- Packaging - Logistics - Handling >
- Handling and Lifting >
- Other handling and lifting equipment
Other handling and lifting equipment
Lifting capacity: 1 t - 6.3 t
... Hand-operated trolley in combination with the REMA Select 200OD hand chain hoist. Only available in combination with the REMA Select 200 OD manual chain hoist. Properties •Extremely low building height (135-235 mm). •Suitable for beams with both ...
REMA Hollande B.V.
Lifting capacity: 500 kg - 5,000 kg
... Properties •Adjustable flange by adding or removing rings. •Suitable for various profiles, with flat or bevel flange. •Equipped with solid steel machined wheels. •Bearing by maintenance-free ball bearings. •Wheel rupture supports and tilt protection ...
REMA Hollande B.V.
Lifting capacity: 1,000, 500 kg
... Properties •Adjustable flange by adding or removing rings. •Equipped with solid stainless steel wheels. •Wheel rupture supports and tilt protection provide extra safety. •Stainless steel AISI-304. •Material: AISI-304 •Marking: According to ...
REMA Hollande B.V.
Tensile strength: 142 daN - 5,270 daN
... SOFT WIRE ROPE 7X7 - STAINLESS STEEL A4 Model : 431900 ...
Working height: 0 m - 12 m
Load: 0 kg - 200 kg
... Product Overview
The Articulating Boom Manlift from YG Machinery is an articulated aerial work platform (also referred to as a z boom or knuckle boom lift) designed to provide exceptional obstacle clearance and flexible multi-angle positioning ...
Zhengzhou Yugong Construction Machinery Co., Ltd.
Working height: 5.8 m - 13.7 m
Load: 230 kg - 450 kg
... Overview
The YG Machinery mobile hydraulic scissor lift series is an aerial work platform designed for construction, facility maintenance and industrial material handling. Models offer compact footprints for confined spaces, robust manganese-steel ...
Zhengzhou Yugong Construction Machinery Co., Ltd.
Working height: 5.8 m - 13.7 m
Load: 230 kg - 450 kg
... Overview
20 ft (approx. 6 m) scissor lifts are used for a wide range of construction, maintenance and installation tasks. Typical units deliver a maximum working height of about 26–27 ft (≈8 m) and platform loads from 230 kg up to 500 kg depending ...
Zhengzhou Yugong Construction Machinery Co., Ltd.
fiberglass industrial ropeDiameters from 1/4″ (6 mm) to 2″ (50 mm)
Diameter: 6 mm - 50 mm
... Silicone rubber coated fiberglass rope is often used as a high temperature gasket in boiler applications, as the rope provides a heat resistant steam and gas tight seal. Suitable for liquid, steam and gas sealing. The rope may be totally covered, or ...
Ningguo BST Thermal Products Co.,Ltd
Diameter: 5 mm - 25 mm
Texturized fiberglass twisted rope is a non-asbestos product used in low pressure in ingot moulds, pipe insulation,thermal shields. It is made of high quality texturized fiberglass yarns by twisting process(one-strand twisting or multi-strand twisting), ...
Ningguo BST Thermal Products Co.,Ltd
Diameter: 5 mm - 50 mm
This Texturized fiberglass braided square rope is fabricated with high quality texturized fiberglass yarns that will not burn and will withstand continuous exposure to temperatures of 1000°F / 520°C. This material resists most acids and alkalis and is ...
Ningguo BST Thermal Products Co.,Ltd
... Union mezzanine racking designed can be designed for up to 3 floors supported by racking to improve the space of your warehouse. The mezzanine design can be customized according to your specifications including the size, load capacity, and color. ADVANTAGES 01 ...
... Union mezzanine racking designed can be designed for up to 3 floors supported by racking to improve the space of your warehouse. The mezzanine design can be customized according to your specifications including the size, load capacity, and color. ADVANTAGES 01 ...
... It is designed for evenly discharging bulk materials from concrete bi ns, semi-dry bins or plastic bins, and thus to assure fully discharge and no spontaneous classification no matter it is a round, square or rectangular-sectioned bin. It is applicable ...
Load limit: 400 kg
Worker's safety during lifting operations is guaranteed by using baskets for aerial maintenance. They comply with all current regulations and ensure the necessary balance the worker needs to be free to move without any risk of fall. Basket for aerial ...
BUTTI
Available in different capacities, with a steel or wooden top.
BUTTI
... Standard “Big Works” stand, LOAD CAPACITY 1000 kg. Being mindful of all stages of the work on site and having in mind the goal of making the most practical use of the work equipment, we design heavy stands for the support of various items. The special ...
