|
|
|
|
|
|
Advanced Measuring Multisensor fusion. Fully automated performance with rapid and precise inspection through synchronized CCD camera, TTL Laser, and mechanical sensors. All at reasonable savings
- Near Production Use.
Cost savings by production scrap reduction and through immediate results
- High Precision.
Minimizes measurement uncertainty, while maximizing your manufacturing tolerance window
- Rapid Measuring Speed.
Increases manufacturing confidence by rapid and repeatable measurements of significant sample lots
- Automation Ready.
Further reduce overhead cost by virtually eliminating system operator dependency
Features:
- Compact 3D-CMM
- For rapid optical and tactile 3D Measurements
- Optimal Price-Performance Ratio
- The economical Metrology for your Production Control
- Fast, stepless (1%) motor zoom for fast enlargements without recalibration
Application:
- Small 3D parts from a variety of materials (e.g., plastic connectors, watches, etc.)
- Big size 3D parts with complex features (e.g. metal or plastic housings or injection molded parts, medium turned parts, etc.)
- Flat 2D parts for inspection in backlight (e.g., punched parts, lead frames, etc.)
|
|
SmartScope ATS
The SmartScope® ATS offers high load capacity hydrostatic air bearings riding on precision lapped granite guide members to support heavy parts with large XY travel. A heavy duty granite base provides a low center of mass and high stability.
ATS is equipped with MeasureMind® 3D MultiSensor metrology software for the ultimate in power and 3D measurement capability. Measure-X® metrology software is available optionally.
|
|
|
|
|
|
SmartScope ZIP 250
SmartScope ZIP® 250 sets a high standard in benchtop metrology. This durable system features fast stage speed for maximum throughput and short cycle times, without sacrificing accuracy. A heavy duty cast base with Y-axis center drive assures metrological stability. SmartScope ZIP 250 is available with an optional 300 mm of X-axis travel.
Like all ZIP systems, SmartScope ZIP 250 is equipped with MeasureMind® 3D MultiSensor metrology software and 5:1 AccuCentric® zoom optics. It is ideal for a wide variety of manufacturing industries and locations.
SmartScope ZIP 300
SmartScope ZIP® 300 is a fast, accurate floor model metrology system offering a combination of hardware performance, optical capability, and ease-of-use. Its fast DC servo motor drives propel the stage quickly, reducing cycle times. A rigid cast iron base ensures stability and metrological accuracy. SmartScope ZIP 300 is also available with an optional 300 mm of Z-axis travel.
Like all ZIP systems, SmartScope ZIP 300 is equipped with MeasureMind® 3D MultiSensor metrology software, with Measure-X® optional. An auto-calibrating AccuCentric® 5:1 zoom lens is standard.
SmartScope ZIP 450
SmartScope ZIP® 450 is a floor model metrology system offering video and multisensor measurement for large parts. It has a reputation for extreme reliability and proven metrological performance. Traditionally strong in video measurement, it is also available with contact and non-contact probes, as well as the unique switchable TTL laser.
|
|
Bearings PGI
Taylor Hobson helps bearing manufacturers achieve the extremely tight tolerances required for their demanding applications.
Supporting the industry's inherent need for speed and accuracy, Taylor Hobson offers a dedicated suite of products ideally suited towards these high-precision applications. Combining our Talysurf platform with our highest resolution PGI gauging technology, provides a metrology instrument that is reliable, accurate and flexible, ensuring you have a safe investment for many years into the future. Including Gothic Arch, a full complement of analysis software is available, enabling the user to easily assess component condition against its ideal design. All instruments come with a 45 degree traverse tilting mechanism as standard; a large range of optional styli and calibration artefacts are available to support your most novel need.
|
|
SmartScope CNC 500
The NEW SmartScope® CNC™ 500 offers all the great CNC features and performance in a large travel bridge-design system. Parts move on a precision DC motor-driven Y-axis stage while the optics assembly travels in the X-axis across a stable bridge cross member. This design assures rapid, smooth part translation and robust measurement performance. An extended Y-axis travel of 600 mm is optional.
|
|
|
|
|
|
Our proven SOLO solution has been expanded by new software and calibration techniques. By adding an extra camera the total field of view has doubled to 70x320, opening up for a variety of new applications.
Short object-to-camera distances allow for easy setup in crowded environments and with excellent accuracy. Just point the cameras in the direction of the object to be measured and immediately capture 3D coordinates of the probe touch point.
New technology has allowed us to bring the price down to make it the most cost-effective portable CMM available in the market today.
