Flow: 0.001 l/min - 0.485 l/min
Pressure: 0 bar - 2 bar
Head: 2 m
... 485ml/min.(For intermittent work only) 300RPM supports continuous working mode Easy to operate, can quickly replace the pump tube; High precision, low noise, simple structure, maintenance-free Two tube clamp ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.6 l/min - 1 l/min
Fluid temperature: 0 °C - 40 °C
Input diameter: 6.4 mm
KPHM600 series peristaltic pumps are 2 types of motor driven peristaltic pumps, 24V/12V motor, different voltage options available Pump tube selection: the pump tube ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 0.2 m³/h - 0.26 m³/h
Fluid temperature: 0 °C - 40 °C
Input diameter: 3.2, 4 mm
★ Compact structure ★ Suitable for viscous, non-viscous liquid transfer ★ Exquisite high-end appearance, color can be customized ★ Plastic gear drive, cost-effective ...
Kamoer Fluid Tech (Shanghai) Co.,LTD.
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... direct priming for medium viscosity products use: transfer / pressure delivery PERFORMANCE: Ratio - 4:1 b Max Rec'd Cycles / Minute - 90 Displacement Per Cycle - 120cc Air consumption @ 6 bar ...
Airmation ECP srl
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... direct priming for medium viscosity products use: transfer / pressure delivery PERFORMANCE: Ratio - 4:1 B Max Rec’d Cycles / Minute - 90 Displacement Per Cycle - 120 cc Air consumption @ 6 bar ...
Airmation ECP srl
Flow: 27 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... application: direct priming for medium viscosity products use: transfer PERFORMANCE: Ratio - 2:1 b Max Rec'd Cycles / Minute - 70 Displacement Per Cycle - 450 cc Air consumption @ 6 bar - 950 ...
Airmation ECP srl
Flow: 1 l/h - 210 l/h
Pressure: 7 bar - 10 bar
Power: 70 W
... Repeatable and predictable flowrate 9.Reversible 10.Well suited to pumping hazardous or hygeinic fluids 11.Safer fluid containment Magnet drive Micro gear pumps ...
Flow: 0.02 l/min - 3.5 l/min
Pressure: 7 bar - 10 bar
Fluid temperature: -10 °C - 100 °C
... Longer life 12.Safer fluid containment Normal Parameters: 1. Altitude: ≤ 2500 M 2. Humidity environment: ≤ 85% 3. Fluid viscosity: 0 ~ 3000 CPS 4. Ambient temperature: -10 ~ ...
Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm
LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal parts ...
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
... affected from inlet fluid pressure, viscosity and temperature of the media etc. The motor, drived in one direction dispense the fluid, and if drived in the other direction suck back the fluid, ...
DAV TECH Srl
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
... affected from inlet fluid pressure, viscosity and temperature of the media etc. The motor, drived in one direction dispense the fluid, and if drived in the other direction suck back the fluid, ...
DAV TECH Srl
Pressure: 0 bar - 20 bar
Fluid temperature: 10 °C - 40 °C
Input diameter: 0.3 mm
... affected from inlet fluid pressure, viscosity and temperature of the media etc. The motor, drived in one direction dispense the fluid, and if drived in the other direction suck back the fluid, ...
DAV TECH Srl
Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C
ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering ...
Flow: 52 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... technology, ASTRAevo FOOD is a recent project too, conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, reducing at the lowest the maintenance necessities, ...
Flow: 0 m³/h - 50 m³/h
Pressure: 8 bar
Head: 0 m - 5 m
HIPPO mech-sealed self-priming pumps are ideal for pouring operations of non-viscous liquids, unloading chemical products from mobile tanks, and dragging clean liquids or liquids with suspended solids. ...
Dosing pumps suitable for barrels, canisters, carboys or bottles, for dosing liquids of different viscosities. Dosing pumps are mounted by you in your existing container closure (see the locating bore ...
Flow: 14 l/min
... with reusable pumps that the liquid being transferred will be contaminated by the pump, especially if the pump is used for different media or containers and it is not ...
