Other connectors and accessories

... Male headers -are used to connect overlying PCBs -within the total length of the pin the insulating body is variable upon request -separable! every requested number of contact can be delivered ...

... Contact blocks with spring loaded terminals NC SeriesAUXILIARY CONTROLS, PegasusAutomation - VersionsContact blocksAutomation - TipologySpring loaded terminals ...

This line of Socomec power terminals is highly efficient and effective, suitable for use in providing connections for multiple power circuits. The power terminals consists of connection plates that are fixed onto insulating brackets, ensuring the safety ...

... - Short, compact size - Board-to-board contacting - Distance compensation - Tape on Reel - SMD / Automated Assembly - 2 to 20 poles / 1 and 2 rows available ...

The output coupler usually has reflectance in the range 40% to 70%. In order to optimize power and spatial profile of the laser beam, the output coupler and end mirror have optical surfaces with well-defined radii of curvature. The output coupler is typically ...

... Crompton Instruments DC DIN Shunts A range of direct current shunts which provides an accurate millivolt signal, exactly proportional to the system current. They can be used to drive ammeter indicators, overload protection and control devices. These ...

This coupler is ideal for lubricating agricultural, construction, industrial, trucking, automotive and commercial lawn equipment – anywhere a grease gun is operated. The Lever-Action Coupler provides easy attachment and removal from the fitting. Its excellent ...

Diameter: 16 mm - 50 mm
Length: 20 mm - 32 mm

... MaterialNickel-plated brass Sealing ringsNBR Operation temperature-40°C / +100°C Protection classIP 68 PropertiesMultifunctional use in combination with cable- or conduit glands, smooth rotation due to a special bearing Entry threadM16x1.5 Wrench ...

... Load monitoring PROFINET Bus coupler PROFINET Bus coupler for LCOS CCI and LOCC-Box NOTICE: It is mandatory to order a corresponding LCOS function carrier with power supply (FTE) for the bus coupler. 1. if this PROFINET bus coupler (778000.1301) ...

Diameter: 12 mm - 50 mm

... Temperature range - -40 °C - 100 °C Material - Polyamide, fibre reinforced ...

Primary current: 4 A
Voltage: 60, 250 V

The thermal resistance of this high-temperature cable extends from -190°C to +260°C. Due to its fully fluorinated jacket and wire insulation, the cable is perfectly suited for applications in high-frequency cables, as control cable in critical temperature ...

Hytec offers both an economical standard poppet type coupler and labor-saving push-to-connect flat face coupler. Both styles are rated at 5,000 psi that has 1⁄4”NPTF connections. The standard coupler is recommended for lower cycle applications where two ...

Primary current: 4, 3, 1 A
Voltage: 125 V

... Connector locking systemBayonet Terminationsolder Wire gauge (mm)0,25 mm² Wire gauge (AWG)24 Degree of protectionIP40 Mechanical operation> 500 Mating cycles Upper limit temperature85 °C Lower limit temperature-40 °C Rated impulse voltage1500 ...

Primary current: 1.5 A - 16 A
Voltage: 277, 60 V

Circular connectors that combine an easy to use 30 degree locking mechanism with proven environmental sealing up to IP68 and IP69K. Available with rugged metal or plastic housings, they are ideal for applications where ingress of dust and water must be ...

DIAMOND OLiD patch cables and pigtails are based on FBG (Fibre Bragg Grating) technology and are suitable for permanent installation in P2P fibre optic networks. They can be installed anywhere along a fibre optic line, however mainly in central office ...

As an innovation leader, ERNI continues the success story of compact and robust SMD connectors with the MicroCon series. These are miniaturized double-row Finepitch connectors with a grid dimension of 0.8 millimeters and available with different numbers ...

... Connecting Elements Connecting Elements are used for connecting standard units to strut profiles. ...

Primary current: 4 A
Voltage: 250 V
Operating temperature: -40 °C - 90 °C

... M12 FIELD ATTACHABLE,FEMALE,90°,4P.,PG7 Family: Angled 90° - 4poles ...

Voltage: 50 V

... The rearTWIST HD BNC cable connector offers a true 75 Ω design and is perfectly suitable for HD applications. The patented rearTWIST boot guarantees easy access even in high density applications and offers color coding. Suitable cables: Belden 1855A, ...

... two-row right-angle crimp terminal • Cable ends can be secured to the circuit board • 90 ° connection • Available with both threaded and through hole options • UNC threads available or customized to customer requirements • It can be used as a fixing ...

... Adaptors from industrial to domestic systems and vice-versa IEC309 One-way adaptors are available as system adaptors, configuration adaptors, current adaptors and phase sequence adaptors. These pratical adaptors solve a constantly recurring problem ...

... Universal standard connector conforming with IEC 61754-4. Specified / recommended for LAN cabling according to ISO/IEC 11801 and EN 50173, the SC is the most common fiber optic standard connector. * single mode and multi mode * push-pull mechanism * ...

Primary current: 120 A
Voltage: 270 V

... This 270VDC ground-power receptacle was developed under contract from Boeing Sikorsky and is shown by permission of Sikorsky. The mating plug/cable assembly was also designed and manufactured. This receptacle is used on the RAH-66 Comanche helicopter ...

... Copper data Office cables Office data cables for future requirements The data transmission according to 1-10 Gigabit-Base-T is based on a full-duplex principle i.e. via all cable pairs at the same time and parallel in both directions (bi-directional). ...

... Fiber Optic Patch Cord Description A patch cord is always fitted with connectors at both ends.A pigtail is similar to a patch cord and is the informal name given to a cable fitted with a connector at other. Features Conform to IEC, EIA-TIA, ...