stepper motor / high-speed / 100-230 V / 48 V
stepper motor
SANMOTION PB Series

The Sanyo Denki advance servo systems are designed to encompass the features of the AC servo system and stepping motors ensuring the highest of performance. The extremely compact servo system is capable ...

See the other products
SANYO DENKI America, Inc.
AC motor / five-phase stepper / DC / phase
AC motor
SANMOTION F5 Series

This has a lower vibration rating and a driver and motor for AC and DC input models. The motor base angle is rated at about 0.72o. It covers many vibrating applications. It can run for ...

See the other products
SANYO DENKI America, Inc.
asynchronous motor / 4-pole / three-phase / 2-pole
asynchronous motor
UD, OD series

Power: 60 W - 1000 W

The WEG three-phase/single-phase motors have a voltage of 230/400 V. WEG provides three-phase motors for various voltages up to 575 V. The frequency is set at 50 or 60 Hz. It provides power of 60 to ...

See the other products
WEG Antriebe
asynchronous motor / 4-pole / 2-pole / single-phase
asynchronous motor
UC, OC series

Power: 50 W - 370 W

Single-Phase Motors Type UC, OC Voltage 1) 230 V Frequency 50 oder 60 Hz Power 50 - 370 Watt Number of Poles 2-pole, 4-pole Type of protectio IP 54 Motors for voltages between 110 V and 250 ...

See the other products
WEG Antriebe
stepper motor / two-phase / high-torque
stepper motor
PKP series

Torque: 0.02 Nm - 6.6 Nm

... PKP Series of High-Torque 1.8° Stepper Motors from Orientalmotor are offered in 0.79-in. (20-mm), 1.10-in. (28-mm), 1.38-in. (35-mm), 1.65-in. (42-mm) and 2.22-in. (56.4-mm) frame sizes. The PKP ...

See the other products
ORIENTAL MOTOR
stepper motor / two-phase / high-resolution
stepper motor
PKP series

Torque: 0.25 Nm - 2.23 Nm

The PKP Series Stepper Motor is eqipped with 100 rotor teeth which is twice the number of a standard type stepper motor that has only 50, but nonetheless delivers minimized ...

See the other products
ORIENTAL MOTOR
synchronous motor / permanent magnet / with built-in speed control
synchronous motor
OneGearDrive

Torque: 1.7 Nm
Power: 3 kW
Rotational speed: 3000 rpm

asynchronous motor / three-phase / with integrated inverter
asynchronous motor
VLT® FCM 300

Power: 550 W - 7500 W

... direct EMC compliance in which there is no cable to connect the drive and motor plus it has a built-in RFI filter. This series combines a VLT® frequency converter which is attached in a motor ...

induction motor / three-phase / single-phase / 220-230 V
induction motor
World K/BH series

Power: 1 W - 200 W
Rotational speed: 1000 rpm - 3200 rpm

The Induction Motors (World K / BH) is an electric motor that has a 100/110/115V AC or 220/230V AC power supply with a protection class of IP54 for 200W-type. It has ...

See the other products
ORIENTAL MOTOR
asynchronous motor / reversible / compact / 220-230 V
asynchronous motor
World K series

Power: 1 W - 90 W
Rotational speed: 1000 rpm - 1500 rpm

The World K Series of Oriental Motor's Reversible Motors is built compact, for easy transportation and storage. Its user-friendly structure makes it easy to operate and suitable for areas with limited ...

See the other products
ORIENTAL MOTOR
linear motor / high-speed
linear motor
1FN3

The Siemens 1FN3 motors are linear drives that meet high standards on dynamics, contour accuracy and precision catering a maximum feed force of up to 20,700 N with ultra fast speed up to 836 m/min. They feature superior ...

linear motor
linear motor
1FN6

... the 1FN6 series that are natural and water cooled synchronous linear motors that towers over other linear motors because of its magnet-free secondary section. The 1FN6 linear motors ...

synchronous motor / three-phase
synchronous motor
8LV

Power: 1 kW

The 8LV three-phrase motors have compact and synchronous designs and are capable of providing high performance in small spaces. From B&R, these motors offer fast, automated locking and a power range ...

See the other products
B&R Industrie-Elektronik
synchronous electric torque motor
synchronous electric torque motor
8LT

The 8LT torque motor is designed for modern machines that require precision and dynamics. It provides users with the highest degree of versatility in constructing the equipment. The device is also capable of precise ...

See the other products
B&R Industrie-Elektronik
two-phase stepper motor / two-phase / with control system
two-phase stepper motor
Lexium SD2

The SD2 stepper motor drives come in two power classes of 3.0 Amps and 5.0 Amps. The SD2 stepper motor drives are available as as programmable units for communication ...

See the other products
Schneider Electric Automation GmbH
three-phase stepper motor / three-phase
three-phase stepper motor
Lexium SD3

... software. Its package incorporates a compact drive and high-accuracy motor. The preset reference values are monitored either by a higher-level PC or a Schneider Electric motion controller. ...

See the other products
Schneider Electric Automation GmbH
asynchronous motor / high-efficiency
asynchronous motor
M3BP

Power: 0.25 kW - 1000 kW

ABB's IE2 High Efficiency Process Performance Cast Iron Motor instruments are a distinct kind from other types of cast iron motors because of four main factors: first is their reliability; next, their ...

See the other products
ABB Motors Drives and Power Electronics
asynchronous motor / high-efficiency
asynchronous motor
M4BP

Power: 11 kW - 250 kW

... product has been engineered with leading and newest technology. It can also be customized as per needs and convenience. With motor types of M4BP and frame sizes in the range of 160 to 355, its output range remains 11 ...

