Power: 150 W
Intensity: 6 A
Torque: 0.4 Nm
... developped series of brushless drives. These precision motors show their characteristic advantages especially as positioning drives for fine-mechanical processing machines or in the field of robotics. The new motor ...
Power: 150 W
Torque: 0.4 Nm
... Kern motor technology fits exactly into the previous portfolio of precision motors, with the best synchronization and low residual torque, two important product features of all Kern motors. POSITIONING ...
Power: 0.33 ch - 15 ch
Torque: 8.86 ft.lb - 223.998 ft.lb
Rotational speed: 1,200, 1,800, 3,600 rpm
Standard Features - IP 56 Rated Protection - 50/60 Hz Capable - 1.15 Service Factor - 9 Lead Dual Voltage - Double Lip Oil Seal on DE & ODE - Inverter Rated 15:1 Constant Torque for VFD use - Multi-mount Removable ...
Techtop
Rotational speed: 10,000, 2,700 rpm
Diameter: 27.5 mm
Operating temperature: -30 °C - 80 °C
The model M70 works with a continuous current; it is available only for low voltage, and for construction, can run into the two directions,changing the polarity of the applied voltage.
Power: 0.06 kW - 315 kW
Rotational speed: 3,000, 1,500, 1,000, 750 rpm
Diameter: 56 mm - 355 mm
Huifeng’s three phase motors are general purpose motors and designed according to IEC 60034. The motors can be customized according to your requirement. •Junction Box is 90° Rotatable ...
Huifeng Motors
Power: 0.25 kW - 2.2 kW
Rotational speed: 3,600, 1,800 rpm
Operating temperature: -10 °C - 40 °C
Huifeng’s NEMA standard series motors are designed in accordance with NEMA MG.1:2016. •Rigid base (Welded on), or C-face with removable reet or round body (footless) are optional •T flange and customized shaft end ...
Huifeng Motors
Power: 0.06 kW - 7.5 kW
Rotational speed: 1,500, 3,000, 1,000 rpm
Diameter: 56 mm - 112 mm
Huifeng’s single phase motors are general purpose motors and designed according to IEC 60034. Designed for “general purpose” use means that these motors can be used in many applications. The ...
Huifeng Motors
Power: 0.12 kW - 4 kW
Torque: 0.6 Nm - 19.9 Nm
Rotational speed: 1,500 rpm - 3,000 rpm
... FULLY ENCLOSED (IP 55) STANDARD ASYNCHRONUS MOTORS Single-phase motors comply with the same standards as 3-phase motors in mechanical terms. The rotating field that creates the motor ...
Gamak Makine Sanayi A.Ş.
Power: 0 kW - 46 kW
Rotational speed: 500 rpm - 5,000 rpm
... accelerating as well as a low noise level. Sample applications: - Mobile tools Drive motors in electric vehicles - Motors for auxiliary drives in ...
Power: 0.5 ch - 3 ch
Rotational speed: 3,600 rpm
... Speed : 3600rpm 8. Frame : S56J; 56J 9. Voltage : 115/208~230V; 208~230/460V; 230V 10. Frequency : 50HZ; 60 Hz 11. ENCL : ODP GW Jet Pump Motors are high quality and perfect performance. The electric ...
Power: 0.25 ch - 300 ch
TECO produces low-voltage motors, including permanent-magnet motors (3-120HP) and inductive motors (1/4-300HP), covering 1E1-1E4, with features of high ...
Intensity: 1 A - 6.4 A
Torque: 0.3 Nm - 110 Nm
Rotational speed: 0 rpm - 833 rpm
... generation from the motor through the use of high-efficiency technology. Requires AlphaStep AZ Series Stepper Motor Driver. • Battery-Free, Mechanical Absolute Encoder • Closed Loop Performance, ...
ORIENTAL MOTOR
Power: 1 ch - 250 ch
Rotational speed: 1,800, 1,200, 3,600 rpm
Operating temperature: 40 °C
... adjustment factors on belted loads • All 2 pole motors are vibration tested on a rigid base yielding smooth reliable operation • Patented bearing cooling system for TEFC motors eliminates the need ...
GE Motors
Power: 250 ch - 1,000 ch
Intensity: 37.9 A - 1,124 A
Rotational speed: 3,600, 1,200, 1,800 rpm
Buying low and medium voltage motors has never been easier. ABB’s N-series general purpose motors combine cost-efficient standardized designs and short lead times with ...
