|
|
Used in control loops with neutral and aggressive media in chemical and process industries. Exact control of the valve opening is assured by positioners (pneumatic or electropneumatic). As a standard the valve is equipped with an integrated top-mounted positioner.
|
|
Integral-passage slide valves are suitable for all those uses where perfect tightness has to be assured both to material (VLPM/ VLPC/VLPP) and pressure (VLRM/VLRC/VLRP) even in the presence of high temperature and with abrasive products.
They are used for powders and granules under silos, hoppers, batchers and screw conveyors.
Anyhow our technical service is at your complete disposal to meet any requirement.
- Valves are suitable for tightening between counterflanges UNI-PN 10 or ANSI 150 lb.
- Interior tightness is assured by a toroidal gasket acting on the blade in closed position ((VLRM/VLRC/VLRP).
- Tightness towards the outside is assured by an adjustable packing gland system.
- The manual valve control is achieved by a handwheel (VLPM/VLRM) and by a pulley with chain (VLPC/VLRC)
- The electropneumatic valve control is achieved by a double-effect cylinder activated by 1/4" Gas 5/2 single solenoid valve.
- Two proximity inductive limit-switches ø 18 are used to remote-indicate the blade position.
- Electropneumatic slide valves in special execution may be supplied with 3 positions for course / fine batching on balances.
- Electropneumatic slide valves are designed and manufactured in compliance with Community Regulations 89/392/EEC. |
|
SLIDEVALVE ONLY
• Frame and slidevalve with great thickness
MOTO REDUCTOR CONTROL
• 0.37 kW
• 137 rpm
• Voltage TRI 230/400 V - 50 Hz IP55
• Screw D20 - Pitch 12 mm
• 0.37 kW - 137 rpm
• Voltage TRI 230/400 V - 50 Hz IP55
END OF STROKE
• Set screw on slidevalve main part
D 18 T 10/36 V DC
INDUCTIF
• Set screw on slidevalve main part
D 18 T 10/36 V DC
|
|
| Fabri-Valve products (knife gate, slide gate, wedge gate, recycle/reject, butterfly, and check valves) are proven performers for handling process fluids for the pulp and paper, chemical, petroleum, refining, mining, waste water, power, oil sands, and marine industries. Fabri-Valve products can be custom designed to provide economical, dependable solutions for your processing needs. We believe that there is no such thing as a standard valve or a standard job. Based upon our long-standing and diverse valve construction experience, Fabri- Valve can demonstrate a host of options and will customize the exact valve for your exact requirements. We understand the rigors of the fluids, gases and slurries that flow through your piping systems. Our valves substantially reduce downtime and maintenance costs and consistently outlive their payback period. |
|
Whatever you want from a Bulk Materials handling valve you’ve got it with Clyde Materials unbeatable Dome Valve® - the cost effective valve solution.
The Clyde Dome Valve®, widely regarded as the original and best material handling valve in the world, offers exceptional life from only a single moving part. The Dome Valve® is recognised as a low maintenance, long life solution that can last at least 1 million cycles between maintenance inspections. It has the ability to cut through static or moving columns of material and is pressure-tight, ensuring a consistent pressure tight seal is created when the valve is in the closed position, but in the open position it provides an unrestricted full bore opening for the best product flow characteristics possible. The Dome Valve® can also be used as a line, vessel or reactor isolation valve.
The Dome Valve® enhances other technologies from Clyde Materials Handling, a leading provider of pneumatic injection, conveying, materials handling & vacuum cleaning solutions.
The solutions we create for our customers generate many benefits and are backed by three decades of domain knowledge, expertise and a track record of generating exemplary success.
Dome Valve® sold in the United States under the trade name ‘Spheri Valve’ |
|
SLIDEVLAVE ONLY
• Frame and slidevalve with great thickness
PNEUMATIC DRIVE
• 2 exhaust reductions
• Distributor 5/2 - 1 EV 48V ALT
• Power supply D 6/8
END OF STROKE
• Fixed on cylinder
D 18 T 10/36 V DC
MAGNETIC
• Fixed on cylinder
INDUCTIVE
• Set screw on slidevalve main part D 18 T 10/36 V DC
|
|
SLIDEVALVE ONLY
• Frame and slidevalve with great thickness
RACK MANUAL CONTROL
• M3 rock outside of the dust flow
• 18 teeth sprocket
• Handle drive
END OF STROKE
• Set screw on slidevalve frame
D 18 T 10/36 V DC
|
|
Unival Ported Gate Valve (PGV)
Product Description
Major Markets: Mining, Paper, Power, Chemical
Design Features: Innovative, pressure-assisted sealing system utilizes elastomer sleeves with radial and gate thrust support rings. Design features include streamlined flow passage, bi-directional shutoff, adjustable packing and rounded gate edges. Stem protection and actuator lockout device are standard.
Size Range: 2 - 24" (50 - 600mm)
Temperature Range: to 400°F (204°C)
Pressure Rating: 150 psi (1030 kPa) CWP
Valve Style: Ported gate valve, wafer
Body Materials: Ductile iron, 316 stainless steel
Actuator Type: Handwheel, chainwheel, pneumatic and hydraulic cylinder, electric motor
|
|
KGC Cast Stainless Steel Knife Gate Valves
Major Markets: Paper, water, wastewater, chemical, power, steel, mining
Design Features: DeZURIK Cast Knife Gate Valves (KGC) are designed for on-off and throttling applications. They feature a cast body in 304, 316 or 317 stainless steel. The gate material is 304, 316 or 317 stainless steel. The packing gland is stainless steel for corrosion protection or coated carbon steel for non-corrosive service. The stem is stainless steel. The yoke is available in 316 stainless steel for corrosive service or carbon steel for non-corrosive service.
Size Range: 2 - 36" (50 - 900mm)
Pressure Rating:
2–24" (50–600mm) - 150 psi C.W.P. (1030 kPa)
30 & 36" (750 & 900mm) - 100 psi C.W.P. (690 kPa) on liquids and gases
Actuator Type: Handwheels, Chainwheels, Bevel Gears, Levers, Pneumatic and Hydraulic Cylinders and electric motors.
|
|
KGU Urethane Knife Gate Valves
Major Markets: Mining
Design Features: One-piece cast-in-place urethane liner designed especially for handling abrasive slurries and dry materials in the mining industry. Rugged stainless steel gate, long-life packing, stainless steel stem, corrosion resistant yoke sleeve, and heavy duty superstructure.
Size Range: 4 - 24" (100 - 600mm)
Temperature Range: -40°F to 130°F (54°C)
Pressure Rating: 150 psi (1030 kPa) CWP
Body Material: Cast iron with gates of 304, 316 stainless steel
Valve Style: Urethane lined knife gate valve, wafer
Actuator Type: Lever, handwheel, chainwheel, cylinder, electric motor
|
|
Standard Type A :
Universal knife gate valve, unidirectional for various industrial application, i.e. sewage water-/ power plants, paper-/ food-/ beverage-/ chemical-/ powder industry.
For other special applications other types are available
Silo-hopper valve, valves with through going slide and bonnetted housing.
Flanges as per DIN PN10/16, ANSI or per request.
Motions : Handwheel, pneumatic actuators, electro-mechanical actuators.
Accessories : for example limit switches, solenoid valves can be mounted upon request.
Diameters : DN 50mm-1000mm, other upon request.
|
|
KNIFE GATE VALVE TYPE MV
FEATURES
- Box packing TwinPack gives high operation reliability
- Easy replacement of seat by mecanically locked retainer ring
- Low maintenance
- Can be disassembled, material specifi c recycling possible
GENERAL APPLICATIONS, e.g.:
- Sludge, powder, granulates and other solid media
- Pulp, recycled pulp
- Waste water
- Food industry
- Breweries and beverage industry |
|
| ... products without technical information |
| |
|
|
see the results for the following category