Other inspection and monitoring equipment

Live LV cable identifier Use This device provides all the information necessary to identify a live LV cable among other cables without risk of error : Identification of cables in open trenches or tunnels. Identification of the three ...

Handheld & Highly Accurate The LI-19 Handheld Datalogger & Read-Out is compatible with analog EKO irradiance sensors and heat flux sensors. Universal analog input & USB interface Internal memory for stored data Uses standard AA ...

DL1S Data Logger (RS485) DL1S is design to communicate through RS485 to read variety of devices (Such as instrumentation, PLC, A / D conversion card...) and stored the data collected into a SD card .Data can then be converted to Excel ...

i3E Intelligent Control Station. As with all models of the i3 Series, the i3E brings you a combination of HMI and PLC functionality in a compact and handy unit, that offers MicroSD data storage, a real-time clock, IP65 (NEMA 4X) protection ...

Memory capacity: 32,000 unit

* Bluetooth and USB connection * Flight mode for air transportation * Large LCD screen with powerful indicators * Automatically generate PDF report and CSV file * External temperature probe for low temperature condition * FDA 21 ...

Memory capacity: 32,000 unit

• 21 CFR part 11 compilant • Statistics available on LCD screen • USB Interface for Set-Up and Data Download • Programmable software for Log Interval. Alarms, and Start Delay Products - Single-use PDF Temp Data Logger Connectivity ...

The electronic sentinel is an underground, integrated alarm device that combines sound and vibration sensors. It is primarily used for: Monitoring and alerting when individuals approach, capable of sensing activities such as talking, ...

The SPARK PRO Handheld Light Source (HLS) is an advanced LED illumination device that provides superior lighting for medical and veterinary examinations using rigid and flexible optical endoscopes and borescopes. The device integrates ...

SPARK XTR is a new advanced LED light source for optical borescopes offering excellent illumination and intuitive operation regardless of inspection conditions, due to a specially designed focal lens, one-button control over light output ...

The MS-LED borescope is an extremely compact and lightweight unit with very high output efficacy that is ideal for industrial applications where space is limited. MS-LED spectral output below 430nm (deep blue and UV) and above 700nm ...

The Milli-Speed Switch with 4 - 20 mA output is designed to detect belt slip, belt underspeed, stop motion, low speed or zero speed on bucket elevators, conveyors, airlocks, mixers, fans, grinders and many other rotating machines. Totally ...

The Watchdog Super Elite (WDC4) is a combined belt alignment, belt speed, continuous bearing temperature, pulley alignment and plug condition monitor for bucket elevators and conveyors. The WDC4 has inputs for most of the types of sensors ...

An easy-to-use inductive proximity shaft speed monitoring device with an adjustable 0 - 30 second start-up delay, all housed in a 30 mm diameter moulded body. The self-contained unit has a single set point, which signals when the shaft ...

3-AXIS SHOCK & VIBRATION DATA LOGGER Recovib Tiny 200G PROPERTIES 3 axis DC to 250Hz useful bandwidth Low noise 5-hours battery autonomy (1024 samples/second) 2 GB storage capacity Wireless during vibration measurements Compact ...

The Recovib.Monitor devices are industrial grade multi-purpose acquisition and monitoring systems. They provide a full embedded solution for connecting up to eight sensors (current loop, IEPE, single-ended/differential voltage) to a hardware ...

SONAPHONE - The New Device Class for Preventive Maintenance Meet the challenges of Maintenance 4.0 with the new SONAPHONE from SONOTEC. The digital ultrasonic testing device combines innovative sensors and software for preventive maintenance ...

Calibration Target Micro V1 Optical calibration and resolution testing are critical metrics in understanding and optimizing any optical system. Calibration Target Micro V1 is unique in that it combines very useful resolution data, ...

The stage micrometer from Opto in the form of a microscope slide is required for the calibration of microscopes. - Glass scale 50 mm in 0.1 mm and 0.01 mm - Calibration of measurement software The stage micrometer is also available ...

IM•stand light IM-stand light, designed and manufactured by Opto GmbH in Germany, is especially designed for the Imaging Modules. Equipped with a coarse/fine focus drive, which can be adjusted in height, the stand is available ...

The intelligent Ethernet data logger with analog inputs and digital I/O MSX-ilog-3016-DIO40 has 16 differential analog inputs, 16-bit, with a transfer rate of 200 kHz as well as 36 digital inputs, 24 V. Four additional 24 V digital outputs ...

