Rotational speed: 90 rpm - 250 rpm
Torque: 90 Nm - 240 Nm
Lever start - Button reverse -B18 output Output spindle tapper B18 din Type of tool Stand mounted Operation Button reverse Net weight 3.1 kg Length 332 mm Actual air consumption 15.6 l/s Air inlet thread size 0.25 ...
Desoutter Industrial Tools
Compact and Lightweight The M3612DA cordless router is designed for smooth groove cutting, window cutting, shaping and more, providing easy maneuverability with its compact size and light weight. Faster than a Corded Router With ...
HITACHI KOKI
Ideal for cars, SUVs and commercial vehicles. Features • Maximum thrust: 2 tons (10 bars) - 1.6 tons (8 bars) - 1.2 tons (6 bars) • Spring compression stroke: 335 mm • Upper universal hold system that allows all left/right-hand spring ...
Made in Germany – STAHLWILLE double open-end spanner set in sturdy roll-up case, 7 pcs.-piece, Imperial spanner sizes 1/4"-5/16" chrome-alloy steel, chrome-plated, jaw 15° angle, DIN 3113 Form A, chrome alloy steel, chrome-plated, ...
STAHLWILLE EDUARD WILLE GmbH & Co. KG
Rotational speed: 2,200 rpm - 7,600 rpm
Disc diameter: 3 in
VERSATILE: Equipped with a 2-speed gearbox, you have full control over the speed settings, so every job can be done the way you want. INCREASED PRECISION: Thanks to its side handle and ergonomic design, the 12V sander and polisher ...
Ingersoll Rand
Rotational speed: 175 rpm - 2,400 rpm
The 2200 Series are lead screw tappers that are engineered for accurate hole tapping in medium to high-production machining operations. They are air-run and completely automatic and have built-in, pressure-operated valves, manual regulators ...
Ingersoll Rand
Tapping capacity: 3 mm
Rotational speed: 475 rpm
With high levels of power, the 7 Series Tapper can perform quickly and can get any job done with ease. Performance The 7 Series Tapper is equipped with a variable throttle for maximum control and minimum tap breakage. User ...
Ingersoll Rand
The Simultorc™ bolting process utilizes multiple HYTORC tools simultaneously on your bolting application. With reduced time during assembly and disassembly, Simultorc allows for fewer passes to complete the job, making the bolt load on ...
What is a backup wrench? During tool operation, a backup wrench gets placed on a passive, non-torquing nut. A backup wrench will prevent the rotation of the passive nut when the active nut is tightening. There is no need to hold the ...
Woodhead Strain-Relief Grips reduce stress and wrap securely around cables without damaging them Offered in various thread sizes 1/2” NPT through 2-1/2” NPT Wide diameter range and general-purpose character Accommodates many applications, ...
Molex
Ultra-powerful with 1100 lumens in BOOST mode, the DUO S is the most powerful rechargeable headlamp in the Petzl line. It is multi-beam, and has five lighting modes, making it adaptable to every situation: close-range work, proximity, ...
PETZL SECURITE
Clinching uses cold forming to produce two-layer or multilayer joints of metal sheets and/or profiles, similar to snap fasteners. By means of RIVCLINCH® joining technology, steel and stainless steel materials as well as aluminium and ...
The PASS series features powerful, portable tools and a hydraulic drive with compressed air booster. The all-purpose C-frame working head family is fitted with the superb PASS option (passive forward stroke system). The forward stroke ...
RIVSET® self-pierce riveting systems The product range for RIVSET® self-pierce riveting systems includes manual systems as well as systems for fully automatic production. They are designed for a wide variety of applications and can be ...
Energy-saving, bright LED technology Approved in accordance with the relevant firefighting standard Lamp head pivots 190° Incredibly lightweight Main light continuously dimmable Long battery life Ergonomic one-hand operation Functional ...
The ultra-compact laminate trimmer, enabling effortless one-handed control Fast and clean trimming Unobstructed view of the cutting area Effortless one-handed operation The GLF 55-6 features a 550 W motor spinning ...
Bosch Production Tools
Hand lamp equipped with a dimmer. Rechargeable via USB cable provided. Product highlight - Economical Specifications: - ultra thin head: 23x14mm - COB LED lighting - power: 10-600lm - 6500 Kelvin - dimmer (adjustable knob) - ...
Tube diameter: 19 mm - 85 mm
This tool is made to cut several types of pipes: steel, copper, PVC, aluminum and stainless steel pipes. The pipe cutter is made up of a 330mm-long chain and can be used to cut an exhaust pipe without dismantling it. It is simple ...
TOOL FOR REMOVING DOOR STAPLES Warranty period - 2 years Tariff code - Tariff Normal (TN) Warranty Procedure - EASY
Drill diameter: 30 mm - 35 mm
Rotational speed: 320 rpm
THE SMALL MACHINE WITH HUGE POWER, NOW WITH LED SPOTLIGHT! Horizontal magnetic core drilling machine with an angular gearbox. Ideal for drilling in extremely confined spaces. New! Integrated LED Spot Lightfor more visibility and ...
BDS Maschinen GmbH - Germany
A complete kit of four extractors especially designed for use with braided packings, which simplify and speed up the extraction of the rings to be replaced. The kit has the following diameters: 4, 6, 8, 10.
Tool designed to cut braided packings at 45° angles. The diagonal cuts are carried out with the help of a guide, so that each ring is identical to the other. This device allows all ring seals to be cut directly from the reel without off-cuts ...
The Texpack® gasket cutter is a device for producing gaskets with diameters ranging from 40 mm to 210 mm. Circular gaskets can be produced exactly to size. Any gasket material can be cut: asbestos-free, graphite, rubber, PTFE, PVC, carbon ...