BUTTI
Load limit: 250 kg
... Overview
This gas bottle lifter and rotator is a counterbalance model designed for use in narrow workspaces. The design removes the need for outlying legs in front of the machine so operators can place cylinders in otherwise difficult-to-access ...
Overview In industrial storage and processing, controlled and reliable discharge from silos is essential to integrate bulk powders and granules into production lines without interruptions. Silo discharge systems provide engineered solutions to ...
... ● Provide with the rocker arm , enable to revolve on 360 degrees. ● Main shaft can be extended to maximum 830mm ● Power arm inside includes nitrogen gas stick , allow user to grab the arm easily, automatic lift up to position after finishing the work ...
Anlidar Industrial - MyTorq
... KP-AUXA, KP-AUX1T ●Provide with the rocker arm , enable to revolve on 360 degrees. ●Main shaft can be extended to maximum 830mm ●Power arm inside includes nitrogen gas stick , allow user to grab the arm easily, automatic lift up to position after ...
Anlidar Industrial - MyTorq
... ●Relieves effort on operator arm, wrist & shoulders caused by repetitive tasks, vibrations, forces & loads ●High stiffness ●High tensile strength ●High chemical resistance ●High temperature tolerance ●Super lightweight ●Low thermal expansion ...
Anlidar Industrial - MyTorq
... The best compromise between SUSTAINABILITY, SAFETY and MANAGEMENT Cellulose pulp packaging is made from exclusively recycled raw materials (paper, cardboard, and newspaper), with the addition of only eco-friendly additives. The result is a 100% ...
Eredi Caimi S.r.l.
... The best compromise between SUSTAINABILITY, SAFETY and MANAGEMENT Cellulose pulp packaging is made from exclusively recycled raw materials (paper, cardboard, and newspaper), with the addition of only eco-friendly additives. The result is a 100% ...
Eredi Caimi S.r.l.
... EXPANDED POLYETHYLENE L-SHAPED, U-SHAPED, THREE-WAY, MULTISHAPE PROTECTIVE CORNERS EXPANDED POLYETHYLENE COILS, HD COUPLED and adhesive HIGH AND LOW DENSITY POLYETHYLENE COILS HD COUPLED EXPANDED POLYETHYLENE BAGS LOW DENSITY POLYETHYLENE ...
Eredi Caimi S.r.l.
Diameter: 6 mm
... The fibre can be tied onto the ceramic tube before fixing onto the metallic tube prior to sealing with cement. It is made up of long ceramic fibres woven to form a string. The thermal stability of these fibres is fairly good up to 12000C which is sufficient ...
... The handling of heavy loads, such as hanging or lying deli meats, often struggles with limited space and a considerable number of trolleys, frames, trees and racks that are usually not designed and made for automation. Loaders can include the station ...
... The handling of heavy loads, such as hanging or lying deli meats, often struggles with limited space and a considerable number of trolleys, frames, trees and racks that are usually not designed and made for automation. The TFRC load handling system solves ...
Electrolytic Copper Crane is a special crane set for the production process requirements of electric copper. Its main function is to take out the arranged positive and negative plate from span unit, then lift to empty slot and install in electrolytic ...
... Product Feature: 1. Realize long-distance transportation and site transfer, which is convenient and flexible. 2. Realize the integration of ground feeding and high-altitude tile discharge, with high efficiency and energy saving. 3. Direct use of construction ...
... 1. It can mounted on single beam overhead cranes. 2. It is essential in raising working efficiency and improving working conditions. 3. Gantry Cranes, Jib Type CD,Electric hoist as only one normal Speed which can satisfy normal application. 4. It is ...
Lifting capacity: 3.2 t - 50 t
... Product introduction
- Optimized compact structure to maximize available lifting height
- Designed specifically for single-girder crane systems
- Adjustable trolley wheel spacing to fit different crane beam widths
- Integrated
... ORBITAL ATTACHMENT FOR TOOLS ORBITAL ATTACHMENT FOR TOOLS ...
... Masking Strips are used for long and straight holes where paint application is not desired. They are manufactured in custom sizes. They are specially made from PGA silicone for use in processes such as powder coating, cathodic electrophoretic coating ...
In addition to typical lift table applications, Wasser Schnitt is your manufacturer for customised lifting systems and special designs. From material lifting systems for high-rise construction to goods transport or truck lifts, Wasser Schnitt develops ...
Wasser Schnitt, S.L.
