- Electricity - Electronics >
- Cable, Connector, Enclosure >
- Other connectors and accessories
Other connectors and accessories
Yantel 3dB 90° hybrid coupler is a low profile,low cost high performance surface mounted device.This series products are suitable for AMPS,DCS,PCS,UMTs & 3G band applications.The excellent electrcal acteristics of high isolation, high ...
Yantel Corporation
Hydroscand
CVB series derived from Mil C 5015 specification, which concerns the electrical connectors usually called “MS”. These connectors have been used for many industrial applications thanks to their versatility, reliability and ease of supply. In ...
Whether for the test of electric units in the lab or for the test of car engines, a reliable un-interruptible power supply and signal transfer are the most Important elements to execute a test procedure. adaptronic hand adapters guarantee ...
Standard: IEN 60947-7-1 Rated current: 125A Rated voltage: 800V Cu cross section: 2.5~50mm2 AL cross section: 6~50mm2 Operating temperature: ≤ 80 °C Housing material: PA66 Screw head: Hexagon Pole: 1 Mounting: DIN rail
Shanghai Leipold Electric Co., Ltd.
Product information "Primary adapter FOX system" The easy-to-use, interchangeable primary adapters for FRIWO's adapter systems make it possible to use products globally and can result in considerable reductions in the cost of logistics. ...
FRIWO Gerätebau GmbH
Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), Blue, 3 ft. Premium cabling for Category 6, Category 5e and Category 5 applications—rated for 550 MHz/1 Gbps communications Designed to meet Category 6 specifications; ...
TRIPPLITE
Designed for optical signal distribution in passive optical networks (PON). Used in VOKS, IFC-KPV, etc. cross-connection cabinets. Manufactured using planar technology (PLC), which allows operation in a continuous wavelength range of ...
Network adapter Network adapter Profinet 2 x Ethernet 10/100Mbps Up to 16 expansion modules Small slice type Light version 10pt removable terminal block Vibration resistence - Sine vibration (based on IEC 60068-2-6) 5 ~ 25Hz: ±1.6mm ...
Primary current: 5 A - 46 A
Connectors and Cable Clamps Connector Body Material: Aluminum, Electroless Nickel Plated. Other connector materials available upon request Cable Clamp Material: Aluminum, Electroless Nickel Plated. Other strain relief materials and ...
Douglas Electrical Components
1" (25.4 mm) NPT adapter with 2 socket MIL style connector and 24 inches of Class I, Division 2 rated cable to flying leads.
Features – Nearly 30 years of experience in the networking industry – World class production/QC equipments – Complete in-house design-production integration – For 1G/10G/40G Network – Available ...
Simplex armored optical fiber pigtail Fiber:1 fiber Size: ID2.0mm-OD3.0mm Cable length: length available upon request Connector type: FC/LC/SC/ST/MU/MTRJ/E-2000 Surface process: flame retardant jacket Work temperature:-20°to +70° Advantage: 1: ...
Flexible Technology Co,.Ltd
General Photonics NTC Drop In Couplers divide the power in optical signals. Three port versions "tap off" a portion of the input signal, based on the specific coupling ratio. Four port couplers have two input signals and two output signals ...
General Photonics
* Combine up to 8 units of solar chargers and solar power kits to get a bigger power output * DIY your own solar power kit * Compatible with both 12V and 24V system * Hand up to 30A max of solar charging.500W for 12 V system
Primary current: 630 A
Voltage: 6 kV - 24 kV
Per or exceed IEC 60502-4:1997 24kV Voltage Class (12kV Max phase-to - ground) 125kV BIL and Full Wave Crest -Impulse Withstand 54kV AC - 5 Minutes Withstand Partial Discharge : < 10pcs@20kV 630 Amp - Continuous
Arihant Panel Fittings Private Limited
Voltage: 1 kV - 100 kV
For decades Amphenol Alden has been partnering with leading medical device manufacturers who require High-Voltage Connectors and cable assemblies for their devices. Our portfolio of optimized high voltage solutions help ensure product ...
Description Joint hinge C - Festoon / Split Connection Systems code of product;matériel;weight(kg);Dimensions (mm):a;h;b;t VS1028E2;Steel (galvanized);0.28;37;35;100;3
Although these connectors do not carry the MS prefix, they are of the MS type. Other than the alumina ceramic dielectric, these connectors meet standard specifications for MIL-C-5015 connectors. They are solid shell, straight plug threaded ...
UR401 - Polyrib 110mm Coupler Double Socket UG601 - Underground Drain 160mm Coupler Double Socket EAN No: 5022733018058 Sales UoM: EA Volume m3: 0.0016 Gross Weight Kg: 0.22 Net Weight Kg: 0.22 Pack Qty: 1 Thickness mm: 131 Width mm: ...
POLYPIPE
The 71 KB Series is a double shut-off hydraulic coupling used for liquid media. The plug profile is manufactured in accordance with ISO-7241-1, Series B. All 71 KB versions are manufactured from non-rusting materials. Specifications: Working ...
COPPER FLAP SHUNTS sheets of polished copper, with a thickness of 0.10 or 0.30 mm 2 copper plates placed at the ends, for the connection holes Sections to 5,000 mm² Possibility of insulating with different materials and heat-shrinkable ...
Ohmite S series shunts are Ideal for lab environments or other applications requiring current handling up to 1200 amps. Large brass terminals are available in multiple types with the resistive element produced in a plate style construction. ...
The Silea couplers are designed to use in the petrochemical industry to fulfill the requirements of dry coupling. It is quite safe to use, because it is designed according to the regulations of API RP 1004 standard. You will get 4” TTMA ...
silea liquid transfer srl
Electronic Grup, S.L
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining