The open-air heating mat is used to counteract the formation of ice on pavements, stairs and ramps. This solution not only saves you time and work, but also helps you to reliably fulfil your winter maintenance obligations at all times - even when you ...
Warm-On
Agitator vessel with thermal oil jacket and electric heating system for the circulating oil (indirect heating).
The ACTE COMPACT-type heat recuperators are at the cutting edge of micro gas turbine recuperator technology. Combining performance, lifetime and compactness, optimising micro gas turbine efficiency becomes easier and sustainable.
ACTE
Temperature: 40 °C
Electrical process heaters are designed for efficiently heating liquid or gaseous flowing fluids. The design is based on the general conditions such as the type and properties of the respective fluid, pressure and temperature as well as the desired operating ...
heatsystems GmbH & Co. KG
Temperature: 0 °C - 390 °C
Pressure: 0 bar - 39 bar
... Your Choice for Industrial Steam Air Heating Solutions Our steam air heater is a reliable and efficient solution for heating air in industrial processes. It is designed to operate with steam at a maximum pressure of 39 bar and a maximum temperature ...
... We design and manufacture a range of Quality hot water tanks, for use with heat pumps, electrical elements, steam, and waste heat. Our standard tanks are rated for either 400kPa or 600kPa and up to 95ºC, with custom tanks also available. SANS 347 All ...
... NOZZLE HEATERS Heaters of different types of usable thermoplastic molds, presses and any equipment for plastic injection. Excellent mechanical qualities, tear-resistant cables for high temperature, excellent heat exchange with the lower heat dispersion. Wide ...
ELMITI
Power: 10, 20, 15 kW
Steam production: 0 kg/h - 28 kg/h
Pressure: 5 bar - 13 bar
... Housing Base frame and hood made of stainless steel with integrated switch cabinet. Boiler casing Casing made of stainless steel 1.4571, electrically welded. Electrical equipment Control panel wired in accordance with VDE regulations (Association ...
Power: 1,400 kW - 29,200 kW
Pressure: 8 bar - 10 bar
... YLW series coal-fired/biomass-fired thermal oil heater Thermal oil Product thermal capacity: 1400-29000 KW Working pressure: 0.8-1.0 MPA Outlet temperature: 320 °C Available fuel: Bituminous coal, anthracite, biomass particles Available industries: Chemical,high ...
Wuxi Zozen Boilers Co., Ltd.
... Because of providing constant water temperature no need to lukewarm No hot water problem with 12 liter capacity in winter Water temperature stays constant at the low water level. Because of small dimensions, living quarters improve. Operates with ...
DAXOM / NAVIDENS
Temperature: 1,000 °C
Durex Industries’ Rapid Fire aluminum nitride (AlN) ceramic heater solutions combine the thermal conductivity of aluminum and dielectric strength of specialty ceramics with physical properties similar to stainless steel. Additionally, a tungsten (W) RTD ...
Durex Industries
Ammonia absorption cycle in water was invented in the mid of 19th century, the actual industrial revolution in refrigeration. Zudek is studying ammonia absorbers for years. When we entered the market, we found there were just kinds of ammonia machines: ...
... Plants that require smokeless flares where steam is not preferred use our state-of-the-art, air-assisted flare systems for cost-effective, smokeless flaring. Our long-lasting flares use a range of innovative techniques to optimize air-to-gas mixing ...
John Zink
... Excellent Warranty - one year on the heat exchanger ASME Section VIII and U Stamp certifications Minimum Floor space requirement Compact fully assembled packaged system Vertical or horizontal orientation Up to 460gpm with an 80 degree temperature rise Safety ...
When it comes to infrared emitters, the choice of different frequency depends on several characteristics like material absorbency, heating necessities and speed and type of application. There is a gold reflector on the back side of the twin-tube emitter ...
The FWD range of air warmers is designed for use in small work or storage areas which are located in Zone 1 and 2 or Zone 21 and 22 Hazardous Areas where the flammable atmosphere is a IIA, IIB or IIC Gas Group.
EXHEAT Ltd
... Silicone Rubber Griffin Beaker Heaters - Ideal for Laboratory and Oil Bath Applications - Fits Griffin and standard size beakers - Provides even heat for Griffin and standard beaker heating applications - Removable with hook and loop fastener. ...
BRISKHEAT CORPORATION
For more effective heating, the IBC Container Heaters Kuhlmann Electro-Heat A/S drum, bucket, and cylinder heaters prove to be more efficient than conventional band heaters. For effective warming and insulating drums, pails, gas cylinders, buckets and ...
Kuhlmann Electro-Heat A/S
The PCT-1000 is a programmable preheater that provides users the ability to increase heat capacity with highly controlled thermal output. The PCT-1000 can be used in a variety of processes including soldering, desoldering, SMD rework operations and, with ...