The TTNG323 is a machine for the orbital cutting of pipes and pipelines, especially those of great thickness and whatever the material considered. This solution is used for cutting, beveling, straightening and loosening and carries out ...
PROTEM
The MS Series by Protem is a Flange facing tool which comes with a large male and female face flanges. For this specific unit it has different total working range. For those having a guiding, it has 1400 to 2300 mm. For those without ...
PROTEM
The machining Unit for machines TTS-ROD makes it possible to machine the welds of Socket Welding (SW) type pipe fittings as part of such maintenance or repair work. For machining operations, the TTS-ROD mobile machining units are equipped ...
PROTEM
Toe clamps for T-slots Material: Steel. Version: Body tempered and black oxidised. Square washer case hardened and brass-plated. Note: These toe clamps can be used on machine tables or adapter plates. The positive down force holds ...
norelem - Éléments standard mécaniques
Drill bushes cylindrical DIN 179 Material: Special low carbon steel Version: Hardened to 740 ±80 HV 10 and ground. Note: From diameter D1 over 15 mm size increases are 0.5 mm. Drawing reference: Form A: hole rounded one end Form B: ...
norelem - Éléments standard mécaniques
Split pins heavy version ISO 8752 Material: Spring steel or stainless steel 1.4310. Version: Bright. Note: The nominal diameter of the pin is the same as the hole diameter. The recommended tolerance of the hole is ISO H12. Due to ...
norelem - Éléments standard mécaniques
American Pattern Tin Snips • For straight cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
NWS Germany Produktion W. Nöthen e.K.
Extension Bar 1000V • With retainer to prevent unintentional loosening of the ratchets and/or operating tools • Multi-layered insulation according to DIN EN/IEC 60900 • Base tool chromium-plated • Made of chrome vanadium steel, forged, ...
NWS Germany Produktion W. Nöthen e.K.
T-Handle 1000V • With retainer to prevent unintentional loosening of the ratchets and/or operating tools • Multi-layered insulation according to DIN EN/IEC 60900 • Base tool chromium-plated • Made of chrome vanadium steel, forged, oil-hardened
NWS Germany Produktion W. Nöthen e.K.
● Provide with the rocker arm , enable to revolve on 360 degrees. ● Main shaft can be extended to maximum 830mm ● Power arm inside includes nitrogen gas stick , allow user to grab the arm easily, automatic lift up to position after ...
Anlidar Industrial - MyTorq
KP-AUXA, KP-AUX1T ●Provide with the rocker arm , enable to revolve on 360 degrees. ●Main shaft can be extended to maximum 830mm ●Power arm inside includes nitrogen gas stick , allow user to grab the arm easily, automatic lift up to ...
Anlidar Industrial - MyTorq
With the height-adjustable monitor floor stand, RK Rose+Krieger is expanding its "RK monitor holder" product range to include a robust, ergonomic standing workstation for industry. The work surface and monitor mounting are supported by ...
- Stable high-power motor and robust metal housing - Can be controlled from hand-held unit through optional manual shut-off - Simple, intuitive operation - With soft start and active brake - The mapping of the grinding processes or ...
The VKS 125 is an expert for a special task – the device is cutting cable ducts with millimeter precision and without burrs. The centre piece is a blade made of hardened tool steel, cutting cable ducts and covers up to 125 millimeters ...
ALFRA GmbH
Infinitely variable from 0 to 90? No problem for our variable welding angle TMA 600. Compact, flexible and powerful – with a dead weight of only 2.7 kg, the device is mastering all tasks involving the alignment of heavy workpieces ...
ALFRA GmbH
Pressing force: 75 kN
concentrated punching force – the basis model of the Alfra hydraulic-puncher-line is an invaluable help for control cabinet manufacturers. Especially if they have to handle a large amount of punch-outs or exceptional material thicknesses. Due ...
ALFRA GmbH
Storage space for 10 tools : 5 screwdrivers + 5 pliers Storage space for a pair of gloves Large elastic strap to maintain the tools Inner protective flap Sturdy carry handle Zip fastener.
PENTA ESP
Electrical meter replacement tool set - Essential kit The essential kit contains the necessary tools for electrical meter replacement. The kit is delivered in a sturdy trolley bag for more convenience. You can complete this kit ...
PENTA ESP
Diameter: 16 mm - 58 mm
Multifunction tools for sheath, peelable semiconductor with chamfer and insulation Standards Compatible with C33-226, UTE C33-223, NF C 33-223, HN33S23 Use MF3/40-C and MF3/60-C are adjustable multifunction tools that allow : - ...
PENTA ESP
GF Saw - Cutting and Bevelling Machines This saw has been designed for precise cutting of tubes and pipes in just seconds. For more than 40 years construction companies rely on the standard set by Orbitalum in the indus-trial prefabrication ...
Orbitalum Tools
GFX 3.0 - Pipe Cutting & Beveling Machine Our GFX series is the ideal solution for cutting of thin-walled tubes. The rugged design for a long product life makes the saws especially economical. Furthermore, the long tool lives thereby ...
Orbitalum Tools
GF 6 (AVM/MVM) - Rohrtrenn- & Anfasmaschine From the chemical, biotechnology, pharmaceutical, food and beverage industry to the energy plant construction and shipbuilding. The GF series sets new standards in orbital pipe machining. ...
Orbitalum Tools
• Pocket calipers DUO-FIX • External micrometer with carbide measuring faces, measuring range 0-25 mm, reading 0.01 mm • Flexible steel rule, stainless steel, measuring range 200 mm, graduation mm / mm, 13 x 0.5 mm • Knife square, ...
HELIOS-PREISSER
Please specify:
Help us improve:
remaining