|
|
|
|
|
|
|
Hazardous areas often require the use of optical signals for warning or information purposes. The EExII rotating beacon dSLD 21 offers both of these signalling features. It is designed for continuous operation. If the supply voltage is turned on, the rotating beacon dSLD 21 is activated.The device is available in several versions with various levels of operating voltage and and various signallingcolours. The stable, glass-fibre reinforced polyester (GRP) housing is made to the IP66 degree of protection and may be used indoors or outdoors. The II 2 G EEx de IIC T6 protection class enables the unlimited use of the signalling device in all hazardous areas, zones 1 and 2. The flameproof enclosure and the "increased safety" type of protection of the terminal room guarantee hazardous area protection. The upper part of the flameproof enclosure, which contains the electronic and the mounted halogen lamp, consists of a transparent Makroloncap. An inner cap lends colour to the light. The housing consists completely of GRP. Thus the device is protected against corrosion, and fulfills the requirements of contact safety class II. An equipotentiel bonding is not required. All outer fastening parts are manufactured in non corrosive materials.
|
|
IS-L101L L.E.D Beacon
► Zone 0, 1 & 2 Intrinsically safe
► Ex ia IIC T4 (Tamb.-40 to +60°C)
► Alarm accept function (with IS-A105N)
► Can be combined with the IS-A105N alarm
► Sealed to IP66
► ATEX, FM, IECEx
|
|
ActiveLine is designed to indicate various operating states of machines and systems. The possible signalling colours green, yellow, red, blue and white are all shown in one single light element. Each colour can be preset to continuous light, blink light or flash light. The light is generated by use of lightemitting diodes. The model with sounder can also generate a penetrating signalling tone, with four adjustable sound levels.
The plastic housing, the stable foot and the sounder housing are made of impact-resistant thermoplastic. The cap consists of im-pact-resistant polycarbonate, and the stand-tube is made of aluminium.
|
|
The NE series dome shape LED signal light provides increased visibility and years of maintenance-free operation.
* Size: 57mm diameter.
* Available in 24V DC (No polarity).
* Colors available in red, amber, green, blue and clear/white.
* Water and dust-tight IP65 construction.
* Dome is visible from top and sides.
* NPN/PNP open collector compatible.
* Terminal block allows easy wiring.
|
|
The PEW/PES dome shape LED signal light provides increased visibility and years of maintenance-free operation.
* Size: 82mm diameter.
* Available in 24V AC/DC, 100V AC and 200V AC versions.
* Dome is visible from top and sides.
* PEW-B type includes single-tone intermittent alarm with adjustable volume to 85dB at 1m.
* Colors available: red, amber, green and blue.
* Flashing function available in three different flash rates: 60 fpm, 120 fpm, 180 fpm.
* NPN open collector compatible.
* PEW: Meets IP54
PES: Meets IP23 (IP55 with optional rubber gasket SZ-210).
|
|
The RKE/RHE series LED revolving warning light provides increased visibility and long service life with high power LED.
* Size: 100mm diameter.
* Available in 12V DC, 24V DC, 100V AC and 200V AC versions.
* Colors available: red, amber, green and blue.
* RKEB/RHEB series has an integral alarm (high-pitch tone 90dB at 1m).
* No bulb replacement needed with long service life LED, perfect for "hard-to service" locations.
* Dome is made of heat and shock resistant polycarbonate resin.
* IP23 (IP55 with optional rubber gasket SZ-200A).
|
|
The RFV series is a combination of LED rotating beacon light and MP3 programmable sound unit
* Available in 24V DC, 100V AC and 220V AC
* Volume is adjustable from 0 to 95dB (at 1m)
* Colors available: red and amber
* Units are shipped completely pre-wired and pre-assembled
* Voice message or sound data is field-programmable with SD card (SD card
is sold separately)
* Total recording time of 64 seconds (64kbit/s) can be divided up to 4
channels by bit input or 15 channels by binary input
Available by Special Order
* PNP open collector transistor type
|
|
The Spectra range has been designed to offer a complete visual signalling solution for industrial, marine and general applications.
