Power: 6 W - 6 W
The UV- and analysis lamp UV240 is used to determine the luminescence of UV radiation created by disturbances in the crystal lattice, and identify synthetic, composite gems and genuine or formed pearls. The UV series includes lamps with special filters, ...
... Groating, Flaking Oats, Rice, Spelt, Wheat, Rye, Barley No machine is more efficient: The SCHULE drum groat cutter boasts the best space/performance ratio. Via a continuously adjustable vibrating channel, the grain is fed into two perforated drums ...
... For beveling 0° and 30° Customized bits Corrosion protected Highest quality Made in Germany ...
DWT GmbH
... Perfect Weld Preparation For all DWT bevel machines Customized Bits Highest Quality Made in Germany DIN 2559-3 DBS 34-R3 DBS34-R5 Customized tool bits on request ...
DWT GmbH
... Working Range up to: 1219,2 mm Pipe wall thickness: max. 80 mm No heat affected zone (HAZ) with cold cutting Quick and safe clamping and adjustment Split-Frame Technology for endless thick-walled steel pipe Looking for the most efficient and precise ...
DWT GmbH
Diameter: 2 mm - 117 mm
... Chamfers any cylindrical, polygonal, or interrupted hole edges at 90°. Blades 1 cutting edge for small models 2-18. All the other models have 2 cutting edges. The inner HSS blades are sharpened with cutting angles of: 0° - 14° - 20° and ...
KOPAL CAROSSINO
Diameter: 3 mm - 41 mm
Chamfers in a deep counterbore or along a surface all cylindrical, polygonal, or interrupted holes at 90°.
KOPAL CAROSSINO
Diameter: 2 mm - 117 mm
... The outer HSS blades are sharpened with cutting angles of : 0° - 14° - 20° and 25°, to be specied on ordering. Chamfers all tube ends and cylindrical or polygonal bar ends ...
KOPAL CAROSSINO
Drill diameter: 52 mm
Rotational speed: 200 rpm - 400 rpm
... The ideal pneumatic magnetic core drill for drilling up to 52 mm in all magnetic surfaces, with extended stroke. Energy source: Pneumatic Operating pressure: 6 bar Drilling capacity: up to dia. 52 mm Stroke: 260 mm ATEX: II2GExhIIBT6Gb ...
Drill diameter: 52 mm
Rotational speed: 400 rpm
... The ideal pneumatic magnetic core drill for drilling up to 52 mm in all magnetic surfaces. Operating pressure: 6 bar Drilling capacity: up to dia. 52 mm Stroke: 130 mm ATEX: II2GExhIIBT6Gb ...
Drill diameter: 12 mm - 100 mm
Rotational speed: 40 rpm - 250 rpm
... The powerful hydraulic magnetic core drill for drilling up to dia. 100 mm as well for underwater operation. Energy source: Pneumatic Operating pressure: 140-180 bar Drill bits: up to dia. 100 mm Magnetic force: 850 kg Underwater operation ATEX: ...
... V70eco mounting blocks are a further development of the established V70 product line, optimized in quality and price. They are fully compatible with the existing V70 T-slot System. Material Tool steel, high-strength ...
HALDER France
... Material Grey cast iron, phosphatized Notes RoHS compliant REACH compliant Free of conflict minerals ...
HALDER France
... Material Aluminium Notes Special types on request. ...
HALDER France
Maximum cutting height: 16, 21, 26 cm
Minimum cutting height: 8, 10, 12 cm
Laser power: 550 W
... Modern and versatile cutting machine designed for cutting light and medium heavy fabrics.
Basic equipment for every cutting room – this versatile cutting machine is suitable for all types of materials.
PRODUCT BENEFITS
- Enough
SAMEX
Circular saw blade diameter: 100 mm
Bore: 23 mm
... Overview
Circular blades for KM RS-100 and Fast Ocean RSD-100 disc cutting machines.
Technical specifications (table)
Material: HSS
Outer diameter: 100 mm
Bore diameter: 23 mm
Type: round or polygonal
Available ...
SAMEX
... The table for cutting aluminum or PVC tubes and profiles facilitates precise cutting using a manual gauge.
