|
|
The AvaLight-CAL is a spectral calibration lamp. It emits all mercury and argon lines from 254 to well over 965 nm. The major lines and structures are shown on the bottom surface including their relative intensity.
With the standard SMA 905 connector the lamp can quickly be attached to optical fibers, and therefore lends itself to an easy wavelength calibration of fiber optic spectrometer systems.
In the AvaSoft software an automatic recalibration option is included. The AvaLight-CAL can also be delivered in a rackmounted version, to be fully integrated in the 19” rackmount or 9.5” desktop housing.
A PS-12V/1.0A 12VDC power adapter should be ordered with the unit.
|
|
|
The HL-2000-CAL Calibrated Tungsten Halogen Light Sources calibrate the absolute spectral response of a radiometric system. With one of these NIST-traceable light sources and our software, you can determine known absolute intensity values at wavelengths from 350-1050 nm.
|
|
|
A range of broadband IR sources is distributed by Scitec Instruments. These sources operate through the heating of an element so that it emits in the infra-red range. As these devices are broadband, some energy is released at visible wavelengths making them glow.
|
|
The PX-2 Pulsed Xenon Lamp is a high flash rate, short-arc xenon lamp for the UV (220-750 nm), for applications requiring absorbance, reflection, fluorescence and phosphorescence measurements, and especially for measuring optically or thermally labile samples.
The PX-2 operates at speeds up to 220 Hz, offers excellent pulse-to-pulse stability, and has two trigger modes for software control of the flash rate.
|
|
|
|
|
|
The AvaLight-DH-S is a combined Deuterium and halogen light source, which can be used for UV/VIS/NIR applications. The AvaLight-DH-S has a SMA905 connector to be used with fiber optic cables and bundles. For optimal coupling an adjustable focus lens assembly is included. The light source supplies a continuous spectrum with high efficiency and highest stability in the UV, visible and near-infrared range from 215-2000 nm.
The Avalight-DH-S was developed based on the shine-through principle, in which the halogen light is focused through a small diameter aperture in the deuterium bulb.
For UV only applications the AvaLight-D-S source (only Deuterium) is available.
The standard AvaLight-D(H)-S light sources have a special UV longpass filter (>220nm) implemented to protect the fibers from solarizing. For applications that require a spectral range below 220 nm a Deep UV bulb is available, in which no UV longpass filter is included. For these Deep-UV measurements (from 190nm) the AvaLight-D(H)-S-DUV may be ordered.
For all Deuterium Light Sources solarization resistant fibers (-SR) are recommended, for the DUV lamp special solarization resistant fibers (-SR) are required (see the fiber optic section of our website).
|
|
StellarNet Light SL1 -10,000 hour tungsten krypton bulb with 2800 degree Kelvin color temperature for process control and field portable applications from 350-1700nm, 5 minute stabilization, no fans, filter slot for 2x2inch squares. Allows 7-28 VDC input with 0.2% power regulation for bulb. Includes12VDC for120VAC, U.S. plug. Order SL1-BAT option for 5VDC battery input jack. Order SL1-BLUE option for bright blue 470nm LED in place of halogen bulb.
StellarNet Light SL3 - Worlds smallest 4000 hour deuterium light source for continuous wave UV 190-500nm. This lamp is specially designed for maximum stability, and is suitable for process monitor applications. It has an integrated temperature control and measures only 3.5 x 2.75 x 6.5 inches! Integrated filter holder nose cone fits several 0.5" diameter disk filters for various applications (ask about U330-Filter options). Includes power adapter to provide 24 VDC from universal AC input power.
|
|
Fiberoptic Light Sources
This style lighting uses two parts: a light source to create the light and a light guide to carry it to the target. Light sources come in a variety of wattages and bulb styles depending upon the application.
The LSX50 uses a high intensity discharge metal-halide solarc lamp, which offers five times the light output per watt compared to halogen sources. This is the light source best suited for coupling fiber optic cables, as it efficiently launches light into small diamter fiber bundles. It has an ACMI adapter interface, light attenuator and power cord.
|
|
Blackbodies are reference sources used for testing infrared systems. They are required in industry for calibration of pyrometers, infrared line scanners or cameras.
In Defence, they are part of benches for characterisation of complex optronic systems. HGH offers a wide range of blackbodies to cover all Customers’ needs:
- DCN 1000N Differential blackbody for characterization of infrared system performances
- RCN High temperature cavity blackbody for calibration of infrared sensors
- ECN 100 Extended area blackbody for field tests and calibration without collimator
- DCN 1000L Low temperature blackbody
- DCN 1000N Vacuum cryogenic temperature blackbody for space borne systems testing
In addition, HGH have the ability to design specific infrared sources on request.
In many cases, blackbodies are associated to test targets/target wheels and incorporated into infrared collimators (IRCOL).
Contact us with your specifications.
|
|
New LED light source:
- with lithium-storage-battery
- light intensity stepless adjustable
- battery-supplied and rechargeable
- extraordinary compact design (27 x 89 mm, 90 g)
- ACMI-connection - almost unlimited compatibility
- no bulb exchange necessary due to LED technique
- 45 minutes operating time at maximum power
- at least 100 lm light output
- 2 h charge time
Furthermore we offer a lot of other lighting accessory items, aimed at your individual requirements:
Light source metal halide MS-24:
- short arc lamp, 24 watt
- compact design (length=114,3mm, width=83,8mm, length 83,8mm)
- light illumination ≥ 70.000 Lux
Halogen-light source:
- 100 or 150 Watt
- stepless adjustable
Light guides:
- with different diameters and lengths
- with bonded or fused fibres
Further information about the several product groups and their particular advantages you can find on our webpage.
|
|
KARL STORZ only uses cold light projectors with its endoscopic products. With this technology, light from the cold-light projector is transmitted through a fiberoptical or fluid lightguide to the endoscope tip.
Cold-light technology offers many benefits:
• Very bright light
• Heavy-duty, robust technology
• Compact size of fiberoptical lightguide
• Does not contain any significant heat radiation
Cold light is suitable for testing in potentially explosive environments. KARL STORZ cold light projectors are available with a choice of different lamp systems and performance levels, enabling us to provide you with the optimum light source for any conceivable application.
|
|
Xenon light projectors
The light projectors from Richard Wolf GmbH from 180W to 300 W are especially matched to endoscopic applications and are for interdisciplinary use. Automatic light regulation optimises the luminous flux and ensures ideal light conditions.
Our local medical product advisor will be pleased to provide you more details about our products, or simply request our catalogue.
|
|
Bio-Fighter® Triad HO
The Triad HO installs in the heating and cooling system's ductwork and significantly reduces the amount of harmful pathogens such as molds, bacteria, yeasts, and viruses that can develop in these systems. Exposure to UV-C light at the effective level results in DNA destruction in susceptible micro-organisms. For maximum UV-C output, the Bio-Fighter® Triad HO is the product of choice.
The Triad HO features a stainless steel cover, UV-safe viewport, detachable power cord, easy bulb replacement, matched ballast and bulb, and limited lifetime warranty. The Triad HO also incorporates dual safety devices and has earned an ETL safety listing. The Triad HO is available in 120V or 230V models, 16" or 20" bulb lengths, and single or dual bulb configurations. (Consult with a UV-C trained professional for the recommended Bio-Fighter® UETL ListedV-C system to address your needs.)
|
|
FS-2 FLAME SIMULATOR
The adjustable UV and IR sources of the FS-2 simulate a real (non artificial) flame. Just plug in the scanner head and the whole Window 141 system can be tested in the field.
|
|
In contrast to light sources used for illumination, light sources used for measurement applications must provide high stability, reliability and long life. Hamamatsu supplies a variety of stable light sources for chromatography, UV curing, microscopes, semiconductor tools and industrial inspection. Our light sources include xenon, mercury xenon, deuterium, hollow cathode, metal halide and xenon flash lamps. Complete light source packages including lamp, housing and power supply are available.
|
|
SpectraGen 100 SLH light source
Internal halogen light source.
Compact design
Quick, easy and tool-less lamp change
Perfect color rendering
Operates with lamps between 35 W and 100 W
Fiber optics and power connection remain undisturbed during lamp replacement
Low noise fan assisted cooling
Suitable for dry locations only
|
|
he KOHERAS SuperK™ has been the first commercial solution to provide scientists in diverse fields of research with a tool which was previously unavailable. Leading scientific institutions are working with this source and have given invaluable input for further development.
The KOHERAS SuperK™ is now available in four configurations:
SuperK™ Compact - 100 mW average output power from 500 to 2400 nm, typical fixed repetition rate 25kHz, pulse width 1 - 2 ns
SuperK™ Versa - > 1.5 Watt from 490 to 2400 nm, typical fixed repetition rate 40/80 MHz, master-source pulse width ~5 pS
SuperK™ Power - > 2.8 Watt from 460 to 2400 nm, typical fixed repetition rate 40/80 MHz, master-source pulse width ~5 pS
SuperK™ Extreme - > 4.5 Watt from 460 to 2400 nm, typical fixed repetition rate 40/80 MHz, master-source pulse width ~5 pS
|
|
BaySpec’s MiniliteTM Series fiber-coupled Narrowband and Wideband Light Sources are designed to enhance Spectral Domain OCT, Medical Imaging, Fiber Optic Sensing, Analytical Spectroscopy, and Test & Measurement capabilities in the 800nm-1650 nm wavelength region. Devices benefit from low-cost field proven telecommunication components.
Key Features:
- Card-mount or Bench-top Models available
- Fiber optic coupled, wide spectral coverage
- 5V wall power plug-and-play
- Solid state light source, reliable operation in harsh environments
- Operates over wide 0 to +70◦C temperature range
- Operates in high +85% relative humidity environments
- Covers wavelength ranges from 800-1650 nm
|
|
Lumitex Medical Devices creates, manufactures and distributes unique, cool devices for medical illumination. Our mission is to engineer light into sensitive applications that require light without heat or electricity, in user-friendly forms.
Our patented technologies are used to treat jaundice in infants, help surgeons better visualize deep surgical cavities, and provide ambient lighting in surgical equipment and suites.
Our engineering staff works closely with surgeons and medical companies to design the best solution for each lighting need. We apply a variety of unique light-delivery technologies that allow us to optimize trade-offs between flexibility, lighting characteristics and cost.
|
|
|
Medit Inc.’s Portable Superbright LED Light Sources are a convenient alternative to bulky Halogen and Metal Halide light sources, or unfocused LED light handles. Our LED light sources feature a convenient design, high intensity illumination, and low price. They combine reliability with durability by offering a low power 3W LED element, with a specially designed super-magnifying lens. This design allows for ample illumination, on average 28,000-46,000LuX, with low power consumption (3 AAA batteries for 2.5 hours of continuous illumination), and over 1,000,000 hours of lamp life per LED light source.
|
|
Type 1: IR source - 2.5V
The dimensions are 70mm length x 36mm diameter. The source is internally screened by a unique ceramic sleeve. The diameter of the emitter - 6 mm.
|
|
Product Description:
The OL 490 Agile Light Source delivers an unprecedented level of flexibility and power providing high speed programmable spectral illumination. It utilizes Texas Instruments' innovative Digital Light Processor (DLP) technology to offer a programmable and variable high intensity and high resolution spectral output. The OL 490 produces high resolution spectra via a flexible liquid light guide. High speed USB interface and easy to use software controls allow synthesis of complex optical filter systems and rapid spectral rates up to 10 kHz. The OL 490 is also available in the NIR wavelength range.
