Other analytical equipment

... Product description
Universal single-channel flow cell for disinfectant sensors, designed for flow-through measurements with quick-connect inlet and outlet. Standard fittings are 1/4\" quick-connect; optional Φ8 mm quick-connect ports are available ...

... Product overview
The FCL-2-S is a dual-channel inline flow cell designed to house a disinfectant sensor and a 12 mm pH sensor. It features chemically resistant FFKM O-rings, PTFE compression fittings (8 mm) and integrated flow control and detection ...

... Product Overview
The pH is a digital pH sensor with an RS485 communication interface and the standard Modbus protocol. Stainless steel corrosion resistant shell, IP68 protection grade, built-in PT1000 thermistor and compensation algorithm, with ...

... General description
The Kunak AIR Pro is an outdoor multi pollutant air quality monitor known for its accuracy and reliability.
It is validated by international bodies such as the US EPA, Airparif, AQ Spec and others.
It provides ...

... Product Details
Kunak AIR Lite is an air quality monitoring station designed for industrial applications and mass deployments in cities. It provides accurate, real-time air quality information and enables users to monitor pollution levels and ...

Turn the invisible to visible – ECnose Indoor Air Quality Monitor gives an insight of your indoor air quality anytime, anywhere. ECnose is a state-of-the-art Gas Sensing Device based on the solid polymer technology which replaces the human nose to accurately ...

... • Provides Portable Hygrometers with the optimal flow of ambient air when sampling dry rooms, cleanrooms or environment chambers • Intrinsically safe for use in flammable atmospheres • Long life Li-ion battery with remaining hours display • ...

...

• Device suitable for surface and ducted sources
• Precise analysis and identification of the nature (signatures and fingerprints) of emissions (gases, particles, odors, noise)
• Accurate identification of emission sources
• Identification

...

• Device tailored for monitoring at site fencelines
• Event signatures and fingerprints
• Quantification and identification of gases, particles, odors, and noise

... The cutting-edge indoor monitoring system
The POD2 is the ultimate all-in-one solution for understanding and controlling your indoor environment. Designed to manage and optimize your spaces, it ensures not only the health and well-being ...

... Introduction: ZWIN-PMV06 detector is an intelligent "image vision" sensor detection system developed for the detection of atmospheric particle concentration. It adopts high-sensitive imported components, integrates leading opto-mechanical integration ...

ZWIN-AQMS06 Mini Air Quality Monitor is designed specially for gas detection. All monitoring parameters can be configured , which include O3, NO2,NOx,CO,SO2, PM2.5 and PM10. Other pollutants like VOCs, H2S and CO2, noise and meteorological factors can ...

The ZWIN-AQMS06-M Portable Mini Air Quality Monitor is a newly launched product by our company to provide supporting equipment for environmental protection departments and related engineering projects. ZWIN-AQMS06-M detecting air pollutants , provides ...

Flow: 0.0003 m³/h - 0.018 m³/h
Pressure: 0.5 bar - 20 bar
Fluid temperature: -40 °C - 100 °C

... Overview
The magnetic drive principle of the MPB003 micro magnetic gear pump provides a completely sealed pump chamber. No pulsation, no leakage, low noise, compact size and long operational life. Designed to operate in the flow range 5–300 ...

The Novatest POT system is a complete and modular solution designed to perform mechanical tests on steel profiles driven into the ground, essential for assessing load-bearing capacity and soil-structure interaction in photovoltaic, agrivoltaic, and road ...

Flow: 0.8 l/min - 5 l/min
Fluid temperature: 0 °C - 45 °C
Length: 112 mm

Whatever media you’re using you can be assured that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal ...

Flow: 2 l/min
Length: 112 mm
Width: 37 mm

Whatever media you’re using you can be assured that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal ...

Flow: 1 l/min - 300,000 l/min
Length: 112 mm
Width: 37 mm

Whatever media you’re using you can be assured that the Apex2 personal sampling pump has the power to handle any personal monitoring regime. Optimised at around 2l/min, the flow at which most Occupational Hygiene measurements are made, the Apex2 personal ...

Temperature: 110 °C - 800 °C
Response time: 50 ms

The IF-BC is one of our latest developments in the field of infrared technology. Ranged from 110 to 800°C, this sensor is designed to measure temperature always accurately, without recalibration, regardless of the type of material and the evolution of ...

