The Perun is a multi-functional illumination tool powered by a 3500mAh 18650 battery with a maximum output of 2,000 lumens. This compact, hands-free right-angle light boasts the third generation MCC which holds 1.5A current. When the built-in infrared ...
... A cost effective solution for challenging power density applications Are you under pressure to cool electronics with progressively higher heat density and reduced spaces but at the same time improve performance? In today’s most demanding applications ...
Aavid Thermalloy
... Description
EXAIR Vortex Tubes use compressed air to produce two separated airstreams—one cold, one hot—without moving parts. Temperature, flow and cooling power are adjustable to provide cold air from -50°F to +260°F (-46°C to +127°C). Constructed ...
... Overview
EXAIR's Adjustable Spot Cooler System (one cold outlet) includes everything needed for a single-point cooling station that provides a cost-effective, reliable, maintenance-free solution for a range of industrial spot-cooling needs. ...
... Description
A proven solution to reduce downtime and increase productivity on operations with small parts subject to heat. EXAIR's Mini Cooler™ produces a focused stream of cold air to prevent heat build-up on tools and parts. Effective for ...
... Overview
Short-wave infrared (short-wave IR) technology delivers extremely high controlled power densities, up to 500 kW/m². Quartz tubes heated above 2,000°C provide ultra-fast response (≈1 s) and deep penetration into materials, enabling simultaneous ...
... Overview
The ceramic emitters provide significant thermal inertia (several minutes) and are suitable for deep heating in industrial processes, in particular in the food industry.
Shapes
- Incurved or flat
- Rectangular
Power: 1 kW - 90 kW
Temperature: 0 °C - 95 °C
Pressure: 16 bar
... HBE tank heaters are used for preheating hydraulic oil and maintaining the operating temperature on hydraulic units.
The heaters are available in the following models: VR tank heaters with magnet clamps, PTHK screw-in cartridge heaters, RHK screw-in ...
Maximum temperature: 500 °C - 1,000 °C
Ceramic heated knifes made of silicon nitride can be produced in various sizes and shapes and adjusted to fit the dimensions of the material or surface to be cut. Typical shapes are ring knifes, rectangles with cutting edges and heated rails. The good ...
... he highly innovative SISE TPC - Electrically Heated Tube developed by SISE-Parmilleux from 1994 onwards meets the most exacting requirements for heating and heat-treating fluids; requirements such as : Extreme temperature and pressure conditions ...
Tempsens offer wide range of Silicon Rubber Heaters.
TEMPSENS
... Known for its versatility , ruggedness and dependability , tubular heaters can virtually be factory-configured to suit a variety of industrial heating applications. Sheath Material : Copper, Steel, 304 Stainless steel, INCOLOY, Titanium Watt ...
TEMPSENS
Power: 2,000 kW
Duct heaters are heat transferring devices which are an assembly of heating elements mounted in a frame or duct. Preferably used for non-pressurized air-heating systems, there are three types of duct heaters available: open coil, tubular or finned tubular ...
TEMPSENS
Power: 0 kW - 8 kW
Temperature: 0 °F - 1,500 °F
Pressure: 0 psi - 25 psi
The Serpentine Triple Pass heaters are modular field replaceable air heater products commonly used in OEM applications. The popular air heater element consists of a versatile Serpentine coil that fits into a stainless steel “triple-pass” exchange housing ...
TUTCO SureHeat
Power: 0 W - 24,000 W
Temperature: 0 °C - 900 °C
Pressure: 0 bar - 10 bar
Threaded in-line air heaters are UL Recognized products designed for industrial process heating applications requiring high-heat and high air pressure. Serpentine™ heating elements are installed into a 304 stainless steel housing and threaded at both ...
TUTCO SureHeat
Power: 0 kW - 4 kW
Temperature: 0 °C - 760 °C
Pressure: 0 bar - 4 bar
Hot Air Tools are multi-purpose electric air heaters with a built-in thermocouple for precise temperature control. The compact size makes this product perfect for single phase OEM applications with closed loop control. Its 304 stainless steel body construction ...
TUTCO SureHeat
... Product Description touchless heating of plastic sheets for bending ...
Capacity: 100 l - 1,000 l
Stable cooling tanks HNP are made of environmentally friendly materials, they work with ecological coolants, they have low energy consumption and most importantly they are efficient. Stable cooling tanks HNP are indispensable for the production of high ...
... Provides heat to the base of steel or plastic 205L drums and smaller containers May be used individually, or with other LMK Heating products Uses the same technology as the proven Thermosafe Induction Heater Suitable for use in Zone 1 & 2 rated hazardous ...
