|
|
|
|
|
|
The STD Series mounts have been developed to control or eliminate problems of mounting components on PCBs. These include difficulty in maintaining uniform component height currently requiring the use of mounting jigs and fixtures or tubular spacers. Another is the lack of a suitable method of mounting tri-lead devices. Additionally, ordinary tubular spacers used as standoffs do not provide the necessary vertical or lateral component stability, nor do they protect the leads from electrical shorting. All of these shortcomings are addressed by VCC's new bi-lead and tri-lead component standoffs.
Obtaining uniform LED height control on circuit boards is simplified with the use of these mounts that are available in varying lengths from one hundred thousandths of an inch in increments of ten thousandths of an inch.
The design of this standoff allows for the PCB-mounting of single, dual, and tri-lead devices with centers on standard spacing. The STD Series standoff has a cylindrical body with channels for both lead separation and lateral stability. Incorporated in the channels are tabs which retain the component and standoff as a package allowing for preassembly prior to board stuffing and wave soldering. The mounts' molded standoff pads allow for thorough removal of contaminants resulting from the PCB soldering process.
|
|
Features:
- Package: LED Clip for 5 mm LED, black synthetic
- Feature of the device: LED Clip series has been specially designed to work with the 5 mm radial LED from Osram Opto Semiconductors.
Applications:
- This component can be equipped with a 3 mm or a 5 mm LED.
- Several components can be installed in series.
|
|
Bivar's "Award Winning" Optoelectronics Business Unit represents our fastest growing unit serving a wide-range of customers throughout the world. We Offer the industry's largest choice of Discrete and Surface Mount LEDs, LED Mounts / Spacers / Holders, and LED Assemblies, new products include Hi-Brite LED Modules, Flexible Light Pipes and Rigid Light Pipes, and Wedge-Based LEDs.
|
|
|
|
|
|
FEATURES
- Right angle PCB mount for bi and tri-lead LEDs for use as logic and diagnostic indicators.
- Accommodates round and rectangular shapes of LEDs with or without flanges.
- Dove-tail interlock feature allows mounting of both mono and multi-colored LEDs.
- Mount forms LED leads which are locked into position by retaining tabs.
- Formed LED leads are staggered in their length permitting easier PCB insertion.
- Molded standoffs permit the easy cleaning of PCB after wave solding operation.
SPECIFICATIONS
MATERIALS: Housing - Thermoplastic (black) U.L. 94 V0.
MOUNTING: PCH 175 - Right angle thru-hole mount for LEDs. Can be used as a single LED mount or banded together in an array with its dove-tail interlocking feature.
When banded together with the PCH 175 the LEDs are on .250" centers.
LED: 5mm size - round or rectangular shape with or without flange. Bi-lead, standard .100" lead spacing. Tri-lead, either .050" or .100" lead spacing. Both the bi-lead and tri-lead LEDs can also be combined in arrays with one another.
|
|
|
|
|
|
Following its acquisition of the US based LEDCO division of Wilbrecht Electronics, Inc., Microprecision is introducing the popular series of chrome panel mount indicator lights to the European market. Made with a tough reflective, nickel-plated brass housing for 3mm and 5mm LEDs, the indicator lights are ideal for control panels, instrumentation and front panel fault indicators that are exposed to harsh environmental conditions. Equipped with a nitrile gasket/washer and sealed to IP66, the chrome LEDs are suitable for water-tight and high vibration applications.
The rugged panel mount LEDs are available with daylight readable single colours, bicolour, tricolour, and blinking. The products are available with bare pins or wire leads which can be customized with a wide selection of connectors for fast installation in your application. Options include internal resistors for 5-60VDC and 120VAC, black matte housing finish, custom lead lengths and wire types, including avionics grade solution.
For more information please visit our news section on www.microprecision.ch .
|
|
|
|
|
|
APPLICATION - CLIPMOUNT permits the panel display of a PCB mounted LED without its physical attachment to the front panel. This mount enables the use of interconnects between display panels and circuit boards.
VERSATILITY - CLIPMOUNT provides a method of displaying PCB or panel mounted LEDs on a display panel. These mounts are available in either black or clear allowing an LED viewing angle of up to 180 degrees. Mounts are available for both 3mm and 5mm LEDs.
BRIGHTNESS - CLIPMOUNT provides direct viewing of the LED. Mono and multicolor LEDs as well as infrared and photo-detection devices can be mounted in this manner. This design also permits use of either diffused or nondiffused LEDs.
INSTALLATION - CLIPMOUNT are easily installed for PCB mounted LEDs. Simply slide mount thru a 9/32" panel hole and press retaining ring into place. The LED is now able to slide in and out of mount without its physical attachment to front panel. For interconnect applications, hold mount tightly to panel with a nut driver and press connector with LED on from rear.
SPECIFICATIONS
MATERIAL: Mount - Polycarbonate (black - clear) Ring - Polypropylene (black) (U.L. Listed Materials)
|
|
Elliptical, round and square LEDs incorporating selected high performance die ensure that the most demanding application requirements can be satisfied. Water clear, tinted and wide angle diffused as well as Long Life White options are offered.
SMT LEDs
A comprehensive range of surface mount LEDs is also available in 0603, 0805, 1204, 1206, PLCC-2 and PLCC-4 versions.
The complete visible spectrum of colours can be supplied, as well as bi-colour and tri-colour versions.
Applications include background illumination, backlighting, status indication, audio equipment and automotive dashboard displays.
|
|
Features
• Fixed LED in metal-threaded shaft base with removable transparent lens cap
• Replaces the ET-5 and ET-6 incandescent high voltage panel indicators found in control rooms of power plants, sub-stations, and utilities
• Integrated series resistor prevents short circuiting, special fuses are unnecessary
• Can be front mounted or rear mounted to the panel; both nuts & washers can be removed or adjusted — accommodates panels up to 2.2 inches in thickness
• Faster on/off time than incandescent lamps
• LED life of 100,000 hours
• Shock and vibration resistant
• Much lower power consumption, lower energy costs
• No cold filament inrush current
• Only one 21/32 inch hole (0.66", 16.8mm) is required for panel mounting
• 12 inch leads for screw or soldered connections
Options (For large quantities and qualified applications)
• Optional AC voltages: 67Vac, 115Vac, 230Vac
• Optional clear lens cap over color LED
|
|
Features
- 1.0mmX0.5mm SMT LED, 0.5mm THICKNESS.
- LOW POWER CONSUMPTION.
- WIDE VIEWING ANGLE.
- IDEAL FOR BACKLIGHT AND INDICATOR.
- VARIOUS COLORS AND LENS TYPES AVAILABLE.
- PACKAGE: 2000PCS / REEL .
- MOISTURE SENSITIVITY LEVEL : LEVEL 3.
- RoHS COMPLIANT.
Description
The Hyper Red source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode.
|
|
Features:
- Package: rectangular mounting part for 5 mm LED, grey synthetic
- Feature of the device: The rectangular mounting part series has been specially designed to work with the 5 mm radial LED from Osram Opto Semiconductors.
Applications:
- This component can be equipped with a 3 mm or a 5 mm LED.
- Several components can be installed in series.
|
|
3mm Chrome Panel Mount
5mm Chrome Panel Mount
3mm Chrome Panel Mount Recessed
5mm Chrome Panel Mount Recessed
Press-Fit 3mm Panel Mount
Press-Fit 5mm Panel Mount
|
|
|
Elliptical, round and square LEDs incorporating selected high performance die ensure that the most demanding application requirements can be satisfied. Water clear, tinted and wide angle diffused as well as Long Life White options are offered.
|
|
EM20-FPSI 1010
- Red/Green SMART Indicator
- 0 to 30Vd.c. Range
- 2 User Prog. Thresholds
- 1 Control Output
- IP67/NEMA 4X Metal Bezel
The EM20-FPSI 1010 is a ready-to-use panel mounted SMART indicator. This compact LED module indicates green when the input voltage is between two easily programmable levels and red when the input voltage is higher or lower. The levels are easily set and stored in Flash memory. They can be changed as often as desired. This unit can be used in countless applications where a GO / NO GO indicator is required. The module incorporates one output, allowing the user to drive an external alarm or to control the process being monitored. The module uses a metal bezel providing IP67/NEMA 4X protection and screw terminal connectors for easy installation. A 20.5mm (0.81?) diameter panel cut-out is required to mount the unit. For a list of compatible sensors click here. This is a popular part, normally stocked in high quantity and suitable for new designs.
|
|
|
The GLO Series lenses are made from a unique thermoplastic material that diffuses a LED’s light output and dramatically reduces “hot spots”. The result is a clean, hi-tech glow that evenly distributes the light along the lens surface and can be viewed from nearly any angle. Currently, VCC offers the SMB 200, SML 190, CLB 300, and CLF 280 as part of the GLO Series. Custom design inquiries are welcome
|
|
| ... products without technical information |
| |
|
|
|
|
Following its acquisition of the US based LEDCO division of Wilbrecht Electronics, Inc., Microprecision is introducing the popular series of chrome panel mount indicator lights to the European market. Made with a tough reflective, nickel-plated brass housing for 3mm and 5mm LEDs, the indicator lights are ideal for control panels, instrumentation and front panel fault indicators that are exposed to harsh environmental conditions. Equipped with a nitrile gasket/washer and sealed to IP66, the chrome LEDs are suitable for water-tight and high vibration applications.
