Other tools

BC cartesian arms are completely designed and manufactured by Fiam and can be used with any type of tool with a diameter up to 50 mm and weight up to 11 kg. Choosing the BC arms is an advantage for ergonomics because: • They eliminate ...

Tapping capacity: 6 mm - 18 mm
Rotational speed: 140 rpm - 1,000 rpm

Fiam tappers: quickness and efficacy in every work situation Air tappers are the best solution for manual machine tapping, being fast to use and easy to handle, even when high quality standards are required. Fiam tappers combine ...

Fiam presents air cutters for fibreglass, sheet metal, leather and cloth. Fibreglass cutters have a unique diamond head. They are suitable for cutting of fibreglass in the manufacturing of boats, tanks and industrial automobiles. They ...

Cat. No. 75100 presented here includes a 50 kW titanium burner Cat. No. 50RL200 and the Raptor safety handle Cat. No. 660, with Piezo trigger and quick-release coupling.

Cat. No. 75101 presented here includes a 150 kW titanium burner Cat. No. 150RL400 and the Raptor safety handle Cat. No. 660, with Piezo trigger and quick-release coupling.

Cat. No. 75102 presented here includes a 150 kW titanium burner Cat. No. 150RL600 and the Raptor safety handle Cat. No. 660, with Piezo trigger and quick-release coupling.

For sheet steel or aluminium cutting work, PREVOST pistol-grip metal shears have all the attributes for precise cutting. You can use them to make a clean cut, with no burring, generating just one offcut. The tool lets you adjust the ...

The magnetic support BGFIXM is quickly installed and easily movable on metallic surfaces. It allows you to keep your tool available for work at any moment. Wall support bracket for blowgun with secure concept for a quick release, without ...

Cutting capacity in steel: 1.4 mm

If you have to cut flat or corrugated sheets of metal, aluminium, zinc or plastic, the PREVOST nibbler offers valuable advantages: Easy change of punch, adjusting screw for adjusting the cutting speed and progressive trigger to control ...

Diameter: 1 mm - 6 mm

The Frontchamfer, from CrazyMill is mostly ideal for miniature work piece machinery which Is able to reach all corners and angles. It is made of carbide alloy with 4 to 6 teeth, 90° chamfer and 1 to 6 mm or .04 to .24 measurements, all ...

Diameter: 1 mm - 6 mm

The Mikron CrazyMill Backchamfer provides convenience to machining applications as it can machine difficult to reach holes or edges behind a work piece without re-clamping and turnover. This machining device can offer miniature machining ...

Diameter: 0.36 mm - 5.7 mm

The CrazyMill Doublechamfer is designed with a single clamping front tool and a chamfering tool on the back end. This construction allows users to deburr hard to access areas and edges with both tool ends. The Doublechamfer is offered ...

... The Micro™ Edge Clamp has unique elavated clamping capabilities for through milling and drilling. The clamp's capabilities gives it increased versatility. The clamps can be mounted vertically or horizontally and features built in stops, ...

The Simultorc™ bolting process utilizes multiple HYTORC tools simultaneously on your bolting application. With reduced time during assembly and disassembly, Simultorc allows for fewer passes to complete the job, making the bolt load on ...

Custom-Made reaction fixtures guarantee safe and efficient work.

Disc diameter: 3 in
Rotational speed: 2,200 rpm - 7,600 rpm

VERSATILE: Equipped with a 2-speed gearbox, you have full control over the speed settings, so every job can be done the way you want. INCREASED PRECISION: Thanks to its side handle and ergonomic design, the 12V sander and polisher ...

Ingersoll Rand's 325B is a heavy-duty Air Nibbler used for sheet metal shops, paint, auto body shops, and tinsmiths operations. It cuts out quarter panels without damaging the edges of the material. Also, it offers excellent and bigger ...

Working length: 239 mm

The versatile 7802SA air cutting shear makes clean cuts in cold rolled steel up to 20 gauge without chips, making it the ideal tool for anyone in vehicle repair or machine shops.

Akyapak flanging machines are designed for speed and burn to run. It is accurately engineered for lowest vibration during flanging and robustness. The whole consturctions is electro-welded and stress relieved.Fully hydraulic control ...

Gimatic GN air nipper is available in five different sizes, it has a self-centering capability and it is a single-acting tool. It can be used with several standard size blades. The GN-S series are constructed with the use of magnetic ...

