Operating temperature: -40 °C - 260 °C
Flash point: 300 °C
... to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used ...
CAIG
Operating temperature: -40 °C - 260 °C
... to surfaces. Additional additives allow it to displace moisture, prevent oxidation and corrosion and provides superior lubrication and protection. DeoxIT® L260 Grease’s unique properties allow it not only to be used ...
CAIG
Operating temperature: -26 °C - 150 °C
... spray). DeoxIT® FaderGrease is a precision lubricating grease and for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces). It replenishes lubrication ...
CAIG
Operating temperature: -45 °C - 232 °C
Flash point: 220 °C
... patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant ...
Synco Chemical Corp
Viscosity: 0.000024, 0.000155 m²/s
Pour point: -48 °C
Flash point: 238 °C
... evaporation a high and very stable viscosity index a good resistance against shearing a high resistance against aging a safe lubrication film at low and very high temperatures a very good detergency and dispersion ...
... residues. Its dielectric characteristic restores contacts to their initial efficiency and protects them during operation. LUBRICANT Effectively and durably lubricates all mechanisms, protecting them from wear and degradation ...
arexons
Viscosity: 0.000129, 0.000019 m²/s
Pour point: -46 °C
Flash point: 243 °C
IGOL RACE FACTORY 0101 10W-50 is a 100% Synthetic Ester and PAO based engine lubricant, specially formulated for powerful, sporty, high speed engines. Improves power by reducing friction and wear. Suitable for petrol ...
IGOL
Operating temperature: -45 °C - 130 °C
Pour point: 230 °C
Flash point: -45 °C
... Contact Grease is a part of the CG series of Contact Lubricants which are an extension of the extremely popular 2X range. CG52B Electrical Contact Grease is a part of the CG series of Contact Lubricants ...
ELECTROLUBE
Stainless steel maintenance oil Ready-to-use, pure protection and care oil for stainless steel, aluminium and non-ferrous metals. It leaves a slightly gleaming film on the surfaces that protects from fresh contamination. Subsequent ...
Bio-Circle Surface Technology GmbH
Operating temperature: 20 °C - 25 °C
High-Performance Anti-Rust Oil provides effective long-term corrosion protection, efficiently protecting machine parts and metals from environmental impacts, such as water or air, during machining processes and storage. Reliable long-term ...
Bio-Circle Surface Technology GmbH
Operating temperature: 150 °C
... consumer goods. Wherever food products might get into occasional or technically unavoidable contact with lubricants in foodstuffs production, only lubricants that have been certified by the NSF under ...
Bio-Circle Surface Technology GmbH
Semi-synthetic cutting fluid for cutting and rectification operations on all kinds of metals (steel, copper, aluminum, stainless steel, etc.). This cutting fluid provides a significant extension of the life time of cutting tools and ...
CRC Industries France
Short-term corrosion inhibitor. Indoor protection up to 6 months. Multipurpose corrosion inhibitor with water repellant and lubricating properties. Forms a thin, almost invisible and long-lasting protective film against ...
CRC Industries France
Multipurpose marine lubricant and corrosion inhibitor Multipurpose marine lubricant and corrosion inhibitor. Paraffinic oil and a multiple organic inhibitor system that prevents rust and corrosion ...
CRC Industries France
REMS Spezial – high-alloyed mineral based thread-cutting oil, can be washed out with water. High lubricating and cooling effect. High-alloyed mineral based thread-cutting oil. For all materials: steel, stainless steel, ...
REMS
Operating temperature: -40 °C - 1,400 °C
High compression resistant, metal-free assembly paste Excellent corrosion protection Salt water resistant Can also be used for ABS systems
STALOC
Operating temperature: 30, 49 °C
... Sprayidea Sewing Machine Oil is a multi-purpose lubricant, used for lubricating hardware, machine tools, sewing machine, metal parts, plastic mold, etc. 1.Anti-rust & moisturizing; 2.Rust removing, ...
Dongguan Dayang Aerosol Chemical Technology Co., Ltd.
Operating temperature: 30, 49 °C
Advanced silicone thread oil,lubricant sewing thread like cotton,silk,polyester,etc.eco-friendly,odorless. Item NO.:JIEERQI PP0-188 Order(MOQ):1200 Payment:L/C, T/T Product Origin:Guangdong, China (Mainland) Color:white Shipping ...
Dongguan Dayang Aerosol Chemical Technology Co., Ltd.
Operating temperature: 49, 30 °C
Mulitipurpose anti rust lubricant,metal maintenance agent,metal parts,electrical equipment,low odor Item NO.:SprayideA DY-40 Order(MOQ):1200 Payment:L/C, T/T Product Origin:Guangdong, China (Mainland) Color:white Shipping ...
Dongguan Dayang Aerosol Chemical Technology Co., Ltd.
Viscosity: 0.000105, 0.000014 m²/s
Pour point: -35 °C
Flash point: 220 °C
Lukoil Lubricants GmbH
Operating temperature: -50 °F - 3,000 °F
A synthetic, dry-film, ceramic lubricant formulated to reduce brake noise and vibrations by dampening all brake vibrating frequencies. Will not run off or wash out. Works in extreme temp ranges from -50 to 3000°F. ...