PRODUCT BENEFITS
- Customizable table sizes tailored precisely to your specific production requirements
- Centralized
SAMEX
... UNIVERSAL SCREW CAPS FOR USUAL SCREW HEAD Material: LDPE Colour : Black, White, Grey - Other colour on request Dimensions : mm Screw caps CV are intended to protect and cover usual screw head ...
PLASTEM
... SCREW CAPS WITH RING Material: LDPE Colour : Black, White, Grey - Other colour on request Dimensions : mm Screw caps with ring - Accept a range of screw and rivet sizes, reducing stock requirements - The integral washer reduces fitting time - Provide ...
PLASTEM
... SCREW CAPS FOR RIVET Material: LDPE Colour : Black, White, Grey - Other colour on request Dimensions : mm Screw caps CVR are intended to protect and cover rivets ...
PLASTEM
Tube diameter: 12 mm - 120 mm
... Overview
Compact fiber laser machine for automatic cutting of tubes and metal profiles. Designed for precise, repeatable and fully automatic processing with configurable loading and unloading systems for integration into industrial production ...
... Description
The AUBH vibrating hopper bottoms by Tec.s.i.m. are inverted‑cone devices available in a wide range, designed to facilitate discharge of bulk materials from silos and hoppers by means of vibration. They are composed of a cone in ...
... The DKNC rotary extractor is a compact machine designed to ensure uniform distribution of product to outlets while minimizing dust losses and the risk of food contamination.
Key functional features
- Fully sealed construction to
... Technical parameters Measuring range: oil content within the scope of 0.5%-60% of good, feed, oil and other fat products. Measuring sample quantity: 6 simultaneously. Heating time: within 10 min. Recovery system: automatic. Recovery rate: ≥80%. Temperature ...
... Specifications Precision manual cutter SUNY-ZCB400 1. For fast PCB producing. 2. High quality. 3. Factory price. Precision manual cutter SUNY-ZCB400 1. Product usage: fast cutting of copper clad; 2. Cutting materials: suit fast cutting of ...
... This notching system is made to measure for die cutting operations on flexible or rigid profiles. The system is able to execute cutting operations on profiles of different shapes, made of different materials (rubber, PVC, TPE,…), with or without reinforcement. How ...
TECNOFIVE S.r.l.
... Manual die cutting system This notching system is made to measure for die cutting operations on flexible or rigid profiles. The system is able to execute cutting operations on profiles of different shapes, made of different materials (rubber, PVC, TPE,…), ...
TECNOFIVE S.r.l.
This type of semi-automatic system has been specially designed to execute cutting to size and die cutting operations on rigid profiles. The system is able to execute cuts on profiles of different shapes made of different materials (rubber, PVC, TPE,…) ...
TECNOFIVE S.r.l.
... ● Provide with the rocker arm , enable to revolve on 360 degrees. ● Main shaft can be extended to maximum 830mm ● Power arm inside includes nitrogen gas stick , allow user to grab the arm easily, automatic lift up to position after finishing the work ...
Anlidar Industrial - MyTorq
... KP-AUXA, KP-AUX1T ●Provide with the rocker arm , enable to revolve on 360 degrees. ●Main shaft can be extended to maximum 830mm ●Power arm inside includes nitrogen gas stick , allow user to grab the arm easily, automatic lift up to position after ...
Anlidar Industrial - MyTorq
Power: 5 W
... Light source: COB LED Li-battery Autonomy: 2.5 hours (4 hours in economy mode) Charging time: 3.5 hours Soft Touch handle Protected switch Electronic load control: the hand lamp can be left permanently on the charger. Indicator light on the lamp: - ...
CABLE EQUIPEMENTS
Length: 40, 60, 80, 120, 150 m
Cable diameter: 9 mm
... Fiberglass pulling rods are the most efficient way to pull cables, or ropes, into underground conduit. The fiberglass of our SUNNY® range is of high quality. Its high resistance to pushing and pulling allows it to slip into all ducts. End caps firmly ...
CABLE EQUIPEMENTS
Length: 40, 60, 80, 100, 120 m
Cable diameter: 7.2 mm
... Fiberglass pulling rods are the most efficient way to pull cables, or ropes, into underground conduit. The fiberglass of our SUNNY® range is of high quality. Its high resistance to pushing and pulling allows it to slip into all ducts. End caps firmly ...