The rugged panel mount LEDs are available with daylight readable single colours, bicolour, tricolour, and blinking. The products are available with bare pins or wire leads which can be customized with a wide selection of connectors for fast installation in your application. Options include internal resistors for 5-60VDC and 120VAC, black matte housing finish, custom lead lengths and wire types, including avionics grade solution.
For more information please visit our news section on www.microprecision.ch .
|
|
|
|
|
|
APPLICATION - CLIPMOUNT permits the panel display of a PCB mounted LED without its physical attachment to the front panel. This mount enables the use of interconnects between display panels and circuit boards.
VERSATILITY - CLIPMOUNT provides a method of displaying PCB or panel mounted LEDs on a display panel. These mounts are available in either black or clear allowing an LED viewing angle of up to 180 degrees. Mounts are available for both 3mm and 5mm LEDs.
BRIGHTNESS - CLIPMOUNT provides direct viewing of the LED. Mono and multicolor LEDs as well as infrared and photo-detection devices can be mounted in this manner. This design also permits use of either diffused or nondiffused LEDs.
INSTALLATION - CLIPMOUNT are easily installed for PCB mounted LEDs. Simply slide mount thru a 9/32" panel hole and press retaining ring into place. The LED is now able to slide in and out of mount without its physical attachment to front panel. For interconnect applications, hold mount tightly to panel with a nut driver and press connector with LED on from rear.
SPECIFICATIONS
MATERIAL: Mount - Polycarbonate (black - clear) Ring - Polypropylene (black) (U.L. Listed Materials)
|
|
Elliptical, round and square LEDs incorporating selected high performance die ensure that the most demanding application requirements can be satisfied. Water clear, tinted and wide angle diffused as well as Long Life White options are offered.
SMT LEDs
A comprehensive range of surface mount LEDs is also available in 0603, 0805, 1204, 1206, PLCC-2 and PLCC-4 versions.
The complete visible spectrum of colours can be supplied, as well as bi-colour and tri-colour versions.
Applications include background illumination, backlighting, status indication, audio equipment and automotive dashboard displays.
|
|
Features
• Fixed LED in metal-threaded shaft base with removable transparent lens cap
• Replaces the ET-5 and ET-6 incandescent high voltage panel indicators found in control rooms of power plants, sub-stations, and utilities
• Integrated series resistor prevents short circuiting, special fuses are unnecessary
• Can be front mounted or rear mounted to the panel; both nuts & washers can be removed or adjusted — accommodates panels up to 2.2 inches in thickness
• Faster on/off time than incandescent lamps
• LED life of 100,000 hours
• Shock and vibration resistant
• Much lower power consumption, lower energy costs
• No cold filament inrush current
• Only one 21/32 inch hole (0.66", 16.8mm) is required for panel mounting
• 12 inch leads for screw or soldered connections
Options (For large quantities and qualified applications)
• Optional AC voltages: 67Vac, 115Vac, 230Vac
• Optional clear lens cap over color LED
|
|
3mm Chrome Panel Mount
5mm Chrome Panel Mount
3mm Chrome Panel Mount Recessed
5mm Chrome Panel Mount Recessed
Press-Fit 3mm Panel Mount
Press-Fit 5mm Panel Mount
|
|
|
Elliptical, round and square LEDs incorporating selected high performance die ensure that the most demanding application requirements can be satisfied. Water clear, tinted and wide angle diffused as well as Long Life White options are offered.
|
|
| ... products without technical information |
| |
The WME series wall mount LED signal tower light offers seamless integration with most equipment.
* Size: Width 70mm, Depth 80mm
* Available in 24V AC/DC and "Free-Voltage" 90-250V AC versions.
* FB types include flashing circuit and two selectable, single-tone intermittent alarms with large volume up to 90dB at 1m.
* Colors available: red, amber, green, blue and clear/white.
* LED modules are interchangeable and stackable after purchase (up to 5 modules).
* NPN or PNP open collector compatible (24V type), and NPN open collector
compatible (90-250V type).
* Water and dust-tight IP54 construction.
* Units are shipped completely pre-wired and pre-assembled.
|
|
The WE series are Ultra-Slim wall mount signal lights that offer seamless integration with equipment.
* Ultra-slim 37.5mm profile.
* Available in 24V AC/DC.
* Body color is available in ivory white (WEP) and chrome plated (WE).
* FB types include flashing circuit and two selectable, single-tone intermittent alarms with volume to 90dB at 1m.
* LED colors available: red, amber, green, blue and clear/white.
* Units are shipped completely pre-wired and pre-assembled.
* NPN or PNP open collector compatible.
* WE and WEP: Meet IP65
WE-FB and WEP-FB: Meet IP54.
|
|
| ... products without technical information |
| |
|
|
