... Test adapter for electric vehicle charging station Application: Simulate the connection of an electric vehicle to the tested charging station, trigger the charging process by selecting the PP and CP states and generate errors to check the safety ...
... Application : The shunt is a box used to ensure, before replacing a melted fuse on the conductor, that the failure is well removed. The shunt may also be used to open the circuit for accessories replacement on the network. Features : ...
... Overview
The LF series distributed I/O system consists of the LF series communication coupler and XF series modules. A high-speed backplane bus between the coupler and modules enables microsecond-level response, making the system suitable for ...
... Overview
The L series remote I/O system pairs the Xinje EtherCAT communication coupler LC3-AP with XL or LL series I/O modules to form flexible distributed I/O solutions. The system supports configurable combinations of module types and quantities ...
... The A 1722 PRCD Adapter is a multi-function test adapter intended for safety and functional testing of different types of 1-phase and 3-phase PRCDs. KEY FEATURES • Simulation of errors on input mains • Accessible Inputs/Outputs for easy connection ...
METREL
... The A 1532 EVSE XA adapter is used for verification of electrical safety and functional testing of EVSE together with supported METREL installation testers. KEY FEATURES • Banana socket outputs for connection to a 3-phase installation tester • Voltage ...
METREL
... The A 1507 3-Phase Active Switch is an accessory intended for automating the process of electrical safety testing of three phase circuits. KEY FEATURES • Banana socket outputs for connection to a 3-phase system • Motor driven through Bluetooth communication ...
METREL
... Safety factor 6:1 Part without load-bearing welds Material : high strength alloy steel Can be used for multiple leg slings ...
Length: 127 mm
... ALMEMO® trigger output interfaces RTA3 • Universal trigger output interface for connecting to output sockets on ALMEMO® devices - from version V6 up (not 2390, 8390). Device firmware update may be needed. • Up to 10 peripheral elements (relays, trigger ...
Length: 2,000 mm
... Product description
Adapter cable for connecting a motorized focus drive to a TANGO controller (connection: Motor 1-3). Designed for use when a scanning stage with two fixed cables is installed simultaneously.
Additional information
- Adapter
... Product description
This fieldbus coupler module provides PROFINET interfaces and complies with PROFINET IO Device Conformance Class B. It includes Dual-Port Ethernet with an integrated switch for flexible network topology and line‑topology ...
... Sensata Technologies provides circuit-on-demand from a pre-wired power bus. The Airpax™ modular distribution system utilizes "plug 'n play" capabilities to simplify the design of your power bus system. The module design simplifies line/load interface, ...
The NIVUS WebPortal is a comprehensive data management system for storage and provision of measured data. Thanks to storage on the web portal there are versatile options available to analyse readings, for system verification, data forwarding and alerting ...
... Shunt values for measurements between 1mA to 100A Low inductance & capacitance flat frequency response AC/DC differences from 1ppm From DC to 30kHz Simplifies precision calibration of calibrators and current sources Can be used with a precision multimeter ...
... Precision current shunt array Values 10mA through to 10A 1 year stability of up to 5ppm 4-Wire PT100 Output Temperature coefficients of less than 0.6ppm/°C The 3000CS provides a precision set of current shunts for current ranges from 10mA through ...
Diameter: 2.5 mm
... Overview
AC/DC desktop power adapter TR9KZ3158LCP-N(R6B), 60 W, 19 V ⎓ 3.16 A, 2.5 mm output plug. Suitable for industrial and embedded applications requiring a compact 60W desktop supply.
Key features
- Type: AC/DC desktop
... Nickel plated brass body. Material Black or red thermoplastic, glass fiber reinforced. ...
... Zinc plated steel body. Material Black or red phenolic plastic. ...
The shunt is a passive component allowing DC current to be measured. When the shunt is calibrated with precision within a 0.2% accuracy class, measuring the voltage drop between its two terminals enables to calculate the exact current value going through ...
... COIL Adapter XTRA for Inter-Turn Short Circuit Test Adapter for inter-turn short circuit detection at inductances ranging from 10 µH to 5 H The coil adapter XTRA permits semi-automatic inter-turn short circuit measurements in combination with the ...
GOSSEN METRAWATT GmbH
Length: 1.5 mm
... Single/3-phase test adapter for testing the functionality and effectiveness of protective measures at e-charging points in combination with the METRALINE MF installation tester The new METRALINE EVSE IT adapter offers increased flexibility at work ...
GOSSEN METRAWATT GmbH
... Test adapter for electric charging stations (single-phase, type 1) for PROFITEST Single-phase test adapter with type 1 plug for testing the effectiveness of protective measures at electric charging stations with the PROFITEST Master, simulation of ...
GOSSEN METRAWATT GmbH
The CPL1 and CPL2 external quadripoles are designed to connect the MPD 800 partial discharge measurement device to a capacitance (coupling capacitor or test object), which generates a reactive current larger than the current that can be directly handled ...
... Precision shunts for current measurements C-Shunt 1 and C-Shunt 10 are precision shunts for current measurements. They can be directly inserted into the binary/analog inputs of OMICRON test sets such as CMCs or COMPANO 100. ...
This grey-colored polymer-clad sensor cable adaptor is intended for our low- to medium-temperature sensor cables, converting their 4-pin Lemo connector into the 8-pin Lemo connector needed for connection to our instruments (and switch units).
The Needle Test Adapter is an essential tool designed to provide mechanical support to the PCB, ensuring it can be stably inserted and fixed on test equipment. This allows for effective functional testing, verification, and troubleshooting of the PCB, ...
... Product VOLTAGE DROP (SHUNT) - Cod. SHUNT
Description Current shunt for DC measurement. Accuracy class 0.5% with a nominal voltage drop of 60 mV. Versions for 10 A and 25 A are supplied with an insulating plastic socket for mounting. ...
... Product
ADAPTER CABLE
Code: PFC3555
Mandatory adapter cable for connection of the specified antennas to compatible receivers and accessories.
Compatibility
- PFC3420 antenna
- PFC3545 antenna
Technical ...
... System overview
The system comprises a handheld unit CT100-W which, when connected to the POS, reads product prices and transmits them wirelessly to flags, totems and all LED price displays equipped with the WT868-O receiver. The CT100-W continuously ...
Voltage: 250 V
Operating temperature: -25 °C - 80 °C
... LED - NO LED Number of pins - 3 Housing material - Matt nickel-plated zinc Cable length - 2 m Cable color - black Wire cross-section - 0.34 mm2 Product Range - Cable connector weld immune ...
CONTRINEX
The SM-CFTx is a compact single mode fiber coupler designed for compatibility with CFC connectorized fiber chucks. It utilizes vibration-resistant OTX.5 series multi-axis optic positioners, capable of withstanding a 3G jolt without movement, ensuring ...
Length: 470 mm
The adapter box PRO-SPLIT enables the operation of up to four stud welding guns on one stud welding unit. Thereby, different adjustment values for each gun can be stored on the stud welding unit. When a gun is used the previously stored values for this ...
More and more charging stations for electric cars being installed across Europe. Testboy has developed the TV 900 measuring adapter, in order to be able to test the Type 2 charging stations standardized in Europe. The TV 900 takes over and simulates the ...
... Product overview
The kineMATIX® is a patented optomechanical mount designed to align iFLEX® laser system beams into a single-mode fiber. It is supplied as the manipulator included with kineFLEX® Fiber Delivery Systems and is optimized for retaining ...
Voltage: 25, 70 V
... Models AM25CK, AM70CK, 300CK, E-300CK and T-300CK Interfaces SelecTone® amplified speakers with an existing paging system Works in 25 or 70 Vrms systems Creates a “balanced line” SelecTone® System Models AM25CK and AM70CK are CSFM Approved ...
... • Measurement without the nuisance of additional modules: Unlike conventional wireless solutions, which have a large external transmitter with separate battery, the transmitter in Integrated Wireless is fully integrated. • Highly mobile: Integrated ...
... The AMS-DIG-USB is a USB adapter for the AMS-DIG-PROC board. It is designed to be an easy tool for rapid prototyping and proof-of-concept work. Features Compatible with the AMS-DIG-PROC board Communication over the standard USB interface Power supply ...
Rubber rings for GP coupling. Made in Italy rubber elements.
AB TRASMISSIONI SRL
... Quick and full diagnostics of charging stations Adapter allows to perform comprehensive measurements of electric vehicle charging stations - quickly and in accordance with applicable regulations. Simulating the charging cable (proximity pilot line ...
Sonel SA
... Poppet or ball valving couplers. «H types» are screwing couplers, «R and P types» are quick connecting couplers. Fitted in standard with plastic dust caps and plugs. Quick connecting couplers, poppet valving, fitted with safety sleeve lock to prevent ...
... Construction Brass screw terminal blocks double-deck Housing made of self extinguishing material Cover and separating made of polycarbonate Application Proper and transparent connecting cables in low voltage distribution boards Advantages TH35 ...
... Copper sheets for soldered connections at the ends. They have a tinned red finish and a thickness from 0.1 mm. At Bronmetal we have a wide selection of shunts or copper sheet connections in different formats so that you can choose the one that best ...
... High current solution made with high permeability high performance materials avoid saturation problems at high currents Low insertion losses 12dB±2dB (@100-250kHz) ; 5dB±2dB (@250-600kHz) More electrical safety: High insulation > 4.7 kV Compact equipment: ...
... Aircom® End Node is a self-contained, battery-powered communications device capable of collating data from various instruments and sending data packets to a gateway. It is intrinsically safe and approved for hazardous environments (Class 1 Div 1 / ...
... Contact Pads and Plates Prevent arc burning and ensure reliable electrical contact Our contact pads come in a variety of shapes, sizes and types to make sure your magnetic bench is outfitted correctly for the parts you inspect. Magnaflux contact pads ...
... The Flexslice system begins with the coupler. The coupler is connected to the network via the upper Ethernet interface. The lower RJ45 socket may be used to connect further EtherCAT devices in the same strand. The bus coupler supports up to 16 input/output ...
Length: 66 mm
... Overview
This 6W single-output AC-DC wall-mount adaptor GS06E-3P1J by Mean Well provides a 12V DC output at 0.5A and is compatible with positioning laser series and a wide range of ITE devices. It is a Class II unit (no FG) with a 2-pin European ...
... FL series DC Shunt is available to measure DC currents. This DC shunt can provide a proportional 50~100mV DC output to safely drive a moving coil instrument, overload protection, or other control device. The manganin shunts have brass ends, available ...