Metronor has delivered portable CMM systems to the most demanding industries for well over a decade and proven that our systems will deliver superior accuracy where and when required.
- High accuracy on large objects
- No setup - just measure
- Handheld Wireless / armless / beaml
- Flexible and versatile
- Affordable capability
- Exceptional 700 field of view
- Unique solution for shaft alignment
- Ideal for narrow and crowded environments
- ess probing
- Tool certification within minutes
- Facilitating 100% assembly line up-time
|
|
|
|
|
|
SmartScope Flash CNC 200
SmartScope® Flash™ CNC 200 – the smallest member of the Flash CNC family of systems – is a full-featured automatic measurement system. Innovative design features of "elevating bridge" and an embedded computer mean the system takes up little space on a benchtop while providing an ample 200x200x150 mm measuring range and extensive measurement capabilities.
SmartScope Flash CNC 200 has patented innovations that let you do more, and do it faster. The computer controlled LED array backlight tracks X-axis motion of the optics with no moving parts. SmartRing™ light is standard for the ultimate flexibility in surface illumination.
SmartScope Flash CNC 300
A unique high capacity benchtop multisensor measurement system
SmartScope® Flash™ CNC 300 is one of the most versatile benchtop systems OGP offers. With an expansive Z-axis of 250 mm to accommodate large parts, it combines state-of-the-art video and autofocus to deliver high productivity. Add optional through-the-lens (TTL) laser, touch probe or micro-probe to configure a highly capable multisensor system.
|
|
SmartScope MVP 200, 250, 300
SmartScope MVP is a benchtop, automatic, non-contact measurement system with full CNC control for value-conscious customers.
Built on a solid granite base and column, SmartScope MVP provides the kind of performance that has made SmartScopes popular around the world.
Motorized translation stages with precision scales make measurements fast and accurate. Measure-X metrology software allows any operator to achieve repeatable measurements on the most complex parts.
Measure-X is feature-packed dimensional metrology software with an extensive array of measurement tools that emphasize ease of use including intelligent edge detection, user friendly icons and a point and click interface.
Key Technologies
- High quality 6.5 to 1 zoom lens
- Solid, stable, reliable granite structure
- Measure-X metrology software
- 0.5 µm scales in XYZ axes
- High resolution color camera
- Convenient joystick control of all axes
|
|
|
|
|
|
conomical Measuring System for your Production Control
Advanced Measuring Multisensor fusion. Fully automated performance with rapid and precise inspection through synchronized CCD camera, TTL Laser, and mechanical sensors. All at reasonable savings
- Near Production Use.
Cost savings by production scrap reduction and through immediate results
- High Precision.
Minimizes measurement uncertainty, while maximizing your manufacturing tolerance window
- Rapid Measuring Speed.
Increases manufacturing confidence by rapid and repeatable measurements of significant sample lots
- Automation Ready.
Further reduce overhead cost by virtually eliminating system operator dependency
Features:
- Compact 3D-CMM
- For rapid optical and tactile 3D Measurements
- Optimal Price-Performance Ratio
- The economical Metrology for your Production Control
- Fast, stepless (1%) motor zoom for fast enlargements without recalibration
Application:
- Small 3D parts from a variety of materials (e.g., plastic connectors, watches, etc.)
- Medium size 3D parts with complex features (e.g. metal or plastic housings or injection molded parts, small turned parts, etc.)
- Flat 2D parts for inspection in backlight (e.g., punched parts, lead frames, etc.)
|
|
SmartScope CNC 250
SmartScope® CNC™ 250 is a compact machine designed for easy access to the XY stage for maximum fixturing flexibility. Its large 300mm X travel makes it the system of choice for measuring critical dimensions of long parts on a benchtop machine. Its heavy cast base and rigid steel column provide metrology integrity so accuracy is maintained in real world environments.
|
|
SmartScope CNC 1000
The SmartScope® CNC™ 1000 provides a large measurement volume through its moving gantry design. The instrument head traverses a rigid granite rail in the X axis, while the part moved in the Y axis. The entire unit is mounted on a granite base for maximum measurement stability.
Every SmartScope CNC 1000 is multisensor capable.
Whether your needs call for multisensor capabilities now or in the future, SmartScope CNC 1000 is up to the task. Its advanced design allows the additional precision of multiple sensors, including touch trigger probes, micro-probes, and laser scanners. Field retrofits are easily accomplished.
|
|
Ultra Precision PGI Range
Taylor Hobson offer a wide range of metrology solutions to analyse surface form, finish and contour throughout a wealth of industries.
