... BERNARD safety accessory for working at the top of electric power poles Safety accessory for operators working at the top of electric power poles - Eases the strain on the person hoisting equipment to the top of the pole. - Significantly improves worker ...
Temperature: -253 °C
Length: 2 m
... This red-and-black colored silicone-clad thin-diameter sensor cable is intended for measurements at cryogenic temperatures, down to 20 K, using a cryostat and our Kapton- or Teflon-insulated Hot Disk® or Hot Strip™ sensors. The sensor cable consists ...
... General
The Roller Block ARB from Aardwolf is designed for loading and unloading kitchen worktops and other flat slabs using Aardwolf Transport Frames. The roller assembly offers low-friction support to protect slab surfaces and to assist safer, ...
Temperature: -40 °C - 200 °C
... Signal cable connect the sensor and the preamplifier and it can shield the sensor from electromagnetic interference.
Features
Solid polytetrafluoroethylene insulated coaxial cables
...
Temperature: -20 °C - 80 °C
... Coaxial cable is used for transmitting the AE signals, and as the cable connecting the preamplifier and the acquisition instrument, which has wideband of frequency and excellent noise suppression characteristics. Features： Radio frequency cables with ...
Length: 2 m - 20 m
... Key features
- Lengths available: 2 m / 5 m / 10 m / 15 m / 20 m
- Power connection cable for positioning lasers
- Screw cap M12 industrial connector, 4-pin, IP67 rating
- Polarisation code: A (DeviceNet / CANopen)
- Angled
Nominal voltage: 58 V
... Overview
Original connection cable for Campagnola Li-ION 700 battery, designed to power olive shakers, pruning shears and other Campagnola 58 V tools.
Description
The Campagnola Li-ION 700 battery connection cable is the original ...
... Description
The Pellenc Olivium connection cable is a spare part designed for use with Pellenc electric olive beaters, providing a reliable link between the lithium battery and the tool. The cable is flexible and engineered to withstand intensive ...
Nominal voltage: 17, 21 V
... Description
Cable compatible with Campagnola batteries, designed for use with Alice and Hercules olive harvesters operating at 16.8 V and 21 V. Compatible with Campagnola lithium batteries. The ultra-flexible Campagnola lithium battery cable ...
Nominal voltage: 100 kV
Wisman CA100C3 medical high voltage cable assemblies are X-ray cables terminated with 3-pin (O3) Federal Standard terminations rated for up to 100 kVDC. These assemblies fully comply with IEC 60526 and NEMA XR-7 standards, and are type tested under the ...
Nominal voltage: 10 kV - 36 kV
Cross-section: 50 mm² - 400 mm²
... • ISO 9001, IEC, CE, RoHS, CCC, KEMA, BS, DIN and ICEA upon request
• Conductor: Compact stranded copper conductor, Cl.2 as per IEC 60228
• Conductor Screen: Semi-conductor; Screen : Copper tape
• Insulation: XLPE(cross-linked polyethylene) rated ...
Cross-section: 5.89 mm² - 38.7 mm²
... • ISO 9001, IEC, CE, RoHS, CCC, KEMA, BS, DIN and ICEA upon request
• ALL Aluminium Alloy Conductor (AAAC) standard: ASTM B399, EN 51082, IEC 61089
• Applications range from extra high voltage (EHV) transmission lines to distribution network
• ...
Supplying spiral cable for all of MYTORQ screwdrive with 6 pin.
Description: Constant section retaining rings feature a uniform, constant section. The material used to make the ring is the same width at any point along the circumference of the ring. These cost less than tapered and spiral retaining rings and ...
Nominal voltage: 100, 150, 48 V
Temperature: -50 °C - 80 °C
Cross-section: 0.14, 0.25, 0.05 mm²
... AK12.4 Standard cable for our sensors double shielded for high signal quality ideal in an EMC-critical environment; AK12.2 thin, highly flexible cable (NOT FOR DRVL, DRBK, DRDN!) thin, highly flexible cable according to DIN 47100 ideal for mobile devices ...
Temperature: -30 °C - 70 °C
... N-Type Right Angle male to N-Type straight female cable antenna, Cable length 10 meters H155 Cable Cable Type: - H-155 with 6.1 mm diameter H 155 is a modern low loss coax cable within the 5 mm range, compared to RG58 it has less losses thanks ...
... Just around the corner... This gentle hose and cable guide is very practical, because it lets you wind cables off several reels, rings, or drum from the shelf directly onto a permanently installed winding unit or length measuring unit. Max. diameter 40 ...
Length: 2 m
... M12-5 core connecting cable M12 female connector, standard cable length black 2m ...
Length: 2 m
... M12-8 core connecting cable M12 female connector, standard cable length black 2m ...
... Compatible with Hohner encoders Reduces the possibility of wiring errors Eliminates risks of short-circuits Saves on installation time ...
Length: 3 m
... Product Overview
The RS232 T-part Cable DB9 MBC II [7.03.366] is designed for Bronkhorst EL-FLOW instruments with Analog or Profibus interfaces. This 3-meter cable ensures reliable data communication and power supply.
Application Examples
- EL-FLOW
Mass Flow ONLINE BV
The EL032 is a replacememt 3 meter (about 10 ft) sensor cable for DrDAQ sensors.
The power cables for air cooled induction units consist of a robust rubber cable for use with aluminium inductors. Should the cables be damaged during use on construction sites, they can be easily repaired.
Weldotherm GmbH
... * Rating : CATIII 1000V CATIV 600V * Current : 20A * Colour : Black, Red * Connection : Slide-on 2mm Jack With No.4 (T=48) screw Option : 4mm Jack (LN-A35) * Jaw Opening : 34mm * Recommended for use with LN-S05 test leads ...
... MTI905689 Data Transfer Cable for MTI543-392 to MTI542-007A or MTIEH-542-072A • Weight - 1.0000 kg • Components & Accessories - • OPTIONAL COMPONENTS & ACCESSORIES BELOW Miscellaneous: • MTI301657: 2" Extension rod • Details - • MTI543-392 ...
... Key Facts: • Up to 2, 4 or 6 wavelengths beam-combined and efficiently fiber coupled in one compact housing • Over 30 different wavelengths available • Single-mode, polarization maintaining fibre coupling with customizable fibre outputs • Conductively ...
Omicron Laserprodukte GmbH
... Tie Tensioning Tool with Manual Cut Off Malco’s TY4 Tie Tensioning Tool provides a faster, more effective alternative to securing fiberglass duct take offs compared to what can be done by hand. This rugged Tie Tensioning Tool features a manual, ...
Malco Products, Inc.
The Flex caddy allows the Heater-Shaker GEN1 to be installed on the Opentrons Flex deck and sit below the deck, enabling below-deck cable routing and labware placed on top of modules to remain closer to the deck surface. The calibration adapter is used ...
Length: 2 m
... • Available for all DIGI-MET measuring instruments with a variable data output (DATA VARIABLE) • Length 2 m • With a data transfer button on the plug-in jack • For use with MarCom Professional software to transfer the measured results to 3C, laStoS ...
Hose diameter: 32 mm - 118 mm
Width: 59 mm - 156 mm
... U-bolt clamps Ideally suited for mounting exhaust systems and in many other applications. Pre-treated with white galvanizing, both the collar and u-bolt versions are available in a wide range of diameters. ...
AB TRASMISSIONI SRL