Power: 26.4 W - 80 W
Intensity: 1.65 A
Torque: 0.98, 0.25, 0.73 Nm
... Withdraw Voltage : 500V/5S Rotor Dynamic Balance Standard : 74 IP : IP45 KV Value : KV70 Stall current (A) : 5 Phase to Phase résistance (O) : 3.6 Rated Voltage (V) : 16 Phase to Phase inductance ...
CubeMars
Compact BLDC Electrically commutated motors Compact BLDC are smart actuators with integrated controllers for an increased service life Technical Description: Motor casing:galvanized steel Magnets:rare ...
Power: 0 kW - 2,000 kW
Rotational speed: 0 rpm - 3,000 rpm
... stator IEC size 200 – 500 Performance range up to 2.000 kW Rotational-speed range in operation with VFD 0 – 3000 r/min Voltage up to 1.000 V Standard design: IM B3 (IM1001), IM B35 (IM2001), IM B5 (IM3001), IM V1 ...
Power: 0.55 kW - 22 kW
The compact unit, consisting of motor and frequency converter, offers outstanding cost advantages compared to conventional units: - no costs for drive configuration - thanks to the compact setup ...
VEM motors
Power: 100 kW - 1,000 kW
Diameter: 315 mm - 560 mm
Operating temperature: -38 °C - 40 °C
Dual-speed motors Menzel is one of the few manufacturers of large dual-speed low and medium voltage motors today. We recently delivered two 6000V pole-changing motors ...
MENZEL Elektromotoren GmbH
Power: 113 W - 1,000 W
Torque: 0.36 Nm - 3.2 Nm
Rotational speed: 3,000 rpm
... special build scheme every motor in the GM series is available as a low resistance, i.e. parallel ‘winding’ (designated LR) motor perfectly suited for low voltage, ...
Pinted Motor Works
Power: 0.06 kW - 2,000 kW
type of protection:Safe Area power range:0.06kW to 2000kW frame size:56 - 710 number of poles:2,4, 6, 8 and more ingress protection:IP 23, IP 55 and higher thermical class:155 (F), 180 (H) method of cooling:TEFC, ODP
ATB
Power: 15 W - 200 W
Diameter: 78 mm - 82 mm
FEATURES N° of pole: 2 Duty: S1 - S2 - S3 Protection class: IP20 - IP44 Power supply: 12V to 180V Power output: from 15W up to 200W Brush housing: totally enclosed / fast replacement / external column Upon request: -Electromagnetic ...
AMER
Power: 0.06 kW - 315 kW
Torque: 2.5 Nm - 3,054 Nm
Rotational speed: 925 rpm - 2,990 rpm
... .V3, B35 Voltages 200-690V line and inverter operation Frame construction Aluminium and Cast iron Degree of protection IP55, IP56, IP65, IP66 Température class 155 (F) according to 130 (B) or 180 (H) according ...
Wolong Electric Group
Power: 0 kW - 13 kW
Intensity: 0 A - 300 A
Torque: 0 Nm - 21 Nm
... Maximum Torque output up to 21N*m Cooling Solution: Water cooling Key features: 1. Robust & durable: Outer shell in black anodizing aluminum alloy, prevent against corrosion and oxidation. 2. High performance: ...
Dongguan Hobiba Technology Co.,Ltd
Power: 5.5 kW
Intensity: 11.8 A
Rotational speed: 973 rpm
... F with class B temperature rise • Mounting: B3 - Available B5, B14, B34, B35, V1 on request • Fan: Bi-directional fan • Drive Suitability: Suitable for DOL and VFD • Thermistors: PTC included as standard for VFD applications • ...
Cemp S.r.l.
Power: 11.19 W - 37.38 W
Torque: 0.0155 Nm - 0.025 Nm
Rotational speed: 8,000 rpm - 16,500 rpm
Output shaft of stainless steel. Sintered self-lubricating sleeve Anchor flange: Polyamide 6 with fiberglass Dimension "A": 42 mm - 49 mm Dimension "L": 31 mm - 38 mm
Power: 1,000 W - 600,000 W
Torque: 1 Nm - 10,000 Nm
Rotational speed: 1,000 rpm - 30,000 rpm
CEDS asynchronous motors offer you special advantages: Low maintenance Long lifetime Compact designs Special designs Great overload capacity due to high overturning moment Large field weakening ...
Power: 0.37 kW - 800 kW
IP 55 2-4-6-and 8 poles – readily available in stock from 1 to 630 KW. All our motors are produced to run with frequency drives. Moto-ventilated options available throughout the whole range.
Please specify:
Help us improve:
remaining