- Metrology - Laboratory >
- Analytical Instrumentation >
- Other analytical equipment
Other analytical equipment
Particle counter for orienting measurement of the environmental conditions / Determination of HCHO, fine dust (PM2.5 / PM10) / Temperature and relative humidity / 3 "TFT LCD display Particle Counter Air Quality Meter at an air test in ...
The carbon dioxide meter PCE-RCM 12 is used for indicative testing of environmental parameters. The carbon dioxide meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the ...
DUSTTRAK DRX AEROSOL MONITOR 8533 SKU: 8533 The DRX Aerosol Monitor can measure both mass and size fraction at the same time and provides a gravimetric sample. It is suitable for indoor and outdoor applications, industrial and occupational ...
TSI
DUSTTRAK DRX AEROSOL MONITOR 8534 SKU: 8534 Our handheld DRX Aerosol Monitor is a multi-channel, data-logging, laser photometer for real-time aerosol readings. Portable design allows you to measure dust, fumes, mists and smoke and is ...
TSI
DUSTTRAK ENVIRONMENTAL AIR MONITOR SYSTEM 854301-1 SKU: 854301-1 The DustTrak Environmental Air Monitor System can house DustTrak photometer models 8540 or 8543. DustTrak's early detection features allow quick response to exposure concerns. ...
TSI
Door tester kit - SA-KIT-DoorT Door tester kit is the right choice for pushing tests of automatic doors. This kit is useful for any pressure tests in sliding doors, windows and gates. The content of this kit complies with UNI EN 12453 ...
“Snook & Ciriello” testing force gauge kit – SA-KIT-SC Digital force gauge kit is suitable for towing and pushing tests according to “Snook and Ciriello” method. The contents of this kit comply with SNOOK & CIRIELLO regulations UNI ...
Lift industry instrument kit – SA-KIT-ASC1 Here below you can find the complete kit for Lifts and Components Directive. The content of this kit complies with the requirements of Directive 2014/33/EU. This kit included calibration reports.
The MecoTrode pH sensors are designed for processes in the chemical industry with extreme pH values. They are constructed from a H-glass type membrane which provides a low alkaline error and stable measurement even at high temperatures. Three ...
Hamilton Process Analytics
Polilyte Plus sensors have been designed to withstand demanding industrial processes in chemical, petrochemical, process water, and wastewater treatment applications. The sensor has a maintenance-free design as clogging is eliminated ...
Hamilton Process Analytics
The maintenance free Polilyte Pro sensor is designed for pH measurement in water applications, especially in low conductivity samples, e.g. wastewater, fish farming, ground water, etc. The Single Pore liquid junction guarantees best ...
Hamilton Process Analytics
The Universal V ™ Cut Monitor Model is manufactured by Drexelbrook, that is designed to monitor the dielectric value of a component in mixtures to identify its concentration. Water Cut Meter works in industrial conditions of up to ...
Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar
ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering of viscous, shear sensitive ...
BZ25 CO2 Air Quality Monitoring Device The BZ25 CO2 air quality monitoring device is designed to measure the CO2 content in the air every 2 seconds and to remind you when CO2 levels are too high so that someone opens a window and lets ...
Flow: 15,000 l/h
Power: 900 W
Weight: 5.5 kg
Brilliant prospects for self-pumped water Being made of stainless steel, the submerged waste water pump TWP 9000 ES is extremely resistant to extreme weather conditions and corrosion. The equally high-quality and robust material of the ...
Flow: 0.35 l/min - 0.5 l/min
Pressure: 30 mbar - 350 mbar
The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...
Nitto Kohki Europe
Flow: 0.4 l/min
Pressure: 100 mbar
Operating principle The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, ...
Nitto Kohki Europe
Flow: 0.01 l/min
The Bimor’s driving force, the bimorph, comprises two parallel piezoelectric wafers. Their nature is to expand or contract depending on the direction of the voltage. Therefore, when an alternating current is applied, one wafer expands ...
Nitto Kohki Europe
VWF-10N is an attachment for measurement of friction force during single or reciprocating motion. It is available for various samples with its wide variety of contactor holders. This item also has a plate for weight to generate vertical ...
The professional-grade AdvancedSense® XM Air Quality Meter is a rugged, datalogging device with a highly intuitive user interface. In conjunction with our versatile DirectSense® II probes, it enhances the way to monitor to improve the ...
GrayWolf Sensing Solutions
GrayWolf’s portable and semi-permanent VOC meters, monitors are highly versatile, for low parts-per-billion ranges up to high PPM toxic VOC exposure ranges. Volatile Organic Compounds (VOCs) emanate from a broad range of sources in industrial ...
