Maximum temperature: 20 °C - 1,200 °C
Capacity: 5 l - 100 l
Width: 100 mm - 2,000 mm
... Standard power, size and shape or as indicated by the customer. Complete electrical BOXES with CONTROL and SAFETY systems (thermocouples). Stainless steel casing. Room insulation with technical material REFRACTORY and FIBROCERAMIC. Heating ...
ProSens is a new line of modern industrial instruments, which integrates sensors, converters, meters and controllers functionalities. Using the latest miniaturisation technologies these compact instruments are able to be equipped with one independent ...
The Multicon are powerful and versatile compact-multichannel-controllers with a capability to record data, if the recording function is requested and activated. MultiCon CMC‑141 has all features included in CMC-99, but in addition it has a bigger display, ...
... MultiCon = Meter + Controller + Recorder + HMI + SCADA in one package stable firmware based on Linux 13 available input/output blocks colour LCD display 3,5" TFT, with touchscreen recording data with maximum speed 10Hz (ten samples ...
It is used for production of jam, marmalade, molasses, tomato paste, ketchup, jelly and the products will be evaporated. It is used to cook the product at a boiling temperature of approximately 55-60°C under an average of 600-650mmHg vacuum. The natural ...
TABANLI MAKINA SAN VE TIC LTD STI
It is used for production of jam, marmalade, molasses, tomato paste, ketchup, jelly and the products will be evaporated. It is used to cook the product at a boiling temperature of approximately 55-60°C under an average of 600-650mmHg vacuum. The natural ...
TABANLI MAKINA SAN VE TIC LTD STI
It is used for production of jam, marmalade, molasses, tomato paste, ketchup, jelly and the products will be evaporated. It is used to cook the product at a boiling temperature of approximately 55-60°C under an average of 600-650mmHg vacuum. The natural ...
TABANLI MAKINA SAN VE TIC LTD STI
In the wood industry, these ovens use gas-type infrared heaters to safely and quickly dry varnish, lacquer, and other wet paints on furniture, eliminating fire risks. The drying process operates at approximately 40-60°C, and the ovens are easy to install ...
Maximum temperature: 250 °C
... In powder coating applications, box type ovens are used during the curing stage of the paint and can be manufactured with electric resistances or liquid/gas fuel burners. Their operating temperature can reach up to 250°C. They work on the principle of ...
Maximum temperature: 250 °C
In powder coating applications, conveyor type ovens are used during the curing process and are manufactured with electric resistance heaters or liquid/gas fuel burners. Their operating temperature can reach up to 250°C. They operate on the principle of ...
... Frigojollinox vacuum cookers and kettle cookers are extremely versatile systems, ideal for those who want to transform any type of food raw materials. The extreme customisation of the process allows you to perfectly calibrate the system to the type of ...
... The application of the Green Blow Air Line in the food sector, and gamme IV (fruits and vegetables processing), has forced us to design components that comply with high hygiene standards against accidental contamination in food preparations. The same ...
Maximum temperature: 25 °C - 1,100 °C
Our pyroxydizer furnace makes it possible to carry out controlled pyrolysis (under inert gas) followed by combustion (under oxygen) of your samples. Whether these are liquid, solid or gaseous, the pyrolyser ensures their total or partial mineralization ...
Maximum temperature: 600, 1,200 °C
... Specialized in manufacturing custom tubular furnaces for more than 40 years, we now offer you our catalog of laboratory furnaces. The Design and production of Customized tubular furnaces for our customers led us to see a recurring trend of products ...
The Meringange is a conical furnace from Eraly that is designed to measure the expansion capacity of polyvinyl chloride (PVC) tubes when their heated. It does its measuring function by getting the expansion rate of a PVC plate during combustion under ...
... Fluxing and drying plant for dip soldering machines Dimension is compatible to soldering unit Fine-pored foam fluxer with adjustable wave-height, powerful diaphragm pump Flux reservoir out of stainless steel 2000VA heating plate with cover for drying ...
Maximum temperature: 950 °C
Capacity: 1,570 l - 3,790 l
Width: 1,780 mm - 3,080 mm
The GFM product line was developed to meet the special requirements of production. For different applications different table depths can be supplied. Standard is a table for fusing. Various tables and tubs with different heights and numerous additional ...