Working height: 3,500, 1,000 mm
Load: 3,000, 250 kg
These mobile working platforms can be supplied in track-guided or free-moving versions, depending on your requirements. It is possible to implement automatic rail guidance, induction loop guidance, a belt, or a coding belt, in order to adapt the platforms ...
Wasser Schnitt, S.L.
Our heavy-duty transport vehicles for loads over 10 t are low-slung and have tread wheels with a diameter of 500 mm. They are optionally available with an integrated lifting platform. The lifting platform is designed as a floating platform that is hydraulically ...
Wasser Schnitt, S.L.
Diameter: 9 mm - 32 mm
... NO TWIST A ROPE RELATED PARAMETER - Model: PS-YL9-12'19, PS-Yl11-12'19, PS-YL13·12'19, PS-YL16·12'19, PS-YL18-12'19, PS-YL20-12'19, PS-YL22-12'T25, PS-YL24-12'T25, PS-YL26-12'T25, PS-YL28·12'T29, PS-YL30-12'T29, PS-YL13-18'19, PS-YL16-18'19, PS-YL18-18'19, ...
Pushed/pulled mass: 0 kg - 1,000 kg
Moving speed: 0 km/h - 6 km/h
... ELECTRIC TRAILER FOR BOXES AND TROLLEYS - CAPACITY 1000 Kg. Our electric tow tractor with a capacity of up to 1000 kg is the ideal solution for moving trolleys, boxes and buckets equipped with wheels effortlessly and in total safety. Perfect for industrial ...
Ferplast
Load: 500, 800, 1,000 kg
FPSE wheeled platforms with capacity from 500 to 1000 kg. Wheeled lifting platforms with single and double pantograph, with manual feed and motorized lifting with 12V/75Ah battery. Ideal for effortless handling and lifting of materials and equipment in ...
Ferplast
Working height: 250 mm - 1,295 mm
Load: 100, 250, 350, 450 kg
Wheeled platforms made of AISI 304 stainless steel with hydraulic lifting by pedal and release by lever placed on the rudder. They are available with single or double pantograph and are equipped with two fixed and two pivoting nylon wheels. The frame ...
Ferplast
We make tipper trailers and tipper bodies for trucks. The bodies are build in all varieties of steel. Various tailgate solutions. Small details make the product work. Simplicity in combination with easily available parts. We do not only build the standard ...
We have vehicles with a superstructure as mobile workshop, for the transport of explosives, with crane and flatbed for construction purposes, with winches, with oilfield platforms and further more.
Working height: 14, 16, 18, 20 m
Load: 200 kg - 250 kg
Truck-Mounted Articulated Aerial Platform are a type of crane that has been designed with the purpose of minimizing safety hazards and environmental impacts by lifting loads at a fixed elevation. Telescopic aerial platforms, in particular, are created ...
Load limit: 400 kg
... Do you have very heavy metal boxes to empty and you don’t know how to do it? Here is the solution made just for you: the Rievo branded lifter with custom-made fork for the grip and rotation of the cases: ✅ two grip modes: from the back or top ✅ anti-fall ...
Working height: 0.5 m - 3 m
Load: 500 kg - 1,000 kg
Tesis Engineering designs and manufactures customized work platform lifts, fixed or self-propelled, configured for specific applications and equipped according to the work requirements of its customers.
Working height: 3,000 mm
Load: 300 kg
... TRASLO mobile lifting work platform allows the operator to move easily in 3 directions: vertically, longitudinally and horizontally to reach the most advanced positions. Among the various applications, Tesis Engineering TRASLO mobile access platform ...
Working height: 800 mm
Load: 230 kg
... MICROLEVEL represents the perfect balance between simplicity and efficacy to reach slight landings or misaligned levels up to 800mm where spaces are limited. Fitted with foldable platform and the extremely compact dimensions MICROLEVEL is the ideal ...
... Standard Control Cable, flexible, colored conductors, 0,25mm², shielded, PVC-jacket transparent number of cores: 2, 3, 4, 5, 6, 7, 8, 10, 12, 16, 20, 24, 50 ...
Metrofunk Kabel-Union
... Standard Control Cable, flexible, colored conductors, 0,38mm², shielded, PVC-jacket gray number of cores: 1, 3, 4, 5, 6, 7 ...
Metrofunk Kabel-Union
... Standard Control Cable, flexible, colored conductors, 0,50mm², shielded, PVC-jacket transparent number of cores: 2, 3, 4, 5, 6, 7, 8, 10, 12, 16, 20, 24, 32 ...
Metrofunk Kabel-Union
Subscribe to our newsletter
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group