GrayWolf Sensing Solutions
For 20 years, GrayWolf’s highly advanced, professional indoor air quality (IAQ) meters and instruments have made proactive IAQ and green building surveys efficient and easy to conduct. Occupant wellness is rapidly gaining awareness as ...
GrayWolf Sensing Solutions
The AQ7000 continuous and automatic air quality monitoring system is composed of sampling devices, calibration device of gas analyzer, particulate analyzer, meteorological system, data acquisition system of substations, services at central ...
AnHui Wanyi Science and Technology Co., Ltd.
SP7220 fugitive dust (noise) monitoring system is mainly composed of a particulate testing unit, a noise testing unit, a meteorological five-parameter sensor, a data acquisition and transmission unit and a power supply system. It is mainly ...
AnHui Wanyi Science and Technology Co., Ltd.
AQ7100 micro ambient air quality monitoring system is an all-weather outdoor automatic monitoring terminal. It is composed of a sample gas collection unit, a gaseous pollutant testing unit, a particulate testing unit, a meteorological ...
AnHui Wanyi Science and Technology Co., Ltd.
Automated, Continuous Thermal Imaging System for Remote Fault Detection in Substations and Industrial Sites Advanced Energy's ThermalSpection 724 allows you to remotely monitor multiple, distant substations from a central location. •Remote ...
ADVANCED ENERGY
Turnkey Solution for Continuous Infrared Imaging inside Boilers and Furnaces Advanced Energy's BoilerSpection SD imaging system provides clear, informative through-flame imaging. With BoilerSpection SD, you can proactively manage your ...
ADVANCED ENERGY
Tracer Gas Systems for Ventilation System Studies and Tests The Advanced Energy Innova 3750-2 basic ventilation system (dual gas) and Innova 3750-5 basic ventilation system (multi-gas) offer fully integrated gas monitoring solutions. ...
ADVANCED ENERGY
Introduction The non-road machinery/diesel vehicle exhaust smoke detection system (standard version) is equipped with transmission type smoke meter, engine tachometer, environmental parameter tester, data interaction module, router, ...
Introduction The non-road machinery/diesel vehicle exhaust smoke detection system (basic version) is equipped with transmission type smoke meter, sampling probe, high-strength chassis and tablet computer with professional non-road testing ...
Introduction The non-road machinery/diesel vehicle exhaust smoke detection system (stand-alone version) is equipped with transmission type smoke meter, display and sampling probe, and optional built-in printer can be used to measure ...
PMsense is a PM1.0, PM2.5 and PM10 Particulate Matter transmitter with RS485 Modbus-RTU output, suitable for outdoor air quality monitoring. The dust particles concentration is measured using the laser scattering principle. The ...
Delta OHM
Datalogger for indoor air quality analysis (IAQ). The instrument measures the quantities: airspeed, temperature, relative humidity, atmospheric pressure, CO2 (Carbon Dioxide) and CO (Carbon Monoxide) by using P37AB147 probe. The ...
Delta OHM
Logging and measuring: the HD21ABE is the perfect instrument for this. Stable and rugged design. The instruments simultaneously measure the parameters: •Carbon Dioxide CO2 •Carbon Monoxide CO •Atmospheric Pressure The HD21ABE17 ...
Delta OHM
"PIX Service Kit", a composite tool kit comprising of a vast range of equipment required in maintaining drives. The components are housed in a strong ABS outer case, which is light-weight, portable and sturdy. What’s included? - PIX-X'Align® ...
A wide selection of Sension+ electrodes are available to meet almost all laboratory and field applications. Measureable parameters include pH, Dissolved Oxygen, Conductivity, ORP, Ammonia, Ammonium, Chloride, Fluoride, Nitrate, and Sodium. ...
HACH LANGE
RADIOMETER ANALYTICAL develops and manufactures an extensive range of electrochemical electrodes - combined pH, glass or reference electrodes, metal electrodes, ion-selective electrodes and conductivity cells - for every application and ...
HACH LANGE
pH and ORP sensor for high purity, low conductivity applications, ideal for the power, pharmaceutical, and electronics industries This instrument connects to Claros, Hach’s innovative Water Intelligence System, enabling you to seamlessly ...
HACH LANGE
The Multitec® BioControl is a unique measuring system comprising a fixed stationary unit and a mobile gas measuring device. It is used in small to medium-sized biogas plants, landfills, wastewater treatment plants and composting plants. The ...
All plant operators producing electricity from biogas, sewage gas or landfill gas aim to optimize processes and thus ensure greater efficiency – in other words, obtain as much methane as possible. At the same time, however, harmful components ...
AirWatch continuously monitors the air quality in production halls and warehouses using an optical, laser-operated measuring method. The measured values - including the number and size distribution of the fine dust particles - are stored ...