LMK Thermosafe Ltd
... We offer three ranges of Flexible Heating Jacket for standard sizes 25L up to 205L drums: Standard, HiHeat and High Power. The Standard range Ideal for gently heating and maintaining temperatures up to approximately 40-45°C. Polyurethane coated ...
LMK Thermosafe Ltd
... Tried and tested the World over, our Flexible Heating Jackets simply wrap around the tank, clip together and the thermostat can be set to the desired temperature. Single-circuit ‘IBC1’ modelIBC1 Flexible Heating Jacket For gentle warming. Avoid ...
LMK Thermosafe Ltd
Premium infrared emitter with a high performance nanoamorphous carbon membrane. This achieves membrane temperatures of up to 850 °C for high and long-term stable radiation output. The JSIR 350 IR emitter is ideal for various gas analysis applications ...
Micro-Hybrid Electronic GmbH
Premium infrared emitter with a high performance nanoamorphous carbon membrane. This achieves membrane temperatures of up to 850 °C for high and long-term stable radiation output. The JSIR 350 IR emitter is ideal for various gas analysis applications ...
Micro-Hybrid Electronic GmbH
Premium infrared emitter with a high performance nanoamorphous carbon membrane. This achieves membrane temperatures of up to 850 °C for high and long-term stable radiation output. The JSIR 350 IR emitter is ideal for various gas analysis applications ...
Micro-Hybrid Electronic GmbH
Power: 0 kW - 672 kW
Temperature: 0 °F - 550 °F
... In line water heaters (a.k.a circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead of stripping the heat from another source as it would for a heat ...
WATTCO
Circulation Heaters, also known as “in line heaters,” have uses in many applications. They can use steel, stainless steel, or titanium depending on the application. Lube oil and waste oil applications often use steel for circulation heaters. This is because ...
WATTCO
Power: 650 kW
Temperature: 1,000 °F
In line heaters (a.k.a circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead of stripping the heat from another source as it would for a heat exchanger, ...
WATTCO
The Proton InteliTHERMTM Spectral Radiation non contact wire Temperature Gauge is now available for use with new or existing preheaters. Proton Preheaters have a high degree of accuracy during preheating, however for some applications when temperature ...
Proton Products Inc
The ProTHERMIC PH Series are a comprehensive range of High Frequency induction Preheaters featuring the latest advanced High Frequency solid state technology. Wire preheating is an essential operation to achieve elimination of wire moisture, improve stripping ...
Proton Products Inc
The ProTHERMIC PH Series are a comprehensive range of High Frequency induction Preheaters featuring the latest advanced High Frequency solid state technology. Wire preheating is an essential operation to achieve elimination of wire moisture, improve stripping ...
Proton Products Inc
Power: 450 W - 2,000 W
Temperature: 650 °C
Pressure: 0 bar - 6 bar
... • Housing made from stainless steel; connection chromedbrass • Length of the connection cable and thermocouple line 1,5 mtr. • Air hose available per meter • Other voltage available on request ...
Herz GmbH
Power: 435 W - 800 W
Temperature: 0 °C - 600 °C
... The short one for direct installation! With mounting thread directly in the housing. Smallest installation height despite air hose with internal connection line. The perfect device for confined spaces and installation positions. Voltage [VAC] - ...
Herz GmbH
Power: 450 W - 800 W
Temperature: 600 °C
... Different voltages, power and special versions, such as external activation via controller or SPS possible. Available on request!!! - 24 month warranty (except wear parts) Voltage [VAC] - 230 Frequency [hz] - 50/60 Current [A] - 1,9 - 3,5 Min. ...
Herz GmbH
A Flare System is a safety and emission control device designed to safely burn off flammable or toxic gases released during process upsets, startups, shutdowns, or maintenance. By converting harmful hydrocarbons into carbon dioxide and water vapor through ...
The fire blankets are made of fire retardant glass fibre fabric and, together with portable fire extinguishers and hydrants, form an essential part of the fire-fighting equipment used in small domestic fires, as they suffocate flames and incipient fires. ...
TEXPACK
Temperature limit: 650 °C - 1,050 °C
Biotex® blankets reinforced with glass threads are made using Biotex® cloth and are available in standard sizes. Perfectly edged, on request they can be provided with steel eyelets. The Biotex® cloth is soft to the touch and resistant. It is available ...
TEXPACK
Temperature limit: 650 °C - 1,050 °C
Ceramic blankets reinforced with glass threads are made using Ceramic cloth and are available in standard sizes. Perfectly edged, on request they can be provided with steel eyelets. The Ceramic cloth is soft to the touch and resistant. It is available ...