... Suitable for ducts with diameter up to 500mm, intercepts the spark and automatically extinguishes it with a water spray without stopping the production process. TEST function. Anti-flooding system optional. MEMORY function: the alarm signaling LEDs ...

... Suitable for ducts with diameter up to 1 meter, intercepts the spark and automatically extinguishes it with a water spray without stopping the production process. TEST function. Anti-flooding system optional. MEMORY function: the alarm signaling LEDs ...

... Suitable for ducts with diameter up to 500mm, dual action system: intercepts the spark, automatically extinguishes it with a water spray and checks that the spark is extinguished. TEST function and anti-flooding system. MEMORY function: the alarm signaling ...

... Non polarizing electrodes are mainly used in following geoelectrical applications: - Induced polarization - Spontaneous potentials - Downtown measurements By means of electrodes, potentials generated by electrochemical action between electrode ...

... Nonpolarizing electrodes are mainly used in following geoelectrical applications: - Induced polarization - Spontaneous potentials - Downtown measurements By means of electrodes, potentials generated by electrochemical action between electrode ...

... Nonpolarizing electrodes are mainly used in following geoelectrical applications: - Induced polarization - Spontaneous potentials - Downtown measurements By means of electrodes, potentials generated by electrochemical action between electrode ...

The PHEH sensor has been designed to perform under hard conditions from pure mountains water with conductivity as low as 20 µS/cm, lakes and rivers (100 – 2000 µS/cm), seawater with conductivities of 50 mS/cm and to wastewater with conductivity higher ...

The PHEHT cutting-edge sensor excels in measuring pH, ORP, and temperature parameters. Engineered for challenging conditions, it boasts a long-life electrode, digital technology, and Modbus RS485 protocol for seamless integration.

Temperature: -100 °C - 3,000 °C
Dial diameter: 10 mm
Spectral range: 2 µm - 20 µm

... When measuring flue gas temperatures, flames, or the temperature in the combustion bed, radiation thermometers offer significant advantages over thermocouples: - Easy access for replacement or maintenance work - No influence from temperature radiation ...

Temperature: -25 °C - 3,000 °C
Dial diameter: 1 mm - 500 mm
Spectral range: 2 µm - 20 µm

Measurements made outdoors and in different climate zones place high demands on both the stability of the measurement and the resistance to adverse environmental conditions. Our instruments have endured varying conditions ranging from the deserts, to ...

Temperature: 100 °C - 500 °C
Dial diameter: 1 mm - 500 mm
Spectral range: 11 µm

... Although glass is an ancient material from which chalices and drinking vessels were made in the time of the pharaohs, it was only industrial production that gave it the importance it has today. During manufacturing and processing, temperature is ...

Low-cost model with the functions necessary for general colony counting.

All-round model not only for research and inspection but also for various applications.

High-end model with a good balance of performance and cost. Ideal for counting small colonies.

Temperature: 80 °C - 2,000 °C
Dial diameter: 0.5, 12.5, 4.5 mm

... Temperature Range from 80°C to 2000°C Emissivity adjustable from 0.1 to 1 High Accuracy High-Speed Compact design Available with different focus distance and aiming spot size LED aiming light Supplied with Calibration Report traceable to certified ...

Temperature: 80, 2,000 °C

... INDUCTION Heating Systems CEIA SH15/SLE Compact Pyrometers for Measurement of metallic surfaces between 80°C and 2000°C emperature Range from 80°C to 2000°C Emissivity adjustable from 0.1 to 1 High Accuracy High-Speed Compact design Available with different ...

CEIA offers a wide range of infrared optical sensors equipped with low-intensity LED aiming which cover a reading range from 80°C to 2000°C. The CEIA SH15/SLE Infrared Sensors can be connected to the Power and Master Controller V3 Units to accurately ...

Flow: 7 l/min
Length: 120 mm
Width: 60 mm

... DC motor driven MR-6B : Pressure type MR-6BS : Vacuum type Built-in use *No power plug included because it is designed for built-in use. *Rubber-made legs are sharp-pointed. Not for self-standing installation. • Supply and pressurization of ...

... AQ AnaCONT Sensor Kit – Reliable pH, ORP or DO Monitoring in Remote Locations The AQ IoT Data Logger (IP68) combined with an AQ AnaCONT Sensor for pH, ORP or Dissolved Oxygen offers a robust solution for long-term water quality monitoring in remote or ...

... The UCP1A contact probe is a lightweight and versatile instrument that provides a means of carrying out underwater cathodic protection potential measurements. It has been specially designed for use with manned or Remotely Operated Vehicles (ROVs) and ...

... The UCP1B proximity probe is a lightweight and versatile instrument specifically designed to carry out underwater cathodic protection potential measurements. The probe has been developed for use with manned or Remotely Operated Vehicles (ROVs) and ...

... The Marine Silver/Silver Chloride Half Cell is suitable for installation on surface structures such as jetties. it has been specially designed to allow easy monitoring when connected to a separate high impedance voltmeter (greater than 10 meg Ohm). ...

... Smoke aspiration systems for active and safe room monitoring The timeframe between the start of the fire and its detection is the key to successful fire fighting. Smoke aspiration systems are systems for room monitoring with threshold value alarms. ...

Pressure: 0.4 bar - 2.5 bar

... Full PTFE bellows pump Pump head can be rotated in 90° steps and connected to the gas line from the top or side Max. capacity: approx. 5 Nl/min with a counter-pressure of ±50 mbar on the vacuum and pressure side Max. operating pressure range: 0.4 to 2.5 ...

Pressure: 0.25 bar - 2.5 bar
Fluid temperature: 5 °C - 180 °C

... Diaphragm pump with housing Capacity at atmospheric pressure: max. 3 Nl/min Max. operating pressure range: 0.25 to 1.95 bar abs. Compact design Corrosion-resistant 100 % lubricant-free High level of gas tightness Power: 230 V Material of sample-contacting ...

Flow: 300 l/h
Pressure: 0.25 bar - 2.5 bar

... - Diaphragm pump with housing - Capacity at atmospheric pressure: max. 3 Nl/min - Max. operating pressure range: 0.25 to 1.95 bar abs. - Compact design - Corrosion-resistant - 100 % lubricant-free - High level of gas tightness - Power: 230 V - Material ...

... The steam quality test kit (option "A") is utilized to monitor the steam dryness value, the steam superheat value and the non-condensable gas value. The practice of steam quality testing is carried out worldwide and has been an EU requirement ...

... Steam Quality Testing is designed for steam sterilization cycles. It has a very high quality steam is an crucial requirement for preserving finest results according to EU requirement (EN 285) and the practice adopted worldwide. Option B type assures ...

... Steam Quality Test Kit (Option ‘C’) is Thermal Detection's most demanded product. Steam Quality Testing has been an EU requirement for many years (EN 285) and the UK Health Service Standard HTM2010. High quality steam is an essential requirement ...

Temperature: 350 °C - 2,500 °C

... Product Feature: Digital two color pyrometer with through the lens sighting, digital interface, analog output & USB 2.0 for metal casting applications Temperature Range: 700°C - 1700°C Tempsens offers wide range of highly accurate non-contact pyrometers ...

Temperature: 250 °C - 1,900 °C

... Digital pyrometer with extended sensor head. Analog and digital output, Inbuilt LCD & keypad for parameterization ...

Temperature: 800 °C - 2,500 °C

... Highly Accurate Digital Pyrometer with Extended Sensor Head, Laser light, Inbuilt LCD &Keypad for Parameterization 600°C to 1900°C Spectral range :1.0 μm...1.6 μm Laser Targeting light for precision targeting Inbuilt LCD Display and Keypad ...

Flow: 0 l/min - 0.5 l/min
Pressure: 0 mbar - 500 mbar
Head: 17 mm

... CMP-11G,mini gas pump,diaphragm micro pump are well suited for gas sampling, transferring, evacuating and compressing air and neutral or corrosive gases as well as vapors. Technical Features: 1. Uncontaminated flow. 2.Non-metallic construction. 3.Compact ...

... • Direct reading field air pollution degree No need for mobile phones to download data from cloud, no Internet Traffic problem,Easy use battery or AC adaptor to power the meter • Accurate Temperature and Humidity measurements • Mixed-gas VOCs(Volatile ...

... • CO: O 999 ppm range. • MAX Hold with Time stamp. • Alarm level setting. • Replaceable sensor extends meter ?Ïfe. • Stabilized electrochemical CO sensor. • Automatic sensor zeroing upon start-up. • Auto power-off time setting. • Typical three ...