The High output LED multifunction beacon is available in two sizes and allows to choose from a total of 9 user selectable operation modes:
- 4 rotating configurations
- 4 flashing configurations
- Steady mode for status applications
E2S’s wide range of beacons also includes :
- Halogen rotating beacon
- 5J Xenon strobe beacon
- Synchronised Xenon strobe beacon
- Multi-flash-frequency Xenon strobe beacon
- Halogen flashing / status beacon
- Filament lamp flashing / status beacon.
- Different sizes and a range of accessories including wall brackets and pole mounts are available.
|
|
The KHE Series is a multi-feature LED beacon with three selectable light patterns for diverse use. The clear lens makes it easier to see the light in bright ambient conditions.
* Size: 100mm diameter.
* Available in 24V DC (no polarity)
* Dome is visible from top and sides.
* Colors available: red, amber, green and blue.
* Lighting patterns available: simulated rotation, strobing and flashing
* Super bright LEDs provide long service life, maintenance-free operation.
* IP23 (IP65 with SZ-200A optional rubber gasket)
|
|
|
|
|
|
New DA135 Intrinsically Safe LED Beacon from RTK Instruments
RTK Instruments has developed a new range of LED Beacons, which provide powerful visual alarm signals in both hazardous and safe areas. The DA135 is ATEX certified for use in Zone 0, 1 or 2 hazardous areas and is available in five super-bright colours. The ruggedised and encapsulated enclosure makes this an ideal choice for the harsh environments found offshore and in the chemical and petrochemical industry.
The standard unit has a unique method of allowing the user to change the flash rate between single, double or triple flash by triggering control inputs. Customers can then use the same unit to indicate different site problems. A dual colour version is also available where each colour can be triggered separately from the control inputs
The DA135 can be operated alone or in conjunction with an intrinsically safe Sounder and Pushbutton to create a fully featured single point Alarm Annunciator.
RTK Instruments is a leading supplier of safe and hazardous area alarm, display and interface products and can provide specific application advice, as well as product recommendations and installation assistance.
|
|
|
|
|
|
Werma has a vast range of LED beacons with different light signals e.g. permanent light, blinking light and flashing light. Furthermore there is a wide choice of sizes, colours, voltages and fixings available e.g. base mounting, tube mounting and bracket mounting.
This year (2009) a groundbreaking innovation in LED technology has opened up a completely new dimension in optical signalling. Enhanced Visibility System,or the electronic improvement of visibility, EVS for short, is the name WERMA has given to this latest development which promises to bring about a revolution in signalling technology. WERMA employs light emitting diodes for the EVS system. A microprocessor generates random light signals. This gives the light a very "agitated" character which proves highly effective in drawing attention.
Countless uses can be found in the industrial sector, public areas or warehouses.
The LED rotating beacon provides an intensive rotating signalling effect. These LED rotating beacons can provide extremely high light intensity up to 70 cd with low power consumption and high vibration resistance.
|
|
IBL-IBM-IBS
# IBL-IBM-IBS LED-steady-/flashing beacon
# versatile usable panel mount beacon series
# 3 sizes 65 - 45 - 30 mm diameter
# selection of stead-/flashing function via terminal
# maintenance free - long lifetime
# PLC fit (leakage/inrush current)
# particular lens pattern for optimum light dispersion
# adapter for 30,5 mm bore holes
|
|
NFS - 90 mm
# 90mm LED strobe/double strobe beacon
# very good brightness - highest optical efficiency
# specially designed and optimized lens/optics
# up to date LED-technology
# absolutely shock and vibration proof, maintenance free
# long life time approx. 50.000h
# low nominal current
# inrush current limitation, EMC safe, leakage up to 3mA possible
# modular design - mounting options horizontal, vertical and pole
|
|
Range OPTASON: AE&T proposes a broad range of powerful and economic luminous indicators to you to meet your needs for indication in industrial environment: indication of defects, dangers, states, information, etc
Flexible range, you will find many technologies (Led, Flash Xenon, bulb incandescence) and many solutions (encastrables, turnings, angle jigs, etc) to answer the whole of your needs.
Lastly, the high index of protection and the long life of life of our products guarantee to you solutions adapted to your environment and your constraints.