Offering a second-to-none range to resolution ratio, these instruments provide the utmost in both precision and flexibility. Including a complete set of surface parameter analysis tools and filters, the user is able to characterise almost any surface directly against formal ISO standards for form, waviness and roughness.
High precision component contouring is an inherent capability of these instruments, utilising our new Talymap Contour software for the ultimate in visual analysis. In case of any doubt regarding the nature of a component's surface, analysis on a PGI instrument provides the definitive result.
|
|
MarVision PMC 650
Moving bridge type system with Multisensor capability
Multisensor capable 3D Coordinate Measuring Machine provides assured customer quality
- Multisensor technology.
Saves additional investment in optical gages
- Rapid Measuring Speed.
Increases manufacturing confidence by rapid and repeatable measurements of significant sample lots
- A great price to performance ratio
Features
- Moving Bridge type CMM with stationary table
- For rapid optical and tactile 3-D Measurements
- Optimal Price-Performance Ratio
- The precise metrology for heavy work pieces
- Touch probe TP20, optional fixed lens optics and laser sensor
|
|
|
|
|
|
Lab grade Multisensor System. Precision acceptable for lab use, yet built to reside in a typical metrology environment.
- Quality lab standard.
Measurement system providing part certification with the highest level of confidence
- High Precision.
Minimizes measurement uncertainty, while maximizing your manufacturing tolerance window
- Rapid Measuring Speed.
Increase manufacturing confidence by rapid and repeatable measurements of significant sample lots.
Features:
- Bridge type measuring center with stationary bridge and moving table
- Separated electronic cabinet
- For rapid optical and tactile 3D Measurements
- Optimal Price-Performance Ratio
- The economical Metrology for your production control
- Multisensor head with fixed lens optics, optional touch probe and laser sensor
Application:
- Small 3D parts from a variety of materials (e.g., plastic connectors, watches, etc.)
- Precision 3D parts with small tolereances (e.g. injectors, medical parts, etc.)
- Complex turning tools, in combination with rotary and swirelling table (e.g. Drill, milling tool,etc.)
|
|
|
|
|
|
SmartScope ZIP Advance 450
SmartScope ZIP® Advance 450 is a high-resolution, high-accuracy floor model metrology system designed for critical applications and measurement of large parts. Like the benchtop SmartScope ZIP Advance 250, it pairs a 0.5x adapter tube with a 2.0x replacement lens to yield an ample 38 mm working distance and a very large FOV range with unsurpassed imaging resolution. The Vu-Light LED illuminator is paired with the superb Advance optics to provide optimized lighting. Multisensor support, including support for a through-the-lens (TTL) laser, is standard. In addition to offering an XYZ measurement volume of 450x450x200 mm, this system is also available with an optional 610 mm of Y-axis travel, and/or 300 mm of Z-axis travel.
SmartScope ZIP Advance 450 is equipped with MeasureMind 3D® MultiSensor metrology software with full 3D geometric functionality and multisensor support. Measure-X® is available in lieu of MeasureMind 3D.
SmartScope ZIP Advance 250
SmartScope ZIP® Advance 250 is a high-resolution, high-accuracy benchtop video measuring system offering superb video measurement for the toughest metrology challenges. Its state-of-the-art 0.5x adapter tube/2.0x replacement lens combination yields a 38 mm working distance that is nearly 60% larger than that of the standard SmartScope ZIP 250, and an FOV range that is twice as big. This system uses the unique Vu-Light LED illuminator, which is paired perfectly with Advance optics to provide optimal lighting conditions, and also provides through-the-lens (TTL) laser support. SmartScope ZIP Advance 250 is specially designed and configured for verifying critical dimensions of high-tech parts.
|
|
SmartScope Apex
The SmartScope® Apex is the fixed lens video measurement solution for high accuracy applications.
The SmartScope Apex features high-resolution fixed optics for accurate video measurement at fixed field sizes. Its sturdy steel substructure and granite support column enhance measurement stability, and its precise 0.1 µm XYZ scales complete this high-accuracy metrology platform.
|
|
Optics PGI
Taylor Hobson offers a wide range of measuring instrument and software solutions for high value optics applications.
Utilising a modular configuration, these precision instruments are able to offer the ideal aspherics measurement solution to the optics industry, satisfying both immediate and future metrology needs. A complete complement of spheric, aspheric and diffracto-aspheric analysis packages are available, enabling the user to fully characterise virtually any lens / lens mould against its design.
Offering an unprecedented range to resolution ratio, measurement of surface form and finish can be provided in a single trace, removing the need to change styli or repeat measurements. Fully automated operation is available as standard, making these instruments ideally suited towards 24/7 production environments where measurement accuracy, throughput and ease-of-use are all of key importance.
|
|
|
|
|
|
Description:
LINEAR length measuring instruments from Mahr are ideal for use as setting and adjusting instruments in the manufacturing environment. They allow precise setting of internal and external comparators, internal precision measuring instruments, snap gages with displays and many other measuring instruments.
As an infitnitely adjustable measurement standard, the LINEAR series is also an economical alternative to setting gages.
The simple handling and short measuring time are key advantages.
A measuring force control feature can be activated to allow measuring results independent of the user for both internal and external measurements.
Based on the steel scale, the LINEAR series ensures reliable measuring results over the entire measuring range. Compatability with national standards means that LINEAR length measuring instruments are DN EN ISO 9000-compliant.
Applications :
- Setting measuring instruments with displays such as the Multimar 844T
- Setting two-point internal measuring instruments such as the 844 N
- Checking setting standards
- Checking calipers
- Checking inside micrometers
- Measuring cylindrical parts
- Measuring internal dimensions and bores etc.
|
|
The AdData 'G' Plus is a revolutionary non-contact measuring machine for use specifically in the tube bending industry—to obtain data for bending machines and provide information for inspection purposes. The machine utilizes the latest 'G-Tube' technology for non-contact measurement.
In addition to its tube measurement capability, the AdData is equipped for use as a component development tool. A number of features are incorporated to assist in the design of new components including:
* Reverse tube
* Produce a mirror image
* Move bends
* Combine bends
* Split bends
|
|
|
|
|
|
DUO System
A complete and truly portable measurement system consisting of a dual sensor, a probing and a computer system.
Our industry-proven solution has been fused with new technology and design to produce the 3rd generation Metronor portable CMM system. More accurate, more portable and even easier and faster to use than ever. New technology and innovations has allowed us to bring the price down to make it the most cost-effective portable CMM available in the market today.
Whether you are building the best possible aircraft, the highest quality car bodies or a new turbine blade you need exact measurements. Metronor has delivered portable CMM systems to the most demanding industries for well over a decade and proven that our systems will deliver excellent accuracy and functionality.
• Complete and truly portable: One box, 30kg, for complete system including computer and tripods
• Extended probing capabilities including hidden features (450mm with optional Light pen).
• Operator friendly: Probing without beams, wires or arms
• Fast and easy set-up and use.
• No warm-up or leap-frogging required
• No moving parts eliminate re-calibration
• Can be upgraded DUET system
• High-accuracy and flexibility
|
|
Features:
- Portable CMM measures at any location
- Instant tracking technology
- Large measurement volume
- Solid state operation with no moving parts
- Dynamic Referencing
Key Benefits:
Take control to reduce production stops, rework, and scrap
- Measure large objects at any location with a precision system that sets up in minutes
- Perform walkabout measurement without cables, linkages, or beam breaks using lightweight, operator-friendly touch probes
- Reduce multiple setups with the system's large measurement volume
- Measure in confined spaces with the system's small, adjustable footprint
- Measure accurately in unstable environments with Dynamic Referencing (near stamping presses, forklifts, vibrating machinery, etc)
|
|
|
|
|
|
Shop Floor Intra
The Form Talysurf Intra range of product offers shop-floor form and surface finish measurement.
Portability combined with functionality has enabled the Form Talysurf Intra become the instrument of choice for shop-floor surface measurements. A complete set of analytical functions can be provided to suit the exact nature of your application. Features such as: 3D-contour, conic and aspheric form analysis, dual profile and Gothic Arch analysis are just some of the more popular tools available
Form Talysurf Intra
Housed in a rugged enclosure, the Intra has a proven history of maintaining accuracy of measurement without the need for constant maintenance or support. Quality, flexibility and ease-of-use have enabled the Intra become a shop-floor standard across a wealth of different industries. Simple roughness parameters like Ra can be checked, if you need advanced analysis, higher levels of accuracy or greater flexibility, Form Talysurf Intra is the perfect choice.It combines industry leading specifications with simplicity of operation for unbeatable practicality and value.
|
|
|
|
|
|
Features:
MarForm MFU 100 offers performance and possibilities in the reference class which in the past were only possible with much larger investments.
Thanks to its active air-conditioned cabin, the machine can also be used on the shop floor. Shorter distances and a faster intervention into the production process control reduce your costs and optimize the quality of your products.
A high degree of automation is achieved through themotorized centering and leveling table, which is a component of Formtesters, and the use of the motorized T7W probe.
Because of the complete separation of machine control and profile evaluation, the MFU 100 is easily expandable and ready for the future. The addition of other languages or special
evaluations is possible, as well as the implementation of new standards. The MFU 100 is already prepared for the use of new sensor technologies.
The MarWin software package offers all the features of a modern measurement and evaluation software. As a matter of course, impressive records and the electronic documentation on company networks are also available.
- Maximum measuring accuracy
- Software package MarWin
- Future-proof
|
|
|
|
|
|
High Precision Roundness
Taylor Hobson's high precision roundness range of instruments
The Talyrond range of instruments is a culmination of over 50 years of roundness metrology innovation and experience packaged into a range of instruments unsurpassed in versatility and accuracy. Systems include fully or semi automated CNC operation with an intuitive operator interface, making the measurement and analysis procedure a simplified process.
The Talyrond 385 is a fully automated roundness/cylindricity instrument that is unsurpassed in accuracy and reliability, with 6 versions to choose from offering the rightbalance of automation and capacity for virtually every application. State of the art electronics have allowed full control of all axes with fast and accurate modes allowing the right combination of measurement and movement speed for the most challenging of components.
Taylor Hobson's patented arm orientation provides full automation in almost any attitude making it the most versatile of instruments and an industry benchmark in roundness instrumentation.
|
|
Large Capacity Roundness
Taylor Hobson's large capacity roundness range of instruments provide measurement of components such as large diameter bearings or non rotational symmetric components such as engine blocks and other powertrain components. Despite their size and capacity these systems can measure with a degree of accuracy normally associated with laboratory type equipment.
|
|
The flexible shaft measuring system MarShaft CNC inspects shafts automatically with highest precision directly in the production line.
- Automatic measuring process
- Highest flexibility due to nearly no change-over times
|
|
Precision Inductive Range
The Form Talysurf Inductive range of products is the market leading reference instrument for surface finish, form and contour measurement.
The original Form Talysurf, launched in 1984, was the first instrument ever to measure texture, form and contour simultaneously. Now, our newly developed range of Form Talysurf measurement systems has reinforced Taylor Hobson's leadership position and created a new global standard for the assessment of surface finish and form. With a full millimetre of range, a wide selection of interchangeable styli and a patented calibration routine, the inductive systems are ideal for almost all high precision applications.
|
|
|
The new generation of combined roughness and contour measurement systems. The MarSurf XCR 20 is ideal for combining contour and roughness depth evaluation. The roughness software and contour software each have their own user interface. MarSurf XCR 20 is Mahr's top surface measurement system and enables even semi-automated operating sequences such as measuring stand positioning (ST 750 CNC) to be performed with ease.
|
|
Features:
- Simplest to use roundness gage on the market
- Touch Screen user interface
- No keyboard or mouse required
- Precise and fast measurement results
- Mobile due to its low weight and convenient size
- Fast workpiece alignment thanks to computer support
- Centering and tilting screws for rough and fine adjustment
- Suitable for use in workshop since no compressed air connection is required
- Encoders in X and Z feed position directly to the sw (MMQ 100 PLUS)
Application :
- Roundness (also in a sector)
- Flatness (out of one circle)
- Concentricity
- Coaxiality
- Radial run-out
- Axial run-out
- Circular parallelism of top and bottom faces
- Harmonic Analysis
|
|
|
|
|
|
Features:
MMQ 400 can be used in all circumstances for comprehensive workpiece evaluation to DIN ISO 1101. High-precision Z and X measuring axes make it possible to perform any form measuring
task. There are versions of MarForm MMQ 400 for
- High-precision workpieces
- Unusually long workpieces
- Large and heavy workpieces
- Use in production environments or the precision inspection room
You can select between a variety of modules which can be used to customize the MarForm
MMQ 400 to your precise requirements:
- Motor-driven or manual centering and tilting table
- Vertical axis (Z) with measuring length of 500 mm/19.7 ' or 350 mm/13.8 "
- Horizontal axis (X) measuring axis with length of 180 mm/ 7.1 " or 280 mm/11.0 "
- With digital linear scales in X and Z axes
Description:
The MarForm MMQ 400 is available as a 'semiautomatic measuring station' with a manual centering and tilting table or as a 'fully automatic measuring station' which is conveniently fitted with a motor-driven centering and tilting table and the T7W probe. This makes it possible to test parts with high precision without operator intervention. The Marform MMQ 400 Formtester can be used in all applications for comprehensive workpiece evaluation to DIN ISO 1101.
|
|
|
|
