Other handling and lifting equipment

Working height: 12 m

Compatibility with T35120SL MP Man platform preconfiguration on Bobcat telescopic handlers of 12 m and above Emergency control boxes in the man platform and at the rear of the machine 2 models available Use the man platform ...

Working height: 12 m - 17 m
Lift capacity: 200 kg

Working height: 2,070 mm - 2,635 mm
Lift capacity: 230, 320, 380, 450 kg

Working height: 11 m
Lift capacity: 210 kg

ATLS systems are a solution for the automatic loading of semi-trailers and vehicle containers. PALLET LOADING OF THE CONTAINER Jest is a fixed pallet container loading system, installed in one place of a loading and unloading platform ...

Carrying capacity: 450 kg

The Lean Shelf Wagon is a multipurpose load carrier for both internal and external logistics. Dimensionally optimised for space utilisation and high vehicle fill, the Shelf Wagon is ergonomic to use with its height adjustable shelves. ...

Addressing specific tray-positioning requirements or the unique demands of the loading process, our engineering team has cultivated expertise over several years through collaborative design efforts with clients, developing tailor-made ...

Another highlight in our range is the extremely compact and remote-controlled trolley HY-2. The patented system is fabricated from high strength steel, four times stronger than conventional steel. Thanks to the remote control, the operator ...

The HY-4 carriage is used principally as a long-distance cable crane in the forestry and construction industries. It has four distinguishing guide pulleys to conserve the skyline and for gentler transit over the supports. The load pendulum ...

The latest development is the extremely compact, remote controlled Wyssen slack-pulling carriage. The chassis of the carriage is made of high-tensile steel that is four times stronger than conventional steel. Thanks to the remote control, ...

All accessory products supplied by Plarad meet the strict requirements of the brand with regard to quality, reliability and safety.

All Plarad accessory products strictly comply with the brand's requirements when it comes to the major factors of quality, reliability, and safety.

Through the use of torque reaction arms, the reaction torques applied to the employee by hand-held torque tools are minimized or completely eliminated. This results in reduced operator fatigue and increased productivity. Torque ...

Fully sealed one piece high tensile steel body construction for high strength with guaranteed no leakages. Body Capacity 4m³ Key Benefits - Small, compact and very manoeuvrable, an ideal solution where restricted access is a problem ...

Lifting capacity: 2,000, 500, 1,000 kg

PRODUCT HIGHLIGHTS • Designed for suspension of hoist with suspension hook • Continuous adjustment to any beam flange width • For parallel-flanged beams from 50 to 305 mm with a maximum flange taper of 14 % • Side guards protecting ...

The pallet loading station allows positioning an entire stack of products onto a pallet as one unit behind a production area without pallets. The time saving compared to other palletizing solutions is considerable. The product stack ...

Lateral working pits are workstations located below the workshop level, from which assembly work as well as maintenance and repair work can be carried out on the bottom or at the side of rail-guided vehicles. Ergonomics and flexibility Serveral ...

Power: 1 kW

Electric platform truck The VOLK Electric Platform Truck EFW 0.3 Roadrunner was designed to transport smaller loads weighing up to 300 kg. With its particularly compact dimensions it is ideally suited for use in tight spaces. Its maintenancefree ...

Power: 4 kW

Electric platform truck The VOLK Electric Platform Truck EFW 1.5 K was designed especially for use in narrow spaces. With a turning radius of only 1.750 mm at the outer wheel, it can easily turn even on train platforms. Precision maneuvering ...

Power: 4 kW

Performance Payload Payload on loading area - 6.325 lbs Towing capacity - Maximum towing capacity - 11.000 lbs Drawbar pull - Maximum drawbar pull (5 min rating) 649 lbf Driving speed - without payload ...

* Strong,firm and stable design * The upper and lower clamping with dual cylinder, ensure the accurate position of the material box * There is a pressure relief design, ensure that the PCB board is not pushed the bad * Automatic ...

JÖST charging machines are tough machines that are able to meet the high demands of foundry operation thanks to a mature and sophisticated design. They essentially consist of a hopper, vibrating discharge­ feeder, chassis frame and control ...

Innovation is at the heart of our business. We took the success of the MT10 and MT15 models to create the Addax MTN. We’ve pushed our creativity to the limits, raising our quality standards to an even higher standard. What can you expect ...

MULTIFUNCTION EXTENSIBLE STAND S/R WITH WHEELS SIZE: DEPTH mm 640 EXTENSION (minimum) mm 220 – (maximum) mm 1160 HEIGHT (minimum) mm 940 – (maximum) mm 1580 WEIGHT kg 13

EXTENSIBLE CHEAP MULTIFUNCTION STAND SIZE: DEPTH mm 750 EXTENSION (minimum) mm 270 – (maximum) mm 1520 HEIGHT (minimum) mm 815 – (maximum) mm 1210 WEIGHT kg 29

MULTIFUNCTION EXTENSIBLE STAND (FOR INDUSTRIAL BODY SHOPS) SIZE: DEPTH mm 750 EXTENSION (minimum) mm 280 – (maximum) mm 1530 HEIGHT (minimum) mm 840 – (maximum) mm 1230 WEIGHT kg 35

The HOPPECKE battery change attachments trak | Xchange PU are suitable for all industrial truck motive power batteries from 24V to 80V. They have been specially developed for electric pallet trucks and low-lift order pickers with lateral ...

The HOPPECKE battery changing trolleys trak | Xchange MU are suitable for all industrial truck motive power batteries from 24V to 80V. They have been specially developed for electric pallet trucks and low-lift order pickers with lateral ...

Motor power: 55 ch

This is an indispensable tool for anyone who does not want to put up with the most difficult environmental conditions. SHERP N is designed for people whose job is to overcome a variety of difficulties on the way, i.e. rescuers, geologists, ...

Motor power: 41 kW

DRIVES EVERYWHERE Grass, gravel, sand, peat, moor, marsh, dunes, rocks, scree, snow, ice FLOATS EVERYWHERE Pounds, lakes, rivers, sandbanks, shores, coasts, and frozen waters CLIMBS EVERYWHERE The only vehicle to climb from ...

Motor power: 55 ch

ALL-TERRAIN SEARCH & RESCUE OPERATIONS Rescues people despite the most harsh terrains: dense forests, fallen trees, shaky grounds, gravel, peat, moor, marsh, dunes, swamps, baulders, scree, snow, ice. WATER RESCUE MISSIONS Floats ...

The fully servo driven multilane slice spreader PSP is suitable to evenly deposit on the flat slices of bread to be thereafter transferred onto the re baking oven wire mesh for the production of toasted bread and mini toasts. The PSP ...

Load limit: 0 kg - 150 kg

TETRIS 100 working platform is made of epoxy-coated steel. Thanks to its independently adjustable feet, its 90 x 50 cm platform and its steel bucket-holder, it provides interior decorators with all the comfort they need. Completely foldable, ...

Load limit: 0 kg - 150 kg

HELIS working platform is made of epoxy-coated steel. With two feet independently adjustable over 1 metre, it can be used on spiral staircases. Thanks to its 90 x 50 cm platform and its steel bucket-holder, it provides interior decorators ...

Load limit: 0 kg - 150 kg

This aluminium gangway is designed for industrial maintenance professionals. Available with 5 to 8 steps and a 0.82 x 0.58 metre platform with a maximum height of 3.78 metres, it constitutes a perfectly safe support for work at heights. ...

The platform is compact stable and safe with guardrail and ladder. Made of 304# stainless steel or painted steel. Dimension:1900 (L) ×1900 (W) ×1800-2000 (H) mm. Customizable