See the other products
ABB Motors Drives and Power Electronics
brushless electric torque motor / synchronous
brushless electric torque motor
ST series

Parker's ST series of brushless direct drive torque motors features a continuous torque of up to 235 Nm and a peak torque up to 1161 Nm. It has an impressive speed at 200 to 1500 rpm. The ST series has two motor ...

See the other products
Parker Electromechanical Division
synchronous electric torque motor / brushless / permanent magnet
synchronous electric torque motor
STK series

Power: 30 kW

The STK Series from Parker is a permanent magnet, frameless and brushless direct drive torque motor kit which is designed for applications that require minimal weight and volume but still fulfills the power and torque ...

See the other products
Parker Electromechanical Division
synchronous motor
synchronous motor
MGV series

Power: 230 kW

... gearboxes...). MGV series servomotors include the possibility to generate fast response operation cycles to meet different simulation requirements such as speed in urban or race cycles, speed acyclism of an IC engine, ...

See the other products
Parker SSD Drives Division
synchronous motor / brushless / permanent magnet / spindle
synchronous motor
HW series

Power: 230 kW

HKW Electrospindle Servo Motors are water-cooled and frameless permanent magnet motors that deliver an output power of 230kW, especially designed for spindle applications. Constituent components are ...

See the other products
Parker SSD Drives Division
brushless motor
brushless motor
MaxPlusPlus (MPP)

Power: 500 W - 3000 W

... SERIES Motors come in various sizes of 92, 100, 115, 142, 190, 230, and 270mm with 12 to 1295 in-lbs continuous torque. The motors feature a segmented lamination design with brushless construction ...

See the other products
Parker Electromechanical Automation
stepper motor / three-phase
stepper motor

... inductance of 0.5 to 80 mH AC / 0.2 to 80 mH DC three-phase current manage enables the motor and the drive to jog cooler more than two-phase drives. Choosy resolution equal to 50,800 ...

See the other products
Parker Electromechanical Automation
servo-motor
servo-motor

Going with the servo amplifiers of the JetMove series are Jetter motors featuring DC link voltages of DC 24 to 560 V and a great selection of motor windings. By an appropriate combination you can achieve ...

electronically commutated motor / IP20 / IP 54 / compact
electronically commutated motor
ECblue

Power: 100 W - 6000 W

... external rotor motor Product specification: Electronically commutated (EC) external rotor motor with integrated EC controller Output range 0.10 to 6 kW Voltage ranges 1~200-277V 50/60Hz, ...

See the other products
ZIEHL-ABEGG
AC motor / asynchronous / IP 54 / IP44
AC motor
106

Power: 100 W - 7000 W

AC external rotor motor Product specification: Asynchronous external rotor motors Product portfolio includes 9 frame sizes in the output range 0.1 to 7 kW and 2 versions for flange ...

See the other products
ZIEHL-ABEGG
direct current motor / 12 V / 24 V
direct current motor
D960 series

Torque: 0.19 Nm
Power: 60 W
Rotational speed: 3000, 2900 rpm

... Different voltage and speed ratings available ● Possible to mount a brake, encoder ● Possible to make the customized motor

See the other products
DAEHWA E/M CO.,LTD
direct current motor / pump / 24 V
direct current motor
D723-20B0-YG2

Torque: 0.11 Nm
Power: 23 W
Rotational speed: 2000 rpm

· Application : Inputting pump of grease · Feature : Water proof type

See the other products
DAEHWA E/M CO.,LTD
pump motor / submersible
pump motor
MC4 series

pump motor / submersible
pump motor
MS4 series

synchronous motor / permanent magnet / for the automotive industry / vehicle
synchronous motor

Torque: 60 Nm - 100 Nm
Rotational speed: 425 rpm - 6500 rpm

... application electric motors are directly coupled in wheel’s axis, the differential function is entrust to electronic device. ACM Engineering produced two motors 100 Nm nominal torque at 425 rpm directly ...

See the other products
ACM engineering
electric torque motor
electric torque motor
BRL 240 series

Torque: 3 Nm - 500 Nm
Rotational speed: 1000, 500 rpm
Diameter: 270 mm

Description: These motors are designed for a direct coupling on the machine’s shaft. They have special windings, made with machines designed and produced in our facilities. These motors are designed ...

See the other products
ACM engineering
low-voltage motor / industrial / air-cooled
low-voltage motor
A6C - B6C - B6Q - M6Q series

Power: 0 kW - 355 kW

See the other products
Marelli Motori S.p.A.
low-voltage motor / industrial / air-cooled
low-voltage motor
A5C - B5C series

Power: 0 kW - 1900 kW

See the other products
Marelli Motori S.p.A.
vibration motor
vibration motor
EVM series

See the other products
KEM-P VIBRATION MOTORS
single-phase motor / industrial / vibration
single-phase motor
EVM/M series

Power: 80 W - 500 W
Rotational speed: 1500 rpm - 3600 rpm

See the other products
KEM-P VIBRATION MOTORS
synchronous motor / for lifting applications / traction / gearless
synchronous motor
WSG-TR

... approx. 500...1200 kg (2:1) nominal speed: from 0.5 to 1.6 m/s (2:1) fulfillment of all Lift Directive and EN specifications EC type-examination certificate

See the other products
WITTUR
synchronous motor / for lifting applications / traction / gearless
synchronous motor
WSG-S1.5

... load: approx. 900...1400kg ( 2:1) nominal speed: 0.5 bis 2.0 m/s (2:1) fulfillment of all Lift Directive and EN specifications EC type-examination certificate

See the other products
WITTUR