Range:
O50: mini indicator encastrable
Led
Fix, flickering
O100: indicator encastrable
Incandescance, Led, Flash
Fix, flickering
0200/O300/O400: flat-bottomed indicator with accessories of fixing (foot/square)
Incandescance, Led, Flash
Fix, flickering
O350: indicator of indication with fixing angle
Incandescence, Led
Fixed
0300T/O400T: revolving fire
MBL/MB: seeing for very severe environments
|
|
Fires of regularization of the traffic
Plastic fire of high-quality resisting to UV
The reflectors and the lenses are sealed by a joint neoprene.
Diameter of the lenses: 200 mm
Luminous power 60 Watts
Tension: 230 V
1 element: 2 kg L 460 L 260. 335 mm
2 elements: 3,2 kg L 460 L 260. 670 mm
3 elements: 4,7 kg L 460 L 260. 935 mm
|
|
Fire handling is ideal for indication on the machine tools, overhead travelling cranes,
The glass casing is out of orange polycarbonate.
Fire handling is equipped with a double lens of FRESNEL.
Protection against the inversion of polarity.
High index of protection: IP 54
Fixings: 3 bolts, tubes or bases magnetized.
Connection by connector blocks in the base.
Dimensions: High 121 mm, diam. 130 Misters.
O ring between the base and the dome.
Exist in various colors, orange, red, blue, green, transparency and white.
Lamp with Xenon 1.5 joules, longevity: 3 million flashes
The number of glares per minute for a tension of 50V is of 70 Flashes per minutes
Joint anti-vibration included
|
|
|
It is often necessary to use optical signals for warning and indicating purposes in very noisy surroundings. The BLK LED emits clearly recognisable signals. The sturdy housing conforms to protection degree IP 65 and is suitable for both indoor and outdoor use. The signalling light is available in four different cap colours.The modern electronics are mounted on a printed circuit board of glass fibre reinforced epoxy resin. The weather-proof coated aluminium die- kast housing is equipped with a ribbed cap of impact-resistant plexiglass. The signalling light is provided with a M20 cable gland for cable diameters of 8 to 12 mm. Three modes (continous, blinking and flash light) are switchable.
|
|
The IS-mC1 combined alarm sounder & L.E.D. beacon has been designed for installation in intrinsically safe environments (Zone 0). The IS-mini range also includes stand alone intrinsically safe alarm sounders and L.E.D. beacons and is definitely the most effective method of signalling in Zone 0.
Features:
- Zone 0, 1 & 2
- EEx ia IIC T4 (Tamb.-40 to +60°C)
- Maximum 100dB(A) output
- 49 alarm tones, 3 alarm stages
- Array of 6 high intensity L.E.D's
- Sealed to IP65
- ATEX, FM, IECEx
|
|
Sonos Sounder Beacon (DC)
A general purpose electronic sounder for fire, security and industrial applications; the Sonos Sounder Beacon is certified to EN54.
- Simple 'First Fix' installation (no second fix wiring)
- Smooth flow cabling for faster installation
- Quick connect/disconnect
- No locking screw required
- Tone and volume can be preset or adjusted off-base
- Weatherproof to IP65 (deep base units)
- Choice of lens colours
- Low current LED beacon as standard (xenon beacon available on request)
- Sounder and beacon can be controlled separately
|
|
| ... products without technical information |
| |
The IS-mC1 combined alarm sounder & L.E.D. beacon has been designed for installation in intrinsically safe environments (Zone 0). The IS-mini range also includes stand alone intrinsically safe alarm sounders and L.E.D. beacons and is definitely the most effective method of signalling in Zone 0.
Features:
- Zone 0, 1 & 2
- EEx ia IIC T4 (Tamb.-40 to +60°C)
- Maximum 100dB(A) output
- 49 alarm tones, 3 alarm stages
- Array of 6 high intensity L.E.D's
- Sealed to IP65
- ATEX, FM, IECEx
|
|
Sonos Sounder Beacon (DC)
A general purpose electronic sounder for fire, security and industrial applications; the Sonos Sounder Beacon is certified to EN54.
- Simple 'First Fix' installation (no second fix wiring)
- Smooth flow cabling for faster installation
- Quick connect/disconnect
- No locking screw required
- Tone and volume can be preset or adjusted off-base
- Weatherproof to IP65 (deep base units)
- Choice of lens colours
- Low current LED beacon as standard (xenon beacon available on request)
- Sounder and beacon can be controlled separately
|
|
|
|