CABLE EQUIPEMENTS
Working length: 360, 250, 270 mm
... Ideal for cutting underground cables, wires, and steel ropes during mine equipment installation, maintenance, and dismantling. Features Tungsten steel cutting port, wear-resistant and durable One-piece high-pressure body, strong and reliable Spring-cushioned ...
Rosit GmbH
Working length: 360, 270, 250 mm
... Ideal for cutting underground cables, wires, and steel ropes during mine equipment installation, maintenance, and dismantling. Features Tungsten steel cutting port, wear-resistant and durable One-piece high-pressure body, strong and reliable Spring-cushioned ...
Rosit GmbH
Working length: 360, 270, 250 mm
... Ideal for cutting underground cables, wires, and steel ropes during mine equipment installation, maintenance, and dismantling. Features Tungsten steel cutting port, wear-resistant and durable One-piece high-pressure body, strong and reliable Spring-cushioned ...
Rosit GmbH
Multi-angle band saws designed for precise, versatile pipe cutting. They support positive and negative cutting angles from +67.5° to -67.5° and deliver more uniform cuts using an electric cylinder instead of hydraulic actuation. Intended for pipe manufacturers, ...
Hebei Mingmai Technology Co., Ltd.
Diameter: 40 mm - 110 mm
Length: 500 mm
... This chamfering pipe cutter is a handheld pipe cutter that performs chamfering during cutting, enabling single-step preparation of pipe ends for welding or fittings.
Key features / Uses
- Simultaneous cutting and chamfering to reduce
Hebei Mingmai Technology Co., Ltd.
... The Pipe Electrofusion Turbo Scraper is a drill-mounted rotary tool designed to remove the oxidation layer from plastic pipe ends for electrofusion, socket fusion and general pipe connection applications covering diameters from 20 to 63 mm.
Key ...
Hebei Mingmai Technology Co., Ltd.
Drill diameter: 10 mm - 76 mm
... DF 320 - Drlling range 20 - 76 mm / 1" - 3" • - For wet and dry drilling • - High motor performance 1350 W - 50 Hz with double insulation • - Variable speed control switch, can operate with soft start • - Motor overload circuit protection • - Clutch ...
Drill diameter: 25 mm - 406 mm
... • Powerful motor, big gear case system for professional drilling use • Two speed function • Compact design and low weight for easy handling • High motor performance 50 Hz with double insulation and overload circuit protectIon • Clutch system built ...
... - 94 Lumens - 2 AAA batteries - Momentaneous / Continuous Activation Rear Switch - Security certified, ATEX ZONE 1 (Category 2) - Fine design and robust helmet holder (sold separately) - 94 Lumens Check your environment without congestion in the ...
A2S Advanced Safety Solutions
The VB3 ™ 2220Z1 torch is certified for the ATEX Zone 1 explosive atmospheres (category 2), ideal for professionals working in high-risk explosion areas. Equipped with two LEDs, it offers long-lasting proximity lighting with more than 34 hours of autonomy ...
A2S Advanced Safety Solutions
The LED 2755Z0 front lamp is specially designed for explosive environments, certified ATEX Zone 0 (Category 1), ultra compact and light in ABS and polish-proof polycarbonate. With an ultra powerful LED producing up to 72 lumens and a battery life of up ...
A2S Advanced Safety Solutions
... To fix aluminum profiles or other profiles securely on the floor Material: zinc-plated steel Color: galvanized Packaging Unit: 1 pc. Extras: Available for left and right mounting ...
For holding drilling machines and the like. Easy mounting with all profiles. Heat resistant up to 180°C.Material: PAColor: BlackPackaging Unit: 1 piece
... To fix aluminum profiles or other profiles securely on the floor Material: zinc-plated steel Color: galvanized Packaging Unit: 1 pc. Extras: Available for right mounting ...
... Mechanical Nut Breaker PS-HRQ-36 Performance and characteristics - The machine adopts mechanical principle. High efficiency. Fast speed. - Can be easily excised nut transmission pole tower or petrochemical industry corrosion. - The cutting edge is made ...
Paprsky Energy
... SPLIT TYPE CORROSION NUT RESECTION Performance and characteristics - Application to transmission and distribution equipment such as tower. Removal of rust nut or anti-theft nut. Model: PS-SCR-1 - Maximum breaking force: 130 KN - Maximum stroke: 20mm - ...
Paprsky Energy
... Integral Nut Crusher Model: PS-NC-1, PS-NC-2 - Maximum Breaking Force: 12T (PS-NC-1), 10T (PS-NC-2) - Maximum Stroke: 18mm - Broken Nut Size: M12-M24 (PS-NC-1), M18-M24 (PS-NC-2) - Weight: 4kg (PS-NC-1), 3.3kg (PS-NC-2) Availability: Usually ships ...
Paprsky Energy
... ELECTRIC EYELETING MACHINE WITH 2 HEADS AND PEDAL - FOR INTENSIVE FOOD USE Professional electric eyelet machine with double head, designed for the simultaneous application of two eyelets on food bags (pasta, biscuits, flour and other products). Built ...
Ferplast
... 1 HEAD ELECTRIC EYELETING MACHINE WITH PEDAL - precise, reliable and silent Professional electric eyelet machine with one head, designed to apply 9 mm eyelets (with "Guarantee" written on them) on food bags such as pasta, biscuits, flour, etc. Extremely ...
Ferplast
... LEVER OPERATED YELETTING MACHINE, WITH SINGLE HEAD, automatic feeder, cast-iron frame, without stand. Suitable for smaller volume applications and where one eyelet are required. Ideal for automatic application of warranty seals in cardboard industry, ...
Ferplast
... 2 SIDES Coated on 2 sides. Medium grit. Total length 148 mm. Available in shapes: Square Diamond Triangular Round Oval 3 square ...
Bipol
... DIAMOND Mini conical diamond hand files. Available in square or round shapes and in assortments. Grits 200-400-600 ...
Bipol
... ON 1 SIDE Riffler available in various shapes: Flat Square Cylinder universal Round ...
Bipol
... KAINDL WOOD-Plane - Milling disc for wood 115 x 20 x 22,2mm Developped for professional works in craft, creative- and carving work areas. Enables quick and clean surface removal on all soft- and hardwood. This makes it applicable in various ...
KAINDL REILING
The Super-Carver with its round carbide cutting edge works in horizontal as well as in vertical direction. Due to the chip thickness limiter and precisely processed disc body, the carver is controlled easily without kickback whilest having a high removal ...
KAINDL REILING
... Kaindl Multi-Carver Cutter head with exchangeable carbide inserts The Multi-Carver works in horzontal and also in vertical direction. The Multi-Carver is very good controllable, due to the special cutting geometry, by a high cutting performance. For ...
KAINDL REILING
... The MAUCOTOOLS Facing Kit FK for Portable Line Boring Machines is a combination of power and versatility for FLANGE FACING, creation of SEEGER-CIRCLIPS GROOVES and EXTERNAL MACHINING (External cylindrical turning) of PINS and AXLES. The FK Series in ...
MAUCOTOOLS SRL
Externally mounted SFM-26 is a split frame, clamshell type light and portable design. A rugged and slim machine suitable for tubes and pipes in the size range of 50.8 mm to 152.4 mm (2" - 6") in external diameter. It is a new generation heavy duty facing, ...
MAUCOTOOLS SRL
Externally mounted SFM-612 is a split frame, clamshell type light and portable design. A rugged and slim machine suitable for tubes and pipes in the size range of 152.4 mm to 304.8 mm (6" - 12") in external diameter. It is a new generation heavy duty ...
MAUCOTOOLS SRL
Power: 10 W
The new ATEX LED hand lamp KE-LED-EX 5018, with 360° illumination, is ideal for all-round illumination when working in explosion-proof areas, such as cleaning work in tanks or silos. The integrated diffuser foil ensures a glare-free and homogeneous light. ...
KIRA Leuchten GmbH
Power: 10 W
The new ATEX LED tube light KE-LED-EX 5018, with 360° illumination, is ideal for all-round illumination when working in explosion-proof areas. Thanks to the optionally available accessories, the 360° light is suitable for permanent or temporary installation. ...
KIRA Leuchten GmbH
Power: 3 W
The extremely compact, light and explosion-proof ATEX hand lamp is ideal for illuminating areas that are difficult to access and where inspection and service are necessary. At the same time it fulfills the safety requirements with regard to explosion ...
KIRA Leuchten GmbH