|
|
|
Portable Xtreme LED light sources are a convenient, easy to use, substitute for bulky halogen or metal halide light sources. These Xtreme light sources feature a high intensity 3W LED, which produces well over 50,000 Lux of illumination, and an adjustable intensity control lever, to vary the illumination for different inspection areas, or areas with reflective surfaces.
|
|
|
The light sources are in fact external boxes which produce illumination intended to clarify the inspection area. These boxes allow a beam of light to pass through a fibre optic to the point to be inspected. At FORT, a full range of sources is available with different types of lamps and levels of power in order to meet the needs of a variety of working environments.
|
|
high intensity light source for endoscopy, video documentation and image processing
Advantage:
highest light intensity and colour realness for continious process control and recognition of smallest defects
|
|
|
MS24 lightsouce is the perfect light source for use with fiberscopes. Its 50/60/400Hz power supply is compatible with requirements for aircraft engine inspections.
|
|
|
|
|
|
The Prior Scientific Lumen 200 Fluorescence Illumination System is a powerful, cost effective alternative to standard 100 Watt mercury and halogen lamphouses.
The combination of Prior's proprietary 2,000 hour life, 200 watt metal arc lamp and two or three meter liquid light guide provide unrivalled versatility and illumination power.
Designed to mount remotely via a two or three meter liquid light guide the Lumen 200 eliminates heat transfer to the microscope, minimising thermal drift and aiding image stability in long term experiments.
2,000 hour life, 200 Watt metal arc lamp
- Remote mounting with two or three meter light guide
- Stabilized DC power supply for consistent illumination
- Quiet operation suitable for laboratory use
- Easy to view display screen for bulb life indication and alarm description
- Knurled light guide clamping knob for secure light guide installation
- Adapters available for all modern research microscopes
- Six position adjustable aperture/intensity knob to protect samples from photobleaching
- Easy bulb replacement
|
|
The OAI stand-alone UV light source systems consist of a stand-alone light source, a constant intensity controller, and a shutter controller.
The Model 30 LS is a highly efficient light source intended for a variety of applications.Light is collected by an ellipsoidal reflector and focused on an integrating/condensing lens array to produce uniform illumination at the exposure plane. This UV light source is available in various beam sizes up to 16 inches and output spectrums from 220 nm to 450 nm. An appropriate lamp included. Output power ranges are from 200 watts to 5 kW. All light sources can easily be equipped with quick change filter assemblies, allowing the user to easily customize the output spectrum. Optional remote exhaust fans are available.
|
|
|
|
|
|
General overview :
The VUV5000 UV source is the most intense He-light source on the market. At the same time, it has the narrowest line width. The photon source is based on a He plasma, generated with the ECR (Electron Cyclotron Resonance)
The VUV5000 UV source includes the following components:
VG SCIENTA VUV5000 UV Source
This is a very high intensity, narrow bandwidth He radiation source with a total VUV flux of more than 2 x 1016 photons/sr s. It includes the VUV5050 source head and the VUV5011 microwave generator. The microwave guide components are also included. The VUV5000 UV-source is optimized for use with the VUV5040 monochromator, but it may also be used stand alone with a capillary VUV light guide to the sample.
Emitted radiation using Helium gas with >99.999% purity:
- 304 Å (41.8135 eV), FWHM 10 %)
- 537 Å (23.08 eV), FWHM < 1.2 meV (~ 8 %)
- 584 Å (21.2182 eV), FWHM < 1.2 meV (~ 82 %)
Guarantee: The VUV5000 UV-source produces 2.0 microA using a 2.8 mm I.D. capillary, -15 V bias and Al photocathode.
|
|
UV lamps with special quality UV filter, long and short wave UV light.
Fibre optic light sources with long life halogen lamp for brilliant light intensity. Intensity control without change in temperature.
|
|
|
Perfectly functioning cold light sources combined with sophisticated fiber-optic light guides meet the demands for the precision optical instruments used in industry, science, medicine, criminology, photography etc.
|
|
|
|
