensors are used in ...
Testo Sensor GmbH
Please specify:
Help us improve:
remaining