SKF Bearing Fitting Tool Kit TMFT series Helps prevent premature bearing failures Poor fitting, usually using brute force, accounts for 16% of premature bearing failures. SKF Bearing Fitting Tool Kits are designed for quick and precise ...

The SKF TMMK series designed for the quick and precise mounting and dismounting of deep groove ball bearings from shafts, housings and blind housings. The TMMK 10-35 suits bearings with bore diameters from 10 to 35 mm, whereas the TMMK ...

The TMMS series functions through the prevention of pulling forces, from being transmitted in the rolling elements, and outer ring. This operation minimizes the possibility for bearing damage. The device features a tri-section design, ...

The G1041 parting off blade introduced by Water is specifically designed for parting and grooving off applications on all types of lathes. It features minimized vibration with 32 mm and 26 mm V-guide length and an available right and ...

The Walter G1042 is used for chopping and grooving off lathes. It is equipped with parting blades and double-edged GX cutting tool. It has a 26 mm and 32 mm V-guide heights, adaptable tool projection, self-clamping system and 4-point ...

Walter's new parting blade adaptors for BMT/DO machines distinguish themselves from others in two key ways: The coolant flows through the adaptor, and the coolant is transferred directly through the parting blade to the cutting zone. Both ...

Lovejoy presents RunRight self-tensioning motor mounts suitable for all friction belt drives. The mounts transmit power free of maintenance and slippage, while providing ample protection to the belt. It eliminates the need for compensating ...

Four models to change distance between the motor and driven shaft Sliding “SMB” Type – extremely low profile, strong, and lightweight Sliding Cast Iron Type – original Lovejoy design, durable cast iron and steel Sliding ...

Power: 53 W - 70 W

The EVcc-PR Tank Inspection Light Series is ideally designed for ON-SHORE and OFF-SHORE operations supported by a compatible painting cycle (upon request). This tool also has an IP65 rating. It has a maximum temperature range of -52°C ...

Operator health is important! If your operators work with hand-held electric or pneumatic tools, the last thing you want is for their health to suffer. However light the tool, when an operator performs repetitive tasks daily, often with ...

Tapping capacity: 10 mm
Rotational speed: 700 rpm

The LGB36 H007Q: Pneumatic tapper, pistol grip model from Atlas Copco are of the highest build and quality to deliver consistent dependability and potential in a broad range of applications while their advanced ergonomic designs make ...

Power: 4.5 kW
Rotational speed: 0 rpm - 6,000 rpm

The GTG 40 hand-held grinder from Atlas Copco is arguably the most powerful hand-held grinder available in the market. It has a one-step turbine motor which offers great performance. The GTG grinder weighs less than 4.5 kg in spite of ...

FAREL range is a historic trade name of Oerlikon product, produced and designed in Europe. FAREL blowpipes are used for brazing, welding and heating applications. These are low pressure blowpipes. Product Advantages ✔ Reliability ✔ ...

FLAMOXAL is the solution of high heating power for: forming, preheating before welding, flame straightening, re-fusion after metallisation, descaling, pickling, surfacing... Product Advantages ✔ Reliability ✔ Safety ✔ Made in Europe ✔ ...

Crimping force: 132 kN
Diameter: 37 mm

Tubomatic S33PI is a particularly quick high volume crimper, especially designed to crimp low pressure, brake and textile hoses up to diameter of 37 mm. MAIN FEATURES: - air operated by air-oil multiplier; - wide crimping head ...

Circular saw blade diameter: 200 mm - 650 mm

Toothed and smooth blades available upon request. Diamond blades for special applications. Available Ø: 400 mm, 520 mm and 650 mm. They are ideal for cutting steel spiral hoses type SAE 100R4, that are hardwall smooth rubber hoses ...

Circular saw blade diameter: 400, 520, 650 mm

Diamond blades for special applications. Available diameters: 400 mm, 520 mm and 650 mm. They are ideal for cutting steel spiral hoses type SAE 100R4, that is hardwall smooth cover rubber hose suitable for suction and delivery of hydraulic ...

Tube diameter: 16 mm - 170 mm

Technical characteristics : - Basic stainless steel jaws Ø 2,75” to Ø 6,625” (70 to 170 mm ) - Included stainless steel auxiliary jaws Ø 0,625” to Ø 4,65” ( 16 to 118 mm ) - Cutting precision: perpendicular cutting <0.25 mm - Scalability: ...

