|
|
Application:
•Decentralized motorization of loads < 500kg (cardboard boxes, trays, totes…) for conveying systems where there is no risk of accumulation
•Regulation for speed in gravity roller conveyors, access gate, bridging between conveyors, 90° transfers, powered roller bends…
•Applicable to all industries (automotive, electronics, mail …) for assembly lines and transfers
Benefits:
•Safety (no exposed transmissions)
•Comfort/Ecological (without oil bath)
•Modular & flexible conveyor zones
•Space saving
•Quick and simple installation removing the need for maintenance (no exposed transmissions)
Concept and characteristics:
•The AC asynchronous motor and the life lubricated planetary gears and bearings are integrated inside the roller tube to drive the loads directly
•Internal shock absorber protects the gearbox
•Continuous or intermittent duty cycle (720 start-stop/hour)
•Speed from 4 to 50 m/min
•IP54, 55 and 65, clean room
•1phase or 3 phase, 50 or 60Hz, from 100 to 440V
•option : accumilation motor or brake motor
AC 1phase & 3 phase range:
•Ø 50 standard: series K
•Ø 57 standard: series A
•Ø 60.5 standard: series B |
|
Concept and characteristics:
• The brushless 24V DC motor 1 and the life lubricated planetary gears and bearings 2 are integrated inside the roller tube 3.
• A circuit board drives the motor offering different control options (see “circuit board” section)
• Suitable for a host of environments: industrial, humid, dusty, wet, oily and clean rooms (IP54, 55 & 65)
• Continuous or intermittent duty cycles (1800 start-stop/hour)
• Speed range from 4 to 65 m/min
• Speed variation: see “circuit board” section
• Available with dynamic break and mechanical brake |
|
A drum motor is a motorized pulley where the body rotates around a stationary shaft. The rotating outer drum becomes the drive pulley which powers the conveyor belt.
In simple terms it is a highly efficient geared motor, totaly enclosed within a steel shell. Unlike conventional drive systems, the BDL drum motor has no chains or V-belts to tighten or replace, no sprockets to align, clean or lubricate, no bearings to grease, and does not require chain guards. lt is a simple - yet small and powerful - integral motorized pulley that is guaranteed to power your belt conveyor for years without breakdown. All gearing is made of high alloy steel, not plastic. The BDL drum motor is lubricated for life and needs no oil change. The result, almost no maintenance or downtime, which means lower costs and higher productivity. |
|
Type 840-50
The Rollex Motor-Roller 50 is the solution for your automation. Parcels and small boxes up to 520 N can be transported with a high reliability. The compact control board guarantees simple installation and the low working noise makes working stress-free.
If in Pharmaceutical-, Food-Industry or Mail Order Business, the Motor-Roller transports your goods fast and reliable.
Speeds from 0,2 up to 1,3 m/s
Load Capacity max. 520 N
Temperature 0°C bis 40°C
Torque up to 1,8 Nm, low noise
Integrated Motor regulation, reverse drive possible
Small, extern connecting-box with integrated speed regulation
Controlled Safe-Off with reconnection
Type 850 - 89
The Motor-Roller is driven by an oil-cooled motor, that guarantees long life. The motor can be build with an intern or extern magnetic break that will be mounted with another conveyor roller of that section.
The Motor-Roller Type 850-89 is a Power Pack. With this Motor Roller pallets of 1000 kg can be transported. The drive system is especially for low construction heights, turn-tables and tramming cars.
|
|
Application:
•Decentralized motorization of light weight loads or loose product on belt conveyors
•Applicable to all industries (automotive, electronics, mail …) for transfer lines
Benefits:
•Safety (no exposed transmissions)
•Comfort/Ecological (without oil bath)
•Modular & flexible conveyor zones
•Space saving
•Quick and simple installation removing the need for maintenance (no exposed transmissions)
Concept and characteristics:
•The AC asynchronous 3 phase motor and the life lubricated planetary gears and bearings are integrated inside the roller tube to drive the belt directly
•Continuous or intermittent duty cycle (360 start-stop/hour)
•Speed from 5 to 40 m/min
•Speed variation possible using a frequency inverter
•IP55 and 65
•Without oil bath
•3 phase, 50 or 60Hz, from 230 to 415V
AC 3 phase range:
•Ø 76.3: series CN
•Ø 115:series IP |
|
| A drum motor is a motorized pulley where the body rotates around a stationary shaft. The rotating outer drum becomes the drive pulley which powers the conveyor belt. |
|
| A drum motor is a motorized pulley where the body rotates around a stationary shaft. The rotating outer drum becomes the drive pulley which powers the conveyor belt. |
|
| ... products without technical information |
| |
Nexen offers an advanced new technology that revolutionizes linear motion. The Roller Pinion System (RPS) provides zero backlash, very high positional accuracy, unlimited length, very high speeds, 99% efficiency, high rigidity, low noise, low maintenance, corrosion resistance, and long life. This opens up
new design possibilities and provides the capability to achieve much higher levels of performance in machine designs.
The RPS's unique design eliminates many of the limitations of current linear drive systems like:
Ball Screws: Limited by critical speed, maximum speed, cumulative error, vibration, thermal expansion, supplemental cooling, noise, low efficiency, maintenance, and life.
Traditional Rack and Pinion: Limited by low accuracy and speed, backlash, tooth fatigue, noise, high cost of dual and split pinion systems, high maintenance, and short life.
Belt Drives: Limited by low accuracy, backlash, low load capacity, short lengths, belt stretch, and low rigidity.
Linear Motors: Limited by low load capacity, high cost, strong magnetic fields, and liquid cooling.
|
|
CB02N/CB02P :
These circuit boards are used to drive and protect brushless motorized rollers.
Motor torque depends on the speed variation required
Functions:
- Motor Run/Stop
- Selection of the direction of rotation of the motor
- Stopping with dynamic brake
- Error signal
- Variable speed
- NPN logic with CB02N / PNP logic with CB02P |
|
Three driving rolls
- Pyramid style design
- Bending capacity: pipe up to 4"; angle up to 80x80 mm (3"x3")
- Hydraulic adjustment of bending roll
- Combination horizontal-vertical working position
- Mechanical positive stop for consistent repostioning
- Digital readout |
|
| ... products without technical information |
| |
The quietly running elero drives are reliable, durable and maintenance-free. They offer you the comfort of operating your roller shutters or awnings automatically by pressing a button instead of via crank drives or belts. The easily installed tubular motors can be fitted into shafts from 40 to 98 mm. They require very little space and are protected against overload by a thermal protection system.
|
|
|
|