TEXPACK
Power: 15 kW - 3,000 kW
Steam production: 20 kg/h - 4,500 kg/h
... The GE is an electric steam generator conceived for small consumption, installation in clean environments or supplying high purity steam. It's main summed up characteristics are: Thanks to the experience accumulated over more than 60 years as well ...
ATTSU TERMICA S.L.
Power: 15 kW - 3,300 kW
Steam production: 15 kg/h - 15,000 kg/h
Pressure: 3.3 bar
... The GE INOX is an electric steam generator conceived for very small or small consumption, installation in clean environments or supplying high purity steam. It's main summed up characteristics are: Built with stanless steel AISI-316L Thanks to ...
ATTSU TERMICA S.L.
Power: 38 kW
Steam production: 50 kg/h
... The VL boiler is a clean steam generator that is horizontal. This boiler made of stainless steel uses dirtly steam, superheated water or thermal fluid to produce high purity steam. Its main features are the following: This equipment is completely ...
ATTSU TERMICA S.L.
... Knife disinfection tank with electrical resistance, with and without overflow. Features: Capacity for 12 knives. Disinfection system by heating the water up to 82°C. DT30 and DT30R To be fitted to HW11 washbasins. DT31 and DT31R For wall installation. Made ...
... Knife-holder disinfection tank with electrical resistance. Features: Heating by 6000 W electric resistance with thermostat. Water inlet valve ¾ ”outlet 1”. ...
... Disinfection tank for 2 knife holders with electrical resistance. Features: Electric resistance 750 W. Capacity for 2 knife holders. Disinfection system by heating the water up to 82°C. With thermostat and overflow. Made of stainless-steel AISI-304. ...
Capacity: 3 l - 50 l
... Our jacketed vessels are perfect for warming or cooling material. They are available from stock in a wide variety of sizes from 3 litres to 50 litres. They are entirely made from 316L stainless steel with a silicone O ring. Cool or warm water can be ...
... The shower water heating system has been designed and developed for the polar and modular cubicle for use in extreme freezing conditions but can be used for other applications for the supply of tepid water. The water heating system meets the requirements ...
Temperature limit: 1,400 °C
ZIRCAR Refractory Composites, Inc. insulating blankets are non woven, inorganic, fiber-based products that contain no asbestos. They are engineered for use as thermal barrier materials in high temperature applications up to 1400°C (2550°F). Commonly used ...
Temperature limit: 1,100 °C
... ZIRCAR Silica Blanket Type SB-2000 is a high temperature insulation blanket made of mechanically interlocked continuous filament amorphous silica fibers with useful properties to temperatures of 1100°C (2012°F). SB-2000 is a strong needled blanket ...
Temperature limit: 1,260, 1,427 °C
ZRCI Alumina-Silica Blanket Types RSBL-2300 and RSBL-2600 are mechanically-needled ceramic-fiber blankets that provide effective solutions to a variety of thermal management problems. RSBL-2300 and RSBL-2600 blankets exhibits good strength and handleability. ...
Power: 3,000 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar
... The industrial hot air device type 3000-E is the optimal air heater for production processes. Our air heaters are durable and suitable for continuous operation, for example in production machines. There are two versions of the air heater type 3000-E ...
Forsthoff
Power: 1,800, 2,400, 3,000, 3,600 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar
... The Type 3000 industrial air heater produces constant hot air in continuous operation. Despite providing strong hot air performance, the small and lightweight air heater enables integration into expert production processes. The air heater type 3000 ...
Forsthoff
Power: 3,000, 5,000, 5,100, 6,000, 7,500 W
Temperature: 20 °C - 700 °C
Pressure: max 1.0 bar
... The industrial air heater type 5000 continuously produces hot air at a constant temperature. The compact and lightweight air heater enables integration into professional production processes despite its high hot air output. The air heater type 5000 ...
Forsthoff
Pressure: 80 psi - 100 psi
... Versatile Spot Cooling for Machining, Repair Shops and More Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F for numerous industrial spot cooling applications. With no moving parts ...
ITW Air Management
Pressure: 80 psi
... Versatile Spot Cooling for Machining, Repair Shops and More Cold Air Guns use vortex tube technology and filtered compressed air to produce sub-freezing air as low as -30 deg F (-34 deg C) for numerous industrial spot cooling applications. With no ...
ITW Air Management
Pressure: 80 psi - 100 psi
... The Frost Free Cold Air Gun eliminates the mess associated with condensation and frost arising from continuous use of a Cold Air Gun. A must–have for sensitive applications such as: Cutting, drilling or machining of paper products, wood products, fabrics ...
ITW Air Management