Flow: 50 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from 6 to 10 m ...
Flow: 80 l/min
EuriPump pumps • self-priming vane pump • simple and robust design • easy handling due to low weight • built-in protection filter • 4 m supply hose as standard • additional hose from ...
Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W
Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for ...
HNP Mikrosysteme GmbH
Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W
Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for ...
HNP Mikrosysteme GmbH
Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W
Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for ...
HNP Mikrosysteme GmbH
Flow: 0.1 l/min - 2 l/min
Pressure: 100 bar
Fluid temperature: 135 °C
Multicomponents Specification(s) : Following plate (PS) Sealing : Lip seals and liquid barrier (26KA) Rotation speed : From 10 to 200 min-1, depending on the product involved Output pressure : Max. 100 bars (10 ...
Flow: 0.1 l/min - 3.2 l/min
Pressure: 0 bar - 250 bar
Precision metering high pressure gear pump. Made in stainless steel. For products with medium to high viscosity. Suited for resins, glues, greases, silicones, mastics, etc. Rotation speed : up to 200 rpm (depending ...
Flow: 2.8 m³/h
Pressure: 3.5 bar
Power: 0.37 kW - 1.5 kW
Offset rotor pumps with bronze pump body Descriptive Technical data: Pump body: bronze Max. viscosity: 500 cPo Suction capacity: 3 metres ...
Pompes Japy
Flow: 2.5 m³/h
Head: 0 m - 100 m
Power: 1.5 kW
... displacement pump Descriptive Technical data: Rotation speed: 1400 rpm Current: 4.1 Orifice Ø: 1"1/4 Max. TDH: 100 metres Self-priming displacement pumps for: the transfer ...
Pompes Japy
Flow: 3.5 m³/h
Head: 0 m - 80 m
Power: 2.2 kW
... displacement pump Descriptive Technical data: Rotation speed: 1400 rpm Current: 5.1 Orifice Ø: 1"1/4 Max. TDH: 80 metres Self-priming displacement pumps for: the transfer ...
Pompes Japy
Pressure: 240, 256, 320 bar
... possible by replacing the material pumps. Aqueous and low-viscosity as well as high-viscosity materials are no problem. Fields Of Application Construction Subsequent horizontal barrier Sewer rehabilitation Insulation ...
Pressure: 78 bar - 468 bar
... range of scoop piston pumps comprises a total of 19 pumps in four performance classes with different delivery rates and pressure ratios, making it probably one of the most comprehensive series worldwide. ...
HIGH VISCOSITY MATERIAL FEEDING PUMP THIN MEDIUM FEEDING PUMP SANITARY FEEDING PUMP HEAT PRESERVATION SLEEVE DESIGN WATER CLEANING MECHANICAL SEAL AVAILABLE ALMOST HAVE ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 300 l/h - 86,400 l/h
Power: 0.55 kW - 37 kW
Lobe pump with rectangle inlet and outlet, this lobe pump can transfer potatoes paste, because potatoes paste is very dry and thick, it is very difficult to pump it, our design lobe pump ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 300 l/h - 86,400,000 l/h
Power: 0.55 kW - 37 kW
... new design lobe pump for transfer this meatpaste, we also can add automatic control system with lobe pump, lobe pump can transfer this meatpaste without manual control. HIGH ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 0 l/h - 5.4 l/h
Pressure: 0.2 MPa
Fluid temperature: 0 °C - 60 °C
... as well as liquids including solid substances. A constant flow of high viscous liquids up to 20.000 mPas is possible. Compact construction These lightweight and compact pumps ...
Flow: 2.5 l/min - 46.5 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
... gear pump was designed for transfer and dose chocolate and its derivatives. These applications require temperature control to keep all their properties and characteristics. The temperature constancy is essential because ...
Anglada Pumps
Flow: 0.2 l/min - 3 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications ...
Anglada Pumps
Flow: 0.45 l/min - 8 l/min
Pressure: 0 Pa - 1,000,000 Pa
Head: 0 m - 100 m
The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications ...
Anglada Pumps
... have to be taken into account. Because the viscosity of the fluid can be very high, it is essential to select the appropriate chocolate pumps. We recommend using rotary lobe pumps: ...
Flow: 7 us gal/min - 370 us gal/min
Pressure: 10.3 bar - 31 bar
Circumferential piston pumps, interchangeable with other brands The QP Series is characterized by being Universal - ly interchangeable with other brands in the market, even improving the spare parts quality. Certificates: ...
Q-Pumps
Flow: 13.2 us gal/min - 441.2 us gal/min
Pressure: 7.9, 12.1, 20.7 bar
Lobular pumps at a great price The QL Series feature positive displacement and due to their great versatility, can be adjusted to different applications. Certifications: 3A and EHEDG Characteristics - Has 4 different ...
Q-Pumps
Flow: 70 us gal/min - 850 us gal/min
The QTS is a twin screw pump, 100% sanitary use and ideal as a CIP and Process pump, which reduces time and maintenance costs Certifications: 3-A, FDA and EHEDG Characteristics - Self-priming - ...
Q-Pumps
Flow: 0 m³/h - 120 m³/h
Pressure: 0 bar - 35 bar
... features circumferential piston pumps designed for special pumping applications. These pumps operate at 35 bar maximum pressure with up to 120 m3/h flow rates. Available in ten different sizes, they can ...
Flow: 20 m³/h - 180 m³/h
Pressure: 20, 25 bar
When developing this exceptional pump, we intended to set new standards in double-screw technology. We started by rethinking functional principles from the ground up and eliminated previously known deficiencies typically ...
Flow: 0 m³/h - 80 m³/h
Pressure: 0 bar - 15 bar
The FZ series, manufactured by Fristam Pumpen, is a centrifugal pump that offers comprehensive results for high suction operations. his device runs with a 15 bar system pressure and a 6.5 bar discharge pressure. Furthermore, ...
Flow: 4 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...
Flow: 8 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...
Flow: 15 m³/h
Pressure: 160 bar
SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide services corresponding ...
Flow: 10 m³/h - 30 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
The “Dragon ME” series represents the evolution of the Dragon piston pumps series with the addition of the membrane unit in case of pumping highly abrasive liquids. Flow ranges: from 20 to 30 mc / h - in single mode ...
Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...
Flow: 3 l/h - 180,000 l/h
Pressure: 0 bar - 16 bar
... Cavity Pump technology with a highly modular, eco-friendly design. The EcoMoineau™ C pump requires less space for installation which reduces costs and facilitates its integration. Eco Design pump 10% ...
PRODUCTS THAT CAN BE TRANSFERED Liquid Products Viscous Products TECHNICAL SPECIFICATIONS *KULP P-240 Transfer Pump is used for transfering liquid and viscous ...
Flow: 300 l/min
Pressure: 6 bar
PRODUCTS THAT CAN BE TRANSFERED Liquid Products Viscous Products TECHNICAL SPECIFICATIONS *KULP AK-905 Transfer Pump is used for transfering liquid and viscous ...
Flow: 0 l/min - 17 l/min
Pressure: 125 psi
Power: 597 kW
... or transfer. Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps ...
Pressure: 30 psi - 100 psi
Length: 215 mm
Height: 440 mm
... Sensing : 110 - 220 VAC, 50 - 60 Hz Maximum Output Pressure : 850 psi Fluid Viscosity Range : 30,000 - 300,000 cps Ratio : 8.5 Volume/Stroke : 5 cc Max Pump Speed : 60rpm Air Inlet/Fluid ...
Fisnar Inc.
Flow: 0.95 l/min - 7.57 l/min
Pressure: 207, 103 bar
... Nordson® Model 64B pump is a positive-displacement, demand-type pump designed to operate multiple guns at mid-range volume or a single gun in high-volume applications of high viscosity materials. Lower ...
Please specify:
Help us improve:
remaining