The intelligent Ethernet data logger with 16 analog inputs MSX-ilog-3016 has 16 differential inputs, 16 bit, with a throughput rate of 1 KHz per channel. It was developped for the long-term data acquisition in the field and data visualisation ...

The intelligent Ethernet data logger for temperature measurement MSX-ilog-RTD has 16 differential inputs for resistance temperature detectors (RTD, Pt100/Pt1000). The parametering and visualisation of the measured values are carried out ...

Intexs original LED high CRI products. We have 5000K and 6500K LED lamp. Our advantage is waveness control and manage CRI performance, u'v' position and metamerism index. You can choose those function to make priority. This is quite ...

SensNode-NB-Node Waterproof NB-IoT Sensor Node The NB-IoT Sensor Node is a sensor node designed for Long Range NB-IoT applications. It is ideal for outdoor data logging and operates on an 8500mAh Li/SOCl2 battery, making it perfect for ...

SensNode-LR-DL LoRaWAN® Data Logger Analog / I2C / UART / RS485 SensNode-LoRaWAN Data Logger can connect to MODBUS-RTU RS485/Analog/GPIO sensors and transmit data from sensors to the LoRaWAN network. Benefits from LoRa and IP66 design, ...

Distinct connectivity to automation systems and bus technologies The iba bus monitors make it possible to connect to different field bus and drive technologies. - Monitoring and recording of data traffic between automation and peripherals ...

Focal length: 90 mm - 500 mm

Objective tubes are available either with fixed distance settings or with variable focus adjustment. The variable focus adjustment is realized by tube extension. Focusable objective tubes are used where discrete distances have to be focused ...

The Aquavx™ ProPlus builds on the premium features of the Aquavx Pro, offering even more configuration and control options as well as duplex pump control. It is powered by the RemoteIQ™ Water cloud platform for real-time monitoring and ...

The Messenger BLE provides two-way communication on remote equipment. The telemetry monitoring system is supported by Bluetooth, cellular and satellite communication coverage and works with electronic engine controllers, ECUs, devices ...

The Messenger Lite is a compact, remote monitoring device for diesel-driven engine equipment using a CANbus. The small form factor allows for easy, inconspicuous mounting and firmware updates can be easily made across the entire fleet. ...

E-690 Series universal data loggers/scanners are advanced new generation micro-controller based industrial instruments. The universal inputs and outputs of the instrument can be easily programmed by the user. E-690 Series indicate measurements ...

E-680 Series universal data loggers/scanners are advanced new generation micro-controller based industrial instruments. Dimensions are 96 x192 mm, conforming to IEC 668. The universal inputs and outputs of the device can be easily programmed ...

Switchable light source with UV/ white light with a 150W DC Super Pressure Short Arc Mercury Lamp. Allows to be used in aeronautics, aerospace and automotive industries for fluorescence inspection and non-destructive testing (NDT). This ...

Output power: 10 W

Our LED-R portable high intensity uses the LED technology and delivers a high intensity white light ideal for endoscopic applications. It offers a continuous light intensity adjustment for optimal comfort of use in any situation. LED ...

Output power: 80 W
Wavelength: 400 nm - 700 nm

Our Endo-lux-T is a compact and powerful (80 watts) table light source with LED technology. It comes with a continuous light adjustment knob and a standard RIWO output. It is compatible with video and photo applications and can be ...

Dual channel equipment for absolute vibration monitoring The TM1 equipment continuously measures the vibrations of rotating machines by supplying analog outputs (for interfaces to PLC or DCS) or digital outputs (alarm and trip contacts) ...

Vibro-alarm equipment with one alarm thresholds T1-45 supplies a digital output (ON-OFF) when exceeding a settable level of vibration. It can be interfaced directly to PLC.

723PLUS Digital Control Applications The Woodward 723PLUS Digital Control manages and controls reciprocating engines (gas, diesel, or dual fuel) used in power generation, marine propulsion, and gas compression/ distribution. The control ...

ClearVision quality assurance cameras for the Corrugated industry can inspect up to 6 features of every single box such as glue patterns, codes readability, printing, correct position of scorelines... to guarantee defect-free boxes delivery ...

Valco Melton's JP2000 electronically monitors product to detect slippage and butted or overlapped occurrences. When a preset product slippage allowance is exceeded, the JP2000 will interrupt product feed and stop the machine. Lights on ...

Valco Melton's AS sensors have an 8mm sensing area that is capable of seeing the thinnest glue lines. Regardless of background color or box surface, the AS302 reliably detects any adhesive patterns, even stitching or dotting when coupled ...