METCAL
... Ceiling heat recovery system with an efficiency of 75% The Mark ERV heat recovery system is the ideal solution for energy efficient ventilation and a comfortable indoor climate. The appliance is equipped with a high efficiency counter flow heat exchanger ...
At the heart of most Thermofin heat exchanger’s technology, like in our famous line of generator and motor coolers, lies Thermofin’s aluminum extruded finned tubes, the lead actors on which rests the efficiency and longevity of our units. Their particular ...
Thermofin
... The flexible heating jackets are constructed from heating tape and insulation and are suitable as trace heaters for customer pipes, also pre-shaped pipes. Heating of bundles of pipes is also possible. The HFM heating jackets are slid onto the pipes ...
Hillesheim GmbH
... Wall hanging water heaters for bathroom installation. Available volumes 80, 100, 120 liters. Product Features CFC-free hard PU foam insulation with thickness of 20 mm and aesthetic steel case in RAL 9003 Storage tank made of enameled steel S235JR ...
NES - New Energy Systems
Open flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation. The EMR flares family includes units for biogas flows from 10 to 250 Nm3/hr and is characterized by compact ...
Progeco SRL
... Equipment designed for sweet water recovery, from the process of sweeting on/off of filters and decolorization process. This sweet water will be then forward to be reused in the dissolution process. Executes the separation of syrup with high and low ...
... Solar collectors from Schweizer can be employed practically anywhere. They can be installed quickly, cost effectively and as retrofits in open spaces, on sloping and flat roofs, or on façades. They transform solar energy effectively into heat, thus making ...
The HM mobile heating centres from Kroll support your heating project quickly and efficiently. Due to their high mobility and quick readiness for use, our mobile heating centres are used wherever heat is required and existing systems fail, are replaced ...
Kroll Energy GmbH
The hydrophore unit is pre-wired and tested before delivery to ensure its performance, the unit control functions can be customized and integrated into the system according to your needs and requirements. The hot water calorifier unit can be customized ...
Power: 12.5 kW
Empty weight: 180 kg
... Apply to laboratory simulation workshops dyeing process,steam braise solid-color,heat resin curing test was conducted,auxiliaries and other prescription pharmaceutical and industrial conditions,the machine can be used as solid-color and the dryer of printing. Made ...
Jingjiang Huaxia Technology Co., Ltd
Power: 25 W - 800 W
Temperature: 450 °C - 550 °C
... High Temperatures – right where they are needed. Metal flat heaters, designed for use in the temperature range up to 500°C, can be rapidly heated up and cooled down nearly as quickly as desired due to their robust construction and resistance to thermal ...
Power: 0 kW - 300 kW
Temperature: 900, 1,200 °C
Pressure: 16 bar - 100 bar
... ELMESS flow heaters are used for heating liquids and gases. They are manufactured to customer specifications in explosion-protected design (ATEX, IECEx, etc.) or in high-quality industrial design All heaters are designed and manufactured according ...
ELMESS Thermosystemtechnik GmbH & Co. KG
... ATW-P and ATW-V Producers are the solution to every problem of domestic hot water production on water storage. Thanks to the most advanced technologies and their constructive compactness, Termoleader’s producers place themselves as leaders in the sector ...
... construction: ceramic in stainless steel housing diameter: from 60mm width: from 20mm operating temperatures: up to 600˚C (or up to 7 W/cm²) connection voltage: 230V or 400V, or in accordance with the customer's wishes type of connection: with hook, ...
Our custom fiberglass-mesh heating mat combines ultra-lightweight and maximum flexibility with extraordinary strength. Areas of application include anti-icing of machines/equipment, fluid and airstream heating, and construction. They are easily embedded ...
Embro GmbH
Power: 0 W - 800 W
Temperature: 30 °C - 60 °C
Pressure: 0 bar - 7 bar
... REDUCTION of drying times BETTER stretching of clearcoats SAFE and regular work all the year around Self-learning function Overheating protection Automatic activation by flow switch Low temperature, there is no need for gloves In the new PACK ...
... Armstrong tank heaters are available in three standard configurations: Flange-Mounted Bayonet—Types BHC and BHS Base-Mounted Direct—Type BD These three configurations offer a range of choices to suit most area-coverage and thermal-performance requirements. ...
Armstrong International, Inc.
... Heat recovery unit Flow: 950 m3/h - 4.200 m3/h. Versions: 8 tamaos disponibles ...
FNP Group
Capacity: 1 m³ - 13 m³
... CONDENSATE TANK “GENERAL INFORMATION AND MATERIAL QUALITY • Our company is controlled and audited by EKOTEK, Brand registered and ISO 9001:2015 quality management system. • Welding processes are carried out by certified welders in accordance with approved ...
... Fresh air heat recovery unit Related introduction Heat recovery ventilator can help make mechanical ventilation more cost effective by reclaiming energy from exhaust airflows. With heat exchangers to heat or cool incoming fresh air, recapturing 60 ...