CRC Industries
Operating temperature: -30 °C - 130 °C
... soap grease for the lubrication of rolling and sliding bearings at higher temperatures and extreme pressure. Besides corrosion and oxidation protection additives, it contains EP additives which give this grease optimum ...
BIZOL
Operating temperature: -35 °C - 210 °C
Viscosity: 0.000011 m²/s
highly oxidation-resistant multi-purpose oil especially developed for professional use of tractors, construction vehicles and similar vehicles optimal frictional properties BIZOL Pro 10W-30 Tractor Oil UTTO is a sophisticated multi-purpose ...
BIZOL
Operating temperature: 210 °C
Viscosity: 0.00046 m²/s
EP lubricants with outstanding lubricating and wear protection properties. Produced from high quality base oils and the most modern sulphur-phosphorus additives. Suitable for use in industrial gears, ...
BIZOL
... important as the lubricant itself, as well as the whole implemented mixing / distribution / spraying system. The optimization of the whole system is indissociable and allows in short / middle term : a reduction ...
SOGELUB
... directly on the scoops, at the first contact point of the gob with the delivery system. The lubrication of these systems can be set up with different types of lubricants, wether neat, emulsifiable into ...
SOGELUB
First, these lubricants act as a release agent, preventing the hot glass from sticking to the mould. In order to develop this product range, SOGELUB® initiated a technical survey about the needs and expectations of the ...
SOGELUB
Operating temperature: -30 °C - 288 °C
Viscosity: 0.000008 m²/s - 0.00045 m²/s
... compatible with other PFPE/PTFE greases but PFPE lubricants should not be mixed with other common types of lubricants. Because of the inert, nonoxidizing nature of the ingredients, Krytox grease and ...
Miller-Stephenson Chemical Co
Operating temperature: -30 °C - 288 °C
Viscosity: 0.000008 m²/s - 0.00045 m²/s
... below . Under the D-3336 test conditions , the majority of competing hydrocarbon lubricants fail in less than 1,000 hr. But, the general-purpose line of Krytox lubricants has been shown to last over 5,000 ...
Miller-Stephenson Chemical Co
Operating temperature: -30 °C - 288 °C
Viscosity: 0.000006 m²/s - 0.00045 m²/s
Krytox™ Anticorrosion GPL 220–227 greases are white greases that contain sodium nitrite. These grades provide rust protection at ambient temperatures, corrosion protection at high temperatures, and anti-wear protection. The grease additives ...
Miller-Stephenson Chemical Co
... permanently lubricating, high-performance grease for all moving parts, sliding parts and friction surfaces. A perfect adhesive lubrication for chains, gears, hinges, guide rails and ball bearings...The article is available ...
Wekem
Sewing machine oilArt.No.: WF-48WF 48 is a special oil which is used to lubricate and preserve sewing machine parts, e.g. slides, spindle joints, etc. Excellent penetration when applied.The article is available in the following package ...
Wekem
Operating temperature: -40 °C - 200 °C
Silicone grease with PTFE for changing temperature loads, e.g. easier start-up at low temperatures and continual pressure in the range of -40°C to +200°C. Suitable for metal, plastic, rubber compounds. NSF Class H1 certified. Neutral ...
Wekem
Pour point: -45, -42, -39 °C
Flash point: 204, 192, 197 °C
... compressor oils are formulated to deliver up to three times longer oil drain intervals than other synthetic air compressor lubricants. In fact, Mobil SHC Rarus oils have even demonstrated the ability to perform for up ...
ExxonMobil Lubricants & Petrol Spec
free of HP additives medium proportion of HP and wear protection additives high proportion of HP and wear protection additives high proportion of HP and wear protection additives (Gas to liquid)
Blaser Swisslube
Operating temperature: -20 °C - 150 °C
Grease spray formulated for the lubrication of open gears, chains and other transmission elements subject to heavy loads. Adhesive grease in aerosol form intended mainly for the lubrication of open ...
CONDAT
Operating temperature: -20 °C - 130 °C
... -synthetic H1-aluminium-complex grease for the food and pharmaceutical industry Application Especially designed for lubrication of machinery and equipment in the food and pharmaceutical industry where incidental ...
Setral Chemie GmbH
High-performance, low-viscosity formulation reduces up to 90% of pneumatic maintenance costs; dec reases downtime, improves productivity. Cleans, protects, and prolongs the li ...
A.W. Chesterton Company
... emulsion and neat oil applications. Double Cold Reduction Lubricants Specialty water-emulsifiable lubricants used in the secondary reduction of tinplate. Commonly referred to as DCR or 2CR lubricants.
Operating temperature: -20 °C - 250 °C
MOLYDAL
Operating temperature: 40 °C
Viscosity: 9.8, 40, 2.7 m²/s
... quantities of lubricant oil, especially suitable for aluminum, tin, copper, alloy material such as cutting, shaping, drilling, milling, turning and grinding processing。 Atomization effect is good, good biodegradability. ...
Boer Technolog Co., Ltd.
Please specify:
Help us improve:
remaining