Nabertherm
Maximum temperature: 550 °C
Capacity: 75 l
Width: 870 mm
... Top-loading (shaft) low temperature electric laboratory furnace SNOL 75/550 is intended for electrodes, drying, preliminary heating, hardening, loosening, normalising and other thermal processing up to temperature of 550°C. The furnace is excellent fit ...
SNOL
Width: 1,250 mm
Height: 3,450 mm
Depth: 3,200 mm
... This furnace is a heat treatment system for silicon wafer, IGBT, polyimide and thin wafer oxidation, diffusion and CVD. As our flagship model, this furnace is equipped with a large-capacity stocker and features a short cycle time. Features Large batch, ...
Koyo Thermos Systems
Some workpieces are too large or are very contorted structures. Our special heating systems can tackle any challenge. For example as preheating boxes for the preheating and stress relief heat treatment of workpiece and drop forge parts. Or as a two part ...
MultiVap-8The new LabTech MultiVap-8 automatic parallel system increases the capacity and sample throughput in laboratories and maintains quality and low cost. With this system it is possible to evaporate to solid state or concentrate into a fixed end-point ...
LabTech Srl
Labconco offers a wide range of concentrators and evaporators to meet your sample prep needs. CentriVap Concentrators use a combination of centrifugal force, vacuum and heat to speed evaporation of small samples. RapidVap Evaporation Systems use combinations ...
Maximum temperature: 1,250, 1,300 °C
Capacity: 5, 10, 20, 40, 60 l
... Medline’s MD1305, 5 Litre Chamber Furnace provide a strong level of versatility without compromising quality, safety or reliability. Furnaces can be used in quality control tests, ashing, heat treatment, preheating, melting, metallurgical research ...
Maximum temperature: 300 °C - 1,200 °C
Capacity: 3, 1.9 l
... Ideal for: • ash-determinations, enameling, fusions, precipitate drying Features: • user‘s self-compensation function for temperature (±50.0°C) • resolution: 1°C, 1 min • ceramic fibre plate included • powder-coated steel body, ceramic fibre insulation, ...
Maximum temperature: 1,000 °C
Capacity: 7.2 l
Width: 74 cm
... 5E Series Muffle Furnace is used to determine the ash, volatile matter in coal, coke, biomass and other organic material. Standard Configuration: Main analyzer Ash crucibles Volatile matter crucibles Lids for volatile matter crucibles Holder ...
Maximum temperature: 200 °C - 1,200 °C
... The structure of the high-temperature atmospheric furnace unit consists of a furnace shell, upper/lower end covers, insulation plates, muffle tubes, heating elements, electrode plates, insulation layers, etc. The furnace shell, upper/lower end covers, ...
Maximum temperature: 2,300 °C
Capacity: 75 l
Width: 40 cm
The Cristal range is made of furnaces dedicated to heat treating under vacuum at high temperatures. The enclosure is insulated with specific metals, with a possible choice of molybdenum or tungsten resistors. It is the perfect tool for clean treatments ...
ECM Technologies
... Large capacity – holds up to fifty slides! Temperature range from ambient to 100°C Drying bars included for easier slide drying Slide warmer facilitates tissue mounting and slide staining procedures, and is specifically designed for chemical, biological, ...
... Crucible capacity 300 cm³ or 500 cm³ Large valve opening Precise and very fast flux control High purity operation conditions Easy handling and refilling procedure Integrated water cooling shroud The Valved Arsenic Cracker Source has been designed ...
Trotec VX 5 MultiQube is a full replacement to VE 3 or VE 4 thanks to its three levels of performance. Level 1 is that its performance is equivalent to a VE 3. Level 2 is VX5 is 10% stronger in comparison to the highest performance provided by VE 4. Level ...
Trotec GmbH
Maximum temperature: 0 °C - 1,320 °C
... Specific benefits The Ipsen Titan is a compact vacuum furnace which can be used for a wide range of heat treatment processes. It is ideal for treating small batches or individual workpieces, thus giving you all the benefits of energy-saving, resource-friendly ...
Ipsen International GmbH
S0 pulse collector that allows to connect up to 8 CONTAX S0 to communicate with the energy monitoring system through its RS-485 output and Modbus ASCII protocol.
Maximum temperature: 1,000 °C
It is a kiln for burning various materials such as the anode and cathode materials for rechargeable batteries, the high-precision temperature control, optimized air supply and exhaust system, and stable operation are the key features. In particular, it ...
HANWHA MACHINERY