Tube diameter: 5 mm - 78 mm

Technical characteristics - Ø 0,25” to 3”: very wide range of use - Cutting precision: - perpendicular cuts < 0.25 mm - seamless cutting -Weight:15 kg / 33 lbs (easy handling) - Ideal for use at worksites

Tube diameter: 0 mm - 120 mm

Technical characteristics - Basic stainless steel jaws Ø 1” to Ø 4,5” ( 24 to 121 mm ) - Included stainless steel auxiliary jaws Ø 0,25 to Ø 4,25” ( 5 to 108 mm ) - Cutting precision: perpendicular cuts < 0.25 mm - Dual-output ...

Blue PP Secure Cover Base has an overall diameter of 25.0 mm and overall height of 12.0 mm to conceal fastening components for a neat finish. Cap and Base sold seperately.

Benefits Fast assembly Easy to disassemble High tensile strength Conduit retained by rib No loose parts Application range In combination with protective conduit SILVYN® RILL PA 6 SILVYN® RILL ...

Benefits Fast assembly Easy to disassemble High mechanical strength Conduit retained by rib No loose parts Application range In combination with protective conduit: SILVYN® FPAS Fastening of ...

Signode’s GripPack strap cutter, enhances productivity and operator safety for applications that utilise steel or plastic strapping. The GripPack cutter quickly and effortlessly cuts through straps up to 32 x 1,45 mm thickness, steel ...

Tensioned steel and plastic strapping can be safely removed from packages, by using SIGNODE strap cutters and by following a simple set of rules. How to safely remove tensioned steel or plastic strapping - The operator stands ...

In applications where a single cloth cutting machine needs to perform several tasks, the Eastman 629X Blue Streak II is used. It is a straight knife, known for versatility in its function. The low profile, polished, streamlined baseplate ...

Brute Eastman 627X model is robust vertical knife machine created to cut a wide range of materials including strong fabrics or ply in bulk quantities using its sturdy motor. Engineered with durable and efficient materials, it allows ...

The 627VS is improved with its speed motor providing additional acceleration and operation while lessening the time costs. It features cutting of bevy of cloths or add number of ply. It runs at 4000rpms continuously with cross heads, ...

Clinching uses cold forming to produce two-layer or multilayer joints of metal sheets and/or profiles, similar to snap fasteners. By means of RIVCLINCH® joining technology, steel and stainless steel materials as well as aluminium and ...

The PASS series features powerful, portable tools and a hydraulic drive with compressed air booster. The all-purpose C-frame working head family is fitted with the superb PASS option (passive forward stroke system). The forward stroke ...

RIVSET® self-pierce riveting systems The product range for RIVSET® self-pierce riveting systems includes manual systems as well as systems for fully automatic production. They are designed for a wide variety of applications and can ...

Drill diameter: 1 mm - 35 mm
Rotational speed: 130 rad.min-1 - 520 rad.min-1

The benefits for you: Unique versatility, performance and cutting speed. Extremely wear-resistant, durable tool concept. Great flexibility and ergonomics thanks to lightweight design. Double drill motor guide for very large stroke. Durable: ...

Rotational speed: 0 rpm - 1,600 rpm

Hand-guided single-speed metal core drilling system for rapid and flexible use of core drills. Work up to 6 times faster thanks to innovative drilling technology: 5 mm deep centre drilling at 1600 rpm followed by disconnection of ...

Rotational speed: 0 rpm - 1,600 rpm

Hand-guided 2-speed metal core drilling system for universal use of core drills and twist drills. Work up to 6 times faster thanks to innovative drilling technology: 5 mm deep centre drilling at 1600 rpm followed by disconnection ...

Stahlwille 440 - crow-ring spanners are made of chrome Alloy Steel and have a chrome plating. They are available in lengths ranging from 23,8 to 83,2 mm and weights in the range of 11 to 295 g. The spanner opening ranges from 8 mm to ...

The Stahlwille 150 Express series are high performance pipe cutter designed to efficiently process copper, brass, aluminium and hard plastic tubes for various applications. In addition, the advanced units are equipped with two guide ...

Tube diameter: 3 mm - 35 mm

for use on copper, brass, light alloy, PVC and thin walled steel tubes, with deburring tool (3 cutting edges) inside handle, forged, chrome plated.