Other forestry equipment

• Splitting force 8 t • Max. wood diameter: 40 cm • Cylinder stroke max. 54 cm • 1 hand comfort controls with independent return stroke • Adjustable splitting stroke • 4-way splitting wedge as standard, hydraulically adjustable ...

In comparison to what the market has to offer, the Doppstadt high speed grinder AK 310 EcoPower arguably gets the upper hand in terms of process and cost efficiency. The machine uses a compact six-cylinder in-line engine of the MTU ...

Kinetic Log splitter BELMASH is a unique device for chopping firewood. Standard hydraulic log splitters are too slow! It takes much time to transfer pressure through the hydraulic system! The new BELMASH log splitter is equipped with ...

Stump grinder Standard Stump grinder for heavy drilling unit

AXSEL PC40 -PC44 - PC48 Press collector The AXSEL press collector is ideal for transporting large volumes of forest residue. The compression of the load during transportation enables 2 to 4 times the capacity to be loaded. The C-frame, ...

* Standard flow model has a 660mm diameter cutting wheel allowing up to 254mm below ground cutting. * 60° range of motion covers 1143mm in a single sweep. * Tooth pattern permits cutting from side-to-side and vertical directions. ...

HYDRAULIC LOG SPLITTERS FH 7023 maximum splitting power 7tons 1 fixed table and 2 height-ajustable tables Splitting length 0.56m, 0.8m and 1.15m "Two-hands" synchronization to hold the wood

1. - This machine is mainly composed of châssis, shredder, power engine (diesel engine or gasoline engine), machine base, transmission belt thrower, etc. 2. - The shredder is composed of fully welded Steel plates. It has a unique 8-knife ...

The wood chipper attached to your Knikmops is ideal for shredding branches. You can also very easily reach the most difficult spots with your wood chipper, since it is attached to the Knikmops. Because of this, you don't need to awkwardly ...

Power: 45 kW - 250 kW

DESCRIPTION Drum Wood Chipper is used to process wood chips Product Description: The drum chipper is a special equipment for preparing high-quality wood chips. It is suitable for various paper mills, particle board mills, fiberboard ...

JDB-1000M Semi-automatic PE Bundling Machine Features of the machine： ●Time, cost and manpower saving. ●Easy for operation, no need for special training. ●No need to adjust different size bundling ●Safe and simple operation. Usages： The ...

A Wood-Mizer debarker cleans up the log before each cut, preventing your blades from hitting mud, rocks, or debris that might damage them. Keeps mud and dirt away from your blades Say good-bye to the days of power-washing your logs. ...

Description Cable carriages for the crane (beam crane) from the manufacturer “Alexandrian crane systems”. Used to ensure uninterrupted power supply to moving parts of the crane. In addition to holding the power cable, the suspensions ...

Lift capacity: 550 kg - 2,100 kg
Working height: 0 m - 9 m

“Z” series cranes are designed to operate at high speed and at the same they are manufactured with a very solid structure. This specific feature makes them suitable for several uses, among which the forestry field. The possibility of ...

The CRG drafting carriage series is designed for intense working cycles, as they combine robustness and lightness These carriages are equipped with anti-sliding braking blocks on the carrying and pulling cable and are remotely-controlled: ...

Tube blockages in extraction tubes, in filter- or bunker systems are not only annoying but cause high costs due to interrupting the current production. The installation of an inline chipper from Höcker Polytechnik reliably helps to avoid ...

Power: 2.2 ch

Garden-line | electric wood chipper Power 2,2 Hp Workable branch diameter 37 mm (1.46 In) Feed height 840 mm (33.07 In) Width 620 mm (24.41 In) Description The E100 Garden-line scarifier is a compact, light, but robust chipper ...

Automatic bundler for roll collections with total closure package. The entry of rolls is in multiple lanes for extremely high performances.

Lift capacity: 420, 620 kg
Working height: 4.3 m

Forest crane with 4,3m total reach Our forest crane has a total reach up to 4,3m. Highest quality standards at a particularly favorable price-performance are provided. This crane was designed for hobby and semi-professional users ...

This is a new product in our forestry line. The trunk splitting grapple is available in 3 models and can be hitched to the forestry loader or other machinery.

Width (cm): 150 Weight (kg ): 180 Height (cm): 200 Number of blades: 2 Chip size (mm): 4-12 Chipping capacity/m3/h: 2-6 Tree max diam. (cm): 10 Nr: 870138

Product Range Log Splitter Process and Recycle Logs with Ease It’s quick and efficient. Augertorque’s compact and robust Log Splitter makes light work of processing those fallen trees into manageable pieces. As the Log Splitter rotates, ...

Motor power: 285 ch

A Quantum Step in Mobility and Flexibility. The new innovation Highlander is a high-performance harvester for middle and strong sized timber. The KONRAD HIGHLANDER In normal harvester terrain, the HIGHLANDER can move with special ...

Operating weight: 14,700 kg
Motor power: 164 kW

The Gremo 1050H is a reliable harvester ideal for thinning and final cutting. The new engine, strong as an ox, together with the big working pump produces sufficient hydraulic power for any imaginable situation. This means shorter working ...