The HI4115 silver/sulfide selective electrode is a complete potentiometric cell that contains a silver/silver chloride (Ag/AgCl) reference housed within a PEI plastic body with a potassium nitrate electrolyte. The internal elements are ...
Hanna Instruments
The HI3811 is a titration-based chemical test kit that determines the alkalinity concentration in samples within a 0 to 100 mg/L (ppm) CaCO3 or 0 to 300 mg/L CaCO3 range. The HI3811 is supplied with all of the necessary reagents and equipment ...
Hanna Instruments
The HI3818 is a titration-based chemical test kit that determines the carbon dioxide concentration in three ranges: 0 to 10 mg/L CO2, 0 to 50 mg/L CO2, and 0 to 100 mg/L CO2. The HI3818 is supplied with all of the necessary reagents and ...
Hanna Instruments
INDOOR AIR QUALITY MONITOR FOR DUST EXPOSURE FOR PM1, PM2.5, PM4.25, PM10, TSP The AirSafe PM provides continuous and precise monitoring of dust exposures in indoor ambient air. The AirSafe PM can be used for indoor workplace ...
utomatic & Real-Time Suspended Particulate Monitor MP101M + OPM MP101M Beta gauge monitor with its optional OPM (Optical Particulate Monitor) The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when ...
AUTONOMOUS NETWORKS OF SENSOR-BASED MINI-STATIONS Cairnet® 2020 Cairnet® device is a real-time standalone and networkable air-monitoring station containing up to 6 Cairsens® microsensors and cellular communication within a waterproof ...
The UCP1A contact probe is a lightweight and versatile instrument that provides a means of carrying out underwater cathodic protection potential measurements. It has been specially designed for use with manned or Remotely Operated ...
Buckleys (UVRAL) Limited
The UCP1B proximity probe is a lightweight and versatile instrument specifically designed to carry out underwater cathodic protection potential measurements. The probe has been developed for use with manned or Remotely Operated Vehicles ...
Buckleys (UVRAL) Limited
The Marine Silver/Silver Chloride Half Cell is suitable for installation on surface structures such as jetties. it has been specially designed to allow easy monitoring when connected to a separate high impedance voltmeter (greater ...
Buckleys (UVRAL) Limited
The Ultrameter III 9P™ AHL Titration Kit, is based on the tried and tested design of the Ultrameter II™. The 9P adds the ability to perform in-cell alkalinity and hardness titrations either as stand-alone measurements or as part of an ...
Pressure: 0.06 MPa
Weight: 500 g
SADP (Air Displacement Pipette) is a pipetting module developed by Keyto based on aspirate and dispense technology with tips to avoid contamination of samples and pipelines. The module includes a highly sensitive pneumatic liquid level ...
Keyto Fluid Technology
Pressure: 0.06 MPa
Weight: 500 g
The SP28 is a programmable, automatic air displacement pipette pump independently developed by Keyto for use with disposable tips to achieve precise dosing aspiration and dispense. This pipette allows for automatic tip pick-up and ejection, ...
Keyto Fluid Technology
Fluid temperature: 15 °C - 40 °C
SADP (Superb Air Displacement Pipette) is a pipetting module developed by Keyto. Based on pneumatic aspiration and dispensing technology with disposable tips for pipetting, which supports automatic aspiration and dispense in the range ...
Keyto Fluid Technology
Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM2) - ALBIN PUMP Specifications: Flow rate: up to 65 l/h (17 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control options: Manual, 4-20 mA, SCADA, ...
Albin Pump
Flow: 7.9 l/h - 126 l/h
Pressure: 6.9, 7.6, 2.1, 3.4, 4.5 bar
Power: 0.18 kW
PERISTALTIC METERING PUMP (KM3) - ALBIN PUMP Specifications: Flow rate: up to 126 l/h (33 gph) Discharge pressure: up to 7.6 bar (110 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control options: Manual, 4-20 mA, ...
Albin Pump
Flow: 108 l/h - 600 l/h
Pressure: 6.9, 3.4, 2.1, 4.5 bar
Power: 0.3 kW
PERISTALTIC METERING PUMP (KM4) - ALBIN PUMP Specifications: Flow rate: up to 600 l/h (158.5 gph) Discharge pressure: up to 6.9 bar (100 psi) Turndown ratio: 10,000:1 Maximum suction lift: - 9 m Control options: Manual, 4-20 ...
Albin Pump
Flow: 0 m³/h - 30 m³/h
Pressure: 0 bar - 4 bar
Industrial flexible impeller pump for standard and hygienic applications Polished stainless steel for hygienic applications Industrial stainless steel for standard, non-sanitary applications Bronze for non-corrosive duties Typical ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining