- Industrial machines and equipment >
- Heat Exchanger and Refrigeration >
- Other heating and cooling equipment
Other heating and cooling equipment
Example of Type WOT Heating using a moisture resistant PTFE insulated heat conductor surrounded by nickel-plated copper wire braiding which serves as protective conductor. Description of depicted heating jacket: Outer cover made of ...
Veto Cont – biomass heating containers (60-2000 kW) The Veto Cont – biomass heating containers, which have been completely built and fitted at the factory, can start operating quickly. You only need to connect the heating channels and ...
Power: 5, 3, 6 kW
• Wide range of shapes and power available • Always in stock (subject to prior sale)
The Perun is a multi-functional illumination tool powered by a 3500mAh 18650 battery with a maximum output of 2,000 lumens. This compact, hands-free right-angle light boasts the third generation MCC which holds 1.5A current. When the ...
Heating jackets consist of textile materials which cling closely to the object being heated. To ensure a long service life, only high-grade materials are used. The selection of the material to be used depends on the conditions of usage. ...
Flexible heating mats and provide optimum heat transfer with good heat distribution. Heating mats are the ideal solution for simple level surfaces. -Valves, pumps -Pipelines -Steel pipe frames in particle accelerators ...
Steam production: 60 kg/h - 5,000 kg/h
Pressure: 2 bar - 3 bar
3rd Generation Pure Steam Units with Pure Steam of WFI quality The units have a number of design features to achieve an optimised function and a safe Pure Steam quality, condensed as per the latest editions of USP and EP for Water ...
Capacity: 5,000 m³
FAT MELTING STAINLESS STEEL TANK Specifications An ideal ratio between the height and the diameter to ensure the best heat exchange Single or Double jacketed steel or stainless steel walls. (304L or 316L Stainless steel) Capacity ...
Several options : . heating/cooling . interchangeable agitation parts . emptying device adapted to the product . traverse motion device . control panel box Design, manufacturing and tests effectuated in our workshops.
Power: 4 kW - 60 kW
Temperature: 0 °C - 1,100 °C
Pressure: 0 bar - 1.5 bar
The Kanthal® Flow Heater delivers the highest outlet temperature on the market -- up to 1100°C (2012°F), temperature accuracy within ±1°C and net efficiency of up to 95%. The full range is available with 3.5 kW, 11 kW, 20 kW, 30 kW, ...
Power: 2,675 kW - 6,139 kW
Steam production: 3,500 kg/h - 8,000 kg/h
SteamPack boilers are three-pass design and incorporate a water tube flue gas reversal chamber. This unique Babcock Wanson technology provides operational flexibility and thus unrivalled long-term efficiency and reliability. Environmentally ...
Babcock Wanson
Power: 100 kW - 5,000 kW
Temperature: 300 °C
Pressure: 10 bar - 13 bar
Alfa Laval Aalborg is the world's market leader in supplying marine thermal fluid systems. Aalborg EX is a forced-circulation vertical heater for recovering heat from exhaust gas. In addition to engineering and production of the thermal ...
The DHW cylinder Vitocell 300-V meets the highest demands in terms of hygiene and convenience. Cylinder capacity: 160 to 500 litres. Corrosion-resistant stainless steel cylinder Low heat losses High DHW convenience Corrosion-resistant ...
Viessmann Werke GmbH & Co KG
Heat recovery provides such effective opportunities for energy savings that ASHRAE Standard 90.1 requires heat recovery be used for service hot water heating and reheat in many buildings. Daikin offers two heat recovery type centrifugal ...
Daikin Applied
• Compact (only 7” X 3.63” X 3.95”) • Mounts and operates in any orientation: horizontal, vertical, etc. • Low vibration and noise • No moving parts except fan • Environmentally safe • No compressor, fluorocarbons or filters • Heat ...
TECA (ThermoElectric Cooling America)
Our EDH-Series Electrical Oil Pre-Heater Heating capacity up to 90 kW Thermostat: Adjustable 0-90°C (except EDH-500) Temperature limiter: 100°C fixed (except EDH-500) Max. operating pressure 16 bar Surface loading 2W/cm² Voltage: ...
The Meech Stainless Steel Vortex Tubes are known for being able to convert compressed air into two airflows (a hot, and an extremely cold one). In addition to this, the compressed air can enter the spin chamber tangentially, leading ...
Meech International
The flexible heating jackets are constructed from heating tape and insulation and are suitable as trace heaters for customer pipes, also pre-shaped pipes. Heating of bundles of pipes is also possible. The HFM heating jackets are slid ...
Hillesheim GmbH
Temperature limit: 1,600 °C
ZIRCAR Ceramics’ Alumina Blankets Type NAB & Type NMB are mechanically-needled blankets made from shot-free, high-purity polycrystalline alumina fiber (PCW) for use in numerous applications with continuous temperatures as high as 1600°C ...
ZIRCAR Ceramics
Power: 50 W - 750 W
•Low pressure applications. •Post type terminals. •Specify ‘SF3’ for alternate style. Optional Fittings Baking, Drying, Laminating, Metal Working, Packaging, Plastic Welding, Preheating,Sealing, Soldering, Shrink Fitting, Synthetic ...
Backer Hotwatt Inc
XIZICE (formerly HBG), one of the earliest manufacturers engaged in HRSG design and development in China, made the first localized heat recovery steam generators in China for 9H, 9F, 9E, 6F and 6B class gas turbines. It has been awarded ...
Xizi Clean Energy
Whether you choose an external Preheater with a Single Facer or a Triplex Preheater: With Preheaters from BHS Corrugated, you reach the desired process temperatures and required tension in the papers with equal reliability. This results ...
BHS
VoltageV120/30 Power consumptionW2200/2300/3300 FrequencyHz50/60 Max. temperature°C650 Min. air flowl/min240/370 Air connectionmmØ 19 Air outletmmØ 22 Dimensions (l x w x h)mm225 x 69,5 x 58 Weightkg0,5
BAK Technology Ltd.
The FCB Zero-NOx Preca can be used with a wide variety of fuels (oil, coal, natural gas, petcoke, anthracite) and a high proportion of AFR (oils and solvents, plastic, wood or tyre chips). Already reaching less than 500 mg/Nm³ NOx ...
Fives
Power: 1 W
● Mobile terminal and content management system: GPS and GLONASS dual mode positioning, wireless and wired transmission,available for voice intercom ● Android 6.0 Marshmallow and voice input available ● Designed with touch screen and ...
There are three standard sizes for the basic Frigid-X™ vortex tubes – the mini size which uses 2, 4 or 8 SCFM, the most common (medium) size which uses 10, 15, 25, 30 and 40 SCFM, and the large sizes which use 50, 75, 100 and 150 SCFM. ...
Nex Flow Air Products Corp.
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining