- Electricity - Electronics >
- Cable, Connector, Enclosure >
- Other connectors and accessories
Other connectors and accessories
Pin header SMT type 2 rows pin square 0.30 mm Technical specifications Current rating : 1.0 A Dielectric withstanding voltage : 500 Volts AC during 1 mn Insulation resistance : > 1000 MΩ Contact resistance : < 15 mΩ Operating ...
ANTELEC
Primary current: 1 A
Voltage: 500 V
Pitch: 1.27 mm
Box header right angle type pin 0.40 mm Technical specifications Current rating : 1.0 A Dielectric withstanding voltage : 500 Volts AC during 1 mn Insulation resistance : > 1000 MΩ Contact resistance : < 30 mΩ Operating temperature ...
ANTELEC
Primary current: 1 A
Voltage: 100 V
Pitch: 1.25 mm
Wafer straight & right angle type with walls Technical specifications Current rating : 1 A AC, DC Voltage rating : 100 Volts AC, DC Dielectric withstanding voltage : 500 Volts AC during 1 mn Insulation resistance : > 500 MΩ Contact ...
ANTELEC
elmex distribution blocks are an Innovative Engineering Solution to satisfy customer's needs. They find application in Power Distribution for Control Circuits and can also be used to centralize earthing for the entire panel. These blocks ...
Reliable signal transfer and consistently low contact resistance For the connection of the interface blocks, signal, high current, radio frequency, optical wave guide, pneumatic, mixed and specialised blocks are available as standard ...
Press Welded Flexible Copper Shunts This type of flexible connectors are made of several copper sheets overlapping each other. The contact resistivity in between each folio is almost zero as the contact areas are produced without ...
FİGABARA PAZARLAMA VE DIŞ TİCARET LTD. ŞTİ.
Press Riveted Flexible Copper Shunts Press riveted flexible copper shunts are made of several copper sheets overlapping each other. The contact areas are formed by assembling copper plates placed on top and the bottom of copper ...
FİGABARA PAZARLAMA VE DIŞ TİCARET LTD. ŞTİ.
Aluminium Flexible Shunts The aluminium flexible connectors which are produced by welding several overlapping aluminium sheets to aluminium bars. Application Areas of Aluminium Flexible Shunts; - Expansion joint between circuit ...
FİGABARA PAZARLAMA VE DIŞ TİCARET LTD. ŞTİ.
Newport’s High-Performance Benchtop Couplers and WDMs feature male bulkhead connectors instead of fragile fiber pigtails. These broadband couplers are offered with FC/PC or FC/APC connectors and are optimized for operation at 1310 nm, ...
Couplers are RF passive devices used for coupling a specific frequency from inputted RF signal. This product is used for power level control of transmitter. Murata delivers high performance LTCC packaged product by multilayer ceramics ...
Murata Electronics
The TNT adapter receives digital terrestrial television signals distributed by terrestrial television transmitters. It is used to interface with non-TNT compatible televisions. Our models guarantee high definition image quality and ...
This fieldbus coupler connects the WAGO I/O System 750 to PROFINET IO (open, real-time Industrial ETHERNET automation standard). The coupler identifies the connected I/O modules and creates local process images for maximum two I/O ...
Open top THT socket solution suitable for BGA packages with 0.50 mm pitch 2-point Tweezer Style contact system to nip the sides of solder balls to prevent damages of co-planarity of solder balls Open Top solution suitable for autoloading Compact ...
Yamaichi Electronics
Primary current: 15, 10 A
Voltage: 250 V
Operating temperature: -25 °C - 120 °C
• Cord Connectors (Rewireable): Screw • Connector, Pin temperature 120 °C, Protection class I • Wire size 0.75-1.5mm², 18AWG-14AWG (0.82-2.08mm²) • Cable diameter 6.0-10.0mm • Protection cover as accessory for IP67 / IP69K unplugged • ...
T&S grade B patchcord is the patchcord with the random mating performance of Grade B as IEC-61753-1 defined, more than 97% of maximum 0.25dB random mated with each other and the average is less than 0.12dB. Simplex, duplex grade B patchcord ...
T&S Communications
CRXCONEC new Category 8 Patch cord is GHMT verified based on the CAT8 channel performance test and followed the cat8 standard of IEC60512-99-002 PoE type III. To ensure the quality meet cat8 network cable installation requrirment, our ...
CRXCONEC
Impedance: 10 Ohm
Primary current: 60 A
Voltage: 50 kV
-Wide range of housing types and contact block variants -Original standard push-pull locking system -Up to IP68 sealing (liquid tight) -Hermetic versions available (gas tight, vacuum tight) -Resistant to autoclave sterilization -10,000 ...
Fischer Connectors
Splice cassette Fibre optic Highlights - For installation in a protective enclosure in accordance with DIN EN 60079-0 Standard and customised enclosure versions available For professional and time-saving FO installation in Zone 1 and ...
Eaton’s CH160 Series of Power Terminal Blocks are UL 1059 recognized power terminal blocks for branch circuit applications. The CHDB Series of Power Distribution Blocks is designed for high short circuit current rating (SCCR) applications ...
The Clicktouch membrane switches are reliable and cost-effective keyboards that are based on the certified Click touch technology. It offers highly reliable dust, water, scratch and chemical resistance. The keyboards are easy to use and ...
DIAMOND OLiD patch cables and pigtails are based on FBG (Fibre Bragg Grating) technology and are suitable for permanent installation in P2P fibre optic networks. They can be installed anywhere along a fibre optic line, however mainly ...
DIAMOND SA
Connecting Elements Connecting Elements are used for connecting standard units to strut profiles.
Modular Assembly Technology
Conical ring coupler KM SDR 17 Gas and water Maximum pressure: Gas 5 bar; Water 10 bar Material; PE 100 Combination of coupler and clamping coupler Problem solver (pipe ovally and different diameters) Safety technology Separate ...
Aliaxis
Operating temperature: -55 °C - 95 °C
TSN series fluid connectors are widely used in various liquid cooling systems, mainly for the connection of large-flow liquid cooling equipment. Tri-groove locking mode to realize the quick connection. Self-sealing and prevent leakage ...
AVIC JONHON OPTRONIC TECHNOLOGY CO., LTD.
-(2) mounting flats attach Standard ATI Utility Modules. -(10) integrated pass-through air ports with G1/4 or 3/8 NPT connections. -Drive cylinders and linear actuators available. -Hardened stainless steel alignment pins. Compliance ...
ATI Industrial Automation
● With reflow soldering pin head ● Combined usage with HFLS1H41-500 ● Plug-in direction is vertical to PCB Detailed parameters Poles - 2~24 Pitch - 5.00mm Rated Dielectric Strength - 2200Vac/min Rated Withstand Pulse Voltage - 4kV Ambient ...
Shunts for direct current measure lt gives a mV signal directly proportional to the measured current Primary current 1...6000A Voltage drop 60 - 100 - 150mV Accuracy ci. 0,5 Dimensions according to DIN43703
Coupler, female, including steel dust cap • Connection: M22 x 1.5 male • Fits: Y 219
Holmatro Industrial equipment
5-pin female standard (friction, not latching) right-angle connectors on both ends of a 5-conductor round shielded 24